Veeder-Root TLS-450 Quick start guide

Manual No: 577014-048 •Revision: C
Upgrade Instructions
TLS-450 To TLS-450PLUS Console

ii
Notice
Veeder-Root makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
Veeder-Root shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing,
performance, or use of this publication.
Veeder-Root reserves the right to change system options or features, or the information contained in this publication.
This publication contains proprietary information which is protected by copyright. All rights reserved. No part of this publication may be
photocopied, reproduced, or translated to another language without the prior written consent of Veeder-Root.
Contact TLS Systems Technical Support for additional troubleshooting information at 800-323-1799.
DAMAGE CLAIMS / LOST EQUIPMENT
Thoroughly examine all components and units as soon as they are received. If any cartons are damaged or missing, write a complete
and detailed description of the damage or shortage on the face of the freight bill. The carrier's agent must verify the inspection and sign
the description. Refuse only the damaged product, not the entire shipment.
Veeder-Root must be notified of any damages and/or shortages within 30 days of receipt of the shipment, as stated in our Terms and
Conditions.
VEEDER-ROOT’S PREFERRED CARRIER
1. Contact Veeder-Root Customer Service at 800-873-3313 with the specific part numbers and quantities that were missing or
received damaged.
2. Fax signed Bill of Lading (BOL) to Veeder-Root Customer Service at 800-234-5350.
3. Veeder-Root will file the claim with the carrier and replace the damaged/missing product at no charge to the customer. Customer
Service will work with production facility to have the replacement product shipped as soon as possible.
CUSTOMER’S PREFERRED CARRIER
1. It is the customer’s responsibility to file a claim with their carrier.
2. Customer may submit a replacement purchase order. Customer is responsible for all charges and freight associated with
replacement order. Customer Service will work with production facility to have the replacement product shipped as soon as
possible.
3. If “lost” equipment is delivered at a later date and is not needed, Veeder-Root will allow a Return to Stock without a restocking fee.
4. Veeder-Root will NOT be responsible for any compensation when a customer chooses their own carrier.
RETURN SHIPPING
For the parts return procedure, please follow the appropriate instructions in the "General Returned Goods Policy” pages in the
"Policies and Literature" section of the Veeder-Root North American Environmental Products price list. Veeder-Root will not accept
any return product without a Return Goods Authorization (RGA) number clearly printed on the outside of the package.
©Veeder-Root 2021.All rights reserved.

Table of Contents
iii
Introduction
Contractor Certification Requirements ..............................................................................1
Safety Precautions ............................................................................................................1
Safety Warnings ...............................................................................................................2
Related Documents ..........................................................................................................2
Documents Required to Install Equipment ...............................................................2
Reference Manuals ..................................................................................................2
Perform A Database Backup
Precautions Against Static Electricity ................................................................................3
Before Turning Off Power .................................................................................................3
Preparing The TLS-450 Console For Upgrade
Removing The Display Door .............................................................................................6
Removing The CPU Board .............................................................................................10
Comm Module Upgrades ................................................................................................12
Installing New TLS-450PLUS CPU Board ......................................................................14
Installing New TLS-450PLUS Display Door ....................................................................16
Initializing The TLS-450PLUS Console After The Upgrade ................20
Figures
Figure 1. USB/Ethernet Board - V-R Thumbdrive Port ..........................................3
Figure 2. Accessing Diagnostic Main Screen From The Home Screen .................4
Figure 3. Software Maintenance Button .................................................................4
Figure 4. Initiating A System Backup .....................................................................5
Figure 5. Opening The TLS-450 Console Doors ...................................................6
Figure 6. Removing Optional Printer Cable ...........................................................7
Figure 7. Removing The Three Display Panel Cables ...........................................8
Figure 8. Disconnect The Ground Wire From The Display Door ...........................9
Figure 8. Locating CPU Board Retention Snap-Pins ...........................................10
Figure 9. Locating TLS-450 CPU Board Reusable iButton ..................................11
Figure 10. Removing Comm Module Clamp ..........................................................12
Figure 11. Install Ethernet Module In Slot 4 ...........................................................12
Figure 12. Install USB/Wireless Module In Slot 5 ..................................................13
Figure 13. Replace Comm Module Clamp And Securing Screw ...........................13
Figure 14. Insert iButton In Socket On New TLS-450PLUS CPU Board ...............14
Figure 15. Install iButton Flange Facing Up ...........................................................14
Figure 16. Remove TLS-450PLUS CPU Board Battery Isolator Strip ...................14
Figure 17. Connect Ethernet Cables ......................................................................15
Figure 18. Connect Wireless Cable .......................................................................15
Figure 19. Connect USB Module Cables ...............................................................16
Figure 20. Connect Optional Printer USB Cable ....................................................16
Figure 21. Install The New TLS-450PLUS Display Door .......................................17
Figure 22. Connect The Ground Cable ..................................................................17
Figure 23. Connect Data Display And LED Backlight Cables To CPU Board .......18
Figure 24. Locating SD Card On CPU Board ........................................................18
Figure 25. Installing SD Card .................................................................................19

1
Introduction
This manual contains procedures for a TLS-450 to TLS-450PLUS console upgrade. The instructions herein assume
all site monitoring devices have been previously installed and site wiring is complete.
Contractor Certification Requirements
Veeder-Root requires the following minimum training certifications for contractors who will install and setup the
equipment discussed in this manual:
Installer Certification (Level 1): Contractors holding valid Installer Certification are approved to perform wiring
and conduit routing; equipment mounting; probe, sensor and carbon canister vapor polisher installation; wireless
equipment installation; tank and line preparation; and line leak detector installation.
Technician Certification (Level 2/3): Contractors holding valid Technician Certifications are approved to
perform installation checkout, startup, programming and operations training, system tests, troubleshooting and
servicing for all Veeder-Root Series Tank Monitoring Systems, including Line Leak Detection. In addition,
Contractors with the following sub-certification designations are approved to perform installation checkout, startup,
programming, system tests, troubleshooting, service techniques and operations training on the designated system.
•Wireless2
• Tall Tank
Warranty Registrations may only be submitted by selected Distributors.
Safety Precautions
The following safety symbols may be used throughout this manual to alert you to important safety hazards and
precautions
EXPLOSIVE
Fuels and their vapors are extremely explosive if ignited.
FLAMMABLE
Fuels and their vapors are extremely flammable.
ELECTRICITY
High voltage exists in, and is supplied to, the device. A
potential shock hazard exists.
TURN POWER OFF
Live power to a device creates a potential shock hazard.
Turn Off power to the device and associated accessories
when servicing the unit.
WARNING
Heed the adjacent instructions to avoid damage to
equipment, property, environment or personal injury.
READ ALL RELATED MANUALS
Knowledge of all related procedures before you begin
work is important. Read and understand all manuals thor-
oughly. If you do not understand a procedure, ask some-
one who does.
USE SAFETY BARRICADES
Unauthorized people in the work area are dangerous.
Always use safety cones or safety tape to block access
to the work area.
STATIC SENSITIVE COMPONENTS
Wear grounded anti-static wrist strap before handling
the printed circuit board and mounted components.
OFF

Introduction Safety Warnings
2
Safety Warnings
Related Documents
DOCUMENTS REQUIRED TO INSTALL EQUIPMENT
This equipment must be installed according to the applicable installation document:
REFERENCE MANUALS
577014-073 TLS-450PLUS Console Site Prep And Installation Manual
WARNING
This console contains high voltages which can be lethal. It is also connected to low
power devices that must be kept intrinsically safe.
FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS AND SAFETY
PRECAUTIONS COULD CAUSE DAMAGE TO PROPERTY, ENVIRONMENT,
RESULTING IN SERIOUS INJURY OR DEATH.
1. Turn off and tag and lockout power at the circuit breaker while performing this
upgrade.
Equipment
ATEX
Descriptive System
IECEx
Descriptive System
UL/cUL
Control Drawing
Document No. Document No. Document No.
Associated Apparatus
TLS-450PLUS 331940-006 331940-106 331940-008
Intrinsically Safe Apparatus for Wireless Applications
Tank Gauge Accessories 331940-005 331940-105 331940-012
OFF

3
Perform A Database Backup
Precautions Against Static Electricity
Before removing electronic components from their anti-static bags read the following static electricity precautions.
1. Before handling any components, discharge your body's static electric charge by touching a grounded
surface.
2. Do not remove parts from their anti-static bags until you are ready to install them.
3. Do not lay parts on the anti-static bags! Only the insides are anti-static.
4. When handling parts, hold them by their edges and their metal mounting brackets.
5. Avoid touching components or edge connectors that plug into slots and wear the anti-static wrist strap (Part
No. 576010-908) included in your component replacement kit.
6. Never slide parts over any surface.
7. Avoid plastic, vinyl, and Styrofoam in your work area.
Before Turning Off Power
Before powering off the console perform a system backup:
1. Insert the V-R Backup Thumbdrive (P/N 332970-004) in the external USB port on the USB/Ethernet card,
P/N 332913-001 (see item 2 in Figure 1).
Figure 1. USB/Ethernet Board - V-R Thumbdrive Port
LEGEND FOR NUMBERED BOXES IN Figure 1
1. USB/Ethernet board bracket
2. V-R thumbdrive plugged into USB port
3. Comm slot positions (left to
right)
1
2
12345
3
NOTE: You will need
the V-R Backup
Thumb drive with the
system backup to
perform a system
restore once the
hardware migration is
completed. The
migration will not be
finalized until a system
restore is performed
as described on Page
20.

Perform A Database Backup Before Turning Off Power
4
2. Touch the Diagnostics button on the Home Screen (see item 2 in Figure 2).
Figure 2. Accessing Diagnostic Main Screen From The Home Screen
3. Touch the Software Maintenance button on the Diagnostic Maintenance screen (see Figure 3) to open the
Software Maintenance - Backup Restore tab screen (see Figure 4).
Figure 3. Software Maintenance Button
LEGEND FOR NUMBERED BOX IN Figure 2
1. Home Screen access button
2. Diagnostic Main Screen access button
09-21-2007
11-31-30
SYSTEM STATUS
Environment BIR
ALL TANKS
DeliveryInventory
USER DEFINED 3
ALL TANKS ALL SENSORS USER DEFINED 1 USER DEFINED 2
2
954-14.eps
1

5
Perform A Database Backup Before Turning Off Power
4. Touch the Backup button (item 1 in Figure 4) to begin the system backup process.
Figure 4. Initiating A System Backup
5. After the ‘Backup Completed Successfully’ message displays, you can safely remove the V-R Backup
Thumbdrive.
6. Print out or write down TLS-450 Ethernet settings.
7. Print out or write down all remaining TLS-450 communication port settings.
LEGEND FOR NUMBERED BOX IN Figure 4
1. Backup button
09-21-2007
11-31-30
Software Maintenance - Backup Restore
Backup
RestoreDownload Install
1Backup RestoreRevert to Previous
Software Versions
Prepare USB
Recovery
Drive
IDLE
954-18.eps

6
Preparing The TLS-450 Console For Upgrade
Removing The Display Door
1. Turn off, tag and lockout the breaker that supplies power to the console.
2. Open both doors to the left (see Figure 5).
Figure 5. Opening The TLS-450 Console Doors
LEGEND FOR NUMBERED BOXES IN Figure 5
1. Left (Printer) door
2. Using a T-15 Torx driver, remove the top and bottom screws
securing left door and swing door to left.
3. Right (Display) door.
4. Using a T-15 Torx driver, remove the top and bottom screws
securing left door and swing door to left.
OFF
1 2 4
2 4
954-1.eps
3

7
Preparing The TLS-450 Console For Upgrade Removing The Display Door
3. If a printer is installed, unplug the printer USB cable from the CPU board connector (see Figure 6).
Figure 6. Removing Optional Printer Cable
4. Unplug the Display panel’s Touchscreen control cable (3) Data cable (4), and LED backlight cable (5)
connectors from the CPU board (see Figure 7).

Preparing The TLS-450 Console For Upgrade Removing The Display Door
8
Figure 7. Removing The Three Display Panel Cables
LEGEND FOR NUMBERED BOXES IN Figure 7
1. Top Display door hinge shoulder screw
2. Grounding wire
3. Touchscreen control cable
4. Display data cable
5. LED/Display cable
6. Bottom Display door hinge shoulder screw
2
5
4
3
1
6

9
Preparing The TLS-450 Console For Upgrade Removing The Display Door
5. Disconnect the ground wire from the Display door at the grounding clamp.
Figure 8. Disconnect The Ground Wire From The Display Door
6. Remove the top and bottom Display door hinge shoulder screws and remove the door (items 1 and 6 in
Figure 7). Retain the two hinge shoulder screws for the TLS-450PLUS upgrade door.

Preparing The TLS-450 Console For Upgrade Removing The CPU Board
10
Removing The CPU Board
1. Locate the three retention snap pins along the front of the CPU board (see Figure 8).
Figure 8. Locating CPU Board Retention Snap-Pins
2. Remove the grounding wrist strap (Part No. 576010-908) from its package and wrap one end around your
wrist. Adhere the other end to a metal surface on the inside of the console.
3. Position your forefinger beneath one of the pins and press up releasing the CPU board from the snap pin
(see item 4 in Figure 8). Repeat at each of the remaining two retention pins.
LEGEND FOR NUMBERED BOXES IN Figure 8
1. Board retention snap pins
2. Compartment bulkhead.
3. CPU board backplane connector.
4. Use finger to pry board off snap pin.
RELAY RATINGSRELAY RATINGS 240 VAC, 2 A MAX240 VAC, 2 A MAX 24 VDC, 2 A MAX24 VDC, 2 A MAX
WARNING: TO MAINTAIN
INTRINSIC SAFETY, ALL
COVERS MUST BE IN
PLACE.
WARNING: TO MAINTAIN
INTRINSIC SAFETY, ALL
COVERS MUST BE IN
PLACE.
WARNING: TO MAINTAIN
INTRINSIC SAFETY, ALL
COVERS MUST BE IN
PLACE.
1
1
1
954-8.ep
2
3
4
1

11
Preparing The TLS-450 Console For Upgrade Removing The CPU Board
4. Tilt the board a little away from the bulkhead (item 2 in Figure 8) and grasping the edge of the board pull out
firmly to remove the board from its backplane board connector. Once the CPU board is free from the
connector, slowly remove the board from the console being careful not to hit the CF card against the door.
5. Place the TLS-450 CPU board on a clean work surface. Locate the iButton on the TLS-450 CPU board. This
component will be transferred to the new TLS-450PLUS CPU board.
Figure 9. Locating TLS-450 CPU Board Reusable iButton
U4
U4
C245
C245
U12
U12
Color LCD Interface
Color LCD Interface
Grayscale LCD Interface
Grayscale LCD Interface
38
38
37
37
14
14
VR Bus Termination
VR Bus Termination
8
8
C36
C36
D13
D13
FB4
FB4
U25
U25
9
9
8
8
35
35
10
10
35
35
R81
R81
C388
C388
A
A
1
1
U26
U26
7
7
C252
C252
D18
D18
K
K
C273
C273
C274
C274
C112
C112
1
1
U11
U11
U28
U28
D2
D2
A
A
K
K
7
7
1
1
D20
D20
C109
C109
C285
C285
C110
C110
C111
C111
1
1
1
1
C113
C113
7
7
U15
U15
D17
D17
C116
C116
A
A
C115
C115
TP6
TP6
K
K
C114
C114
D4
D4
A
A
C129
C129
L3
L3
K
K
R28
R28
C254
C254
R124
R124
D8
D8
K
K
1
1
D7
D7
A
A
R107
R107
1
1
14
14
TP16
TP16
J4
J4
1
1
37
37
C387
C387
J26
J26
C281
C281
C284
C284
C283
C283
TP3
TP3
C280
C280
L2
L2
C282
C282
J11
J11
1
1
R37
R37
R34
R34
EDGE CONNECTOR
EDGE CONNECTOR
+
+
C293
C293
R155
R155
27
27
D1
D1
28
28
A11
A11
A1
A1
38
38
B1
B1
2
2
B11
B11
C95
C95
C38
C38
R95
R95
C256
C256
C258
C258
L1
L1
TP1
TP1
C277
C277
C276
C276
C257
C257
C271
C271
U53
U53
C270
C270
C269
C269
1
1
8
8
2
2
7
7
38
38
R36
R36
1
1
37
37
TP9
TP9
4
4
1
1
5
5
J5
J5
J9
J9
C75
C75
C71
C71
C87
C87
C259
C259
10
10
14
14
26
26
8
8
TP4
TP4
C272
C272
8
8
5
5
U52
U52
FPGA JTAG
FPGA JTAG
9
9
J14
J14
1
1
4
4
1
1
2
2
R106
R106
8
8
C302
C302
14
14
7
7
U23
U23
K
K
A
A
U21
U21
1
1
1
1
5
5
1
1
Y5
Y5
1
1
U10
U10
7
7
C299
C299
C78
C78
1
1
30
30
5
5
26
26
1
1
U8
U8
R248
R248
30
30
48
48
F
F
R27
R27
C73
C73
RN4
RN4
U17
U17
5
5
1
1
RN5
RN5
RN1
RN1
RN3
RN3
54
54
RN2
RN2
R
R
1
1
1
1
2
2
4
4
6
6
L
L
N
N
G
G
J
J
1
1
10
10
8
8
12
12
1
1
16
16
14
14
T
T
M
M
P
P
H
H
K
K
29
29
R184
R184
R185
R185
1
1
4
4
R243
R243
19
19
28
28
C86
C86
1
1
R169
R169
R122
R122
R15
R15
C66
C66
C61
C61
1
1
14
14
U18
U18
C68
C68
C60
C60
R123
R123
C
C
E
E
A
A
1
1
3
3
5
5
7
7
R141
R141
R149
R149
13
13
9
9
11
11
B
B
D
D
R205
R205
15
15
R219
R219
R79
R79
R41
R41
25
25
24
24
1
1
48
48
15
15
C50
C50
C94
C94
C83
C83
U13
U13
J1
J1
1
1
U7
U7
24
24
J28
J28
25
25
1
1
2
2
C117
C117
4
4
U29
U29
9
9
C118
C118
18
18
R83
R83
U20
U20
10
10
TH1
TH1
R86
R86
16
16
R98
R98
1
1
8
8
1
1
R100
R100
Q7
Q7
R99
R99
9
9
C31
C31
R108
R108
U27
U27
R137
R137
R9
R9
R146
R146
R136
R136
C39
C39
R18
R18
R8
R8
1
1
Printer
Printer
5
5
4
4
C307
C307
FUD3
FUD3
P1
P1
U22
U22
C262
C262
D21
D21
K
K
J7
J7
50
50
40
40
TP77
TP77
C42
C42
5
5
U3
U3
8
8
10
10
15
15
20
20
C34
C34
J_USB1
J_USB1
R16
R16
R17
R17
1
1
L5
L5
A
A
25
25
Secondary
C308
C308
15
15
20
20
45
45
40
40
45
45
J6
J6
25
25
Primary
Q2
Q2
50
50
C103
C103
C249
C249
U24
U24
Console Port
Console Port
C57
C57
C53
C53
8
8
1
1
5
5
C301
C301
9
9
16
16
J32
J32
3
3
C275
C275
1
1
R229
R229
2
2
C98
C98
R119
R119
16
16
9
9
2
2
J18
J18
4
4
U30
U30
1
1
66Mhz
66Mhz
16
16
R222
R222
FB28
FB28
R221
R221
C88
C88
R132
R132
8
8
Y1
Y1
C128
C128
1
1
Z6
Z6
1
1
2
2
38
38
2
2
C130
C130
PORESET
PORESET
R29
R29
R190
R190
R235
R235
J2
J2
37
37
R192
R192
R188
R188
1
1
1
1
S4
S4
1
1
Touch Screen Header
Touch Screen Header
1
1
5
5
J10
J10
8
8
U32
U32
4
4
Z3
Z3
Z5
Z5
Z4
Z4
J20
J20
1
1
1
1
7
7
PQ2 JTAG
PQ2 JTAG
BD Group - CPU board - TLS-450 console
BD Group - CPU board - TLS-450 console
23
23
24
24
RN16
RN16
R20
R20
C24
C24
C177
C177
R350
R350
A14
A14
Z2
Z2
B14
B14
1
1
1
1
Z1
Z1
4
4
5
5
C2
C2
J12
J12
8
8
U19
U19
R126
R126
C25
C25
C26
C26
5
5
C1
C1
C4
C4
R3
R3
J29
J29
C221
C221
R44
R44
1
1
R118
R118
4
4
C137
C137
R61
R61
C341
C341
C305
C305
R348
R348
C381
C381
1
1
R59
R59
TP32
TP32
C176
C176
26
26
A62
A62
R117
R117
R114
R114
R115
R115
R104
R104
R238
R238
AB
AB
AD
AD
AF
AF
C204
C204
C203
C203
V
V
Y
Y
T
T
B62
B62
R236
R236
R241
R241
R191
R191
M
M
P
P
K
K
F
F
H
H
D
D
C239
C239
332878-001 Rev A
332878-001 Rev A
R233
R233
R129
R129
C294
C294
C386
C386
R153
R153
R145
R145
R116
R116
R232
R232
C246
C246
B
B
25
25
R163
R163
C241
C241
2
2
TP5
TP5
59
59
25
25
U2
U2
C27
C27
C20
C20
C28
C28
100
100
1
1
R6
R6
9
9
76
76
FB3
FB3
C15
C15
75
75
1
1
U5
U5
5
5
8
8
51
51
Y2
Y2
C9
C9
4
4
1
1
6
6
26
26
50
50
RN15
RN15
1
1
1
1
RN17
RN17
20
20
22
22
16
16
18
18
1
1
12
12
14
14
RN14
RN14
8
8
10
10
C7
C7
24
24
A
A
U6
U6
R76
R76
R152
R152
R217
R217
R212
R212
2
2
4
4
C238
C238
25
25
C183
C183
U14
U14
1
1
37
37
20
20
FB27
FB27
10
10
11
11
38
38
1
1
1
1
C240
C240
48
48
TP34
TP34
C304
C304
C237
C237
C207
C207
C
C
R
R
AC
AC
AE
AE
AA
AA
W
W
U
U
1
1
1
1
RN25
RN25
1
1
J
J
N
N
L
L
G
G
E
E
1
1
1
1
RN23
RN23
RN19
RN19
R69
R69
19
19
21
21
15
15
17
17
U1
U1
11
11
13
13
7
7
9
9
RN24
RN24
1
1
1
1
TP26
TP26
16
16
C225
C225
C215
C215
3
3
5
5
A
A
1
1
1
1
RN22
RN22
1
1
TP25
TP25
RN12
RN12
J48
J48
61
61
RN7
RN7
RN10
RN10
RN8
RN8
C243
C243
143
143
C362
C362
S2
S2
1
1
TH3
TH3
TOP/L1
TOP/L1
R144
R144
4
4
5
5
FUD1
FUD1
U31
U31
TP2
TP2
8
8
1
1
C296
C296
U51
U51
1
1
J3
J3
Y4
Y4
1
1
1
1
4
4
U33
U33
C383
C383
R210
R210
S1
S1
15
15
SRESET
SRESET
1
1
4
4
C384
C384
R48
R48
9
9
C55
C55
16
16
HRESET
HRESET
1
1
R250
R250
R211
R211
12
12
R154
R154
R181
R181
R162
R162
R161
R161
R159
R159
R203
R203
R209
R209
R202
R202
R201
R201
R47
R47
8
8
R46
R46
1
1
1
1
8
8
J23
J23
5
5
C92
C92
R128
R128
16
16
U16
U16
9
9
R127
R127
1
1
Unused Memctrl
Unused Memctrl
10
10
59
59
30
30
R174
R174
A
A
R62
R62
R56
R56
R55
R55
R54
R54
R347
R347
R176
R176
R7
R7
C51
C51
R207
R207
R21
R21
R77
R77
R173
R173
R171
R171
31
31
R244
R244
Expansion Memory
Expansion Memory
1
1
15
15
Main Memory
Main Memory
J42
J42
61
61
143
143
Backlight Connector
Backlight Connector
J27
J27
C380
C380
J25
J25
J24
J24
1
1
K
K
D3
D3
A
A
1
1
TH2
TH2
FUD2
FUD2
J8
J8
1
1

Preparing The TLS-450 Console For Upgrade Comm Module Upgrades
12
Comm Module Upgrades
1. Remove the module clamp securing screw and set aside clamp and screw (see Figure 10).
Figure 10. Removing Comm Module Clamp
2. Remove Comm boards from Comm Module Bay slots 4 and 5 (see Figure 1) and set aside.
3. Install the TLS-450PLUS Ethernet Interface module in slot 4 (see Figure 11).
Figure 11. Install Ethernet Module In Slot 4
LEGEND FOR NUMBERED BOXES IN Figure 9
1. Comm module clamp 2. Clamp securing screw
LEGEND FOR NUMBERED BOXES IN Figure 9
1. Blue (E3)
2. Yellow (E2)
3. Red (E1)
1
2
2
3
1

13
Preparing The TLS-450 Console For Upgrade Comm Module Upgrades
4. Install the TLS-450PLUS USB Module in slot 5 (see Figure 12).
Figure 12. Install USB/Wireless Module In Slot 5
5. Relocate other Comm module(s) in available slot(s). If CDIM module was in slot 4 relocate it to slot 1 or 2.
Replace Comm module clamp and securing screw (see Figure 13).
Figure 13. Replace Comm Module Clamp And Securing Screw
blue
blue
yellow
yellow
red
red

Preparing The TLS-450 Console For Upgrade Installing New TLS-450PLUS CPU Board
14
Installing New TLS-450PLUS CPU Board
1. With anti-static strap attached to wrist and to metal surface of TLS-450 console, remove the iButton from the
TLS-450 CPU board and install it in the empty socket on the new TLS-450PLUS CPU board (see Figure 14).
Make sure the flanged side of the iButton is facing up in its socket (see Figure 15).
Figure 14. Insert iButton In Socket On New TLS-450PLUS CPU Board
Figure 15. Install iButton Flange Facing Up
2. Install the new TLS-450PLUS CPU board into the console. Line up with slot in back of console wall and make
sure board is fully seated in its backplane connector and the front edge is over the standoff pins (item 1 in
Figure 8). Push board front edge onto snap pins to secure it in place.
3. Remove the battery isolator strip from under the battery hold-down clip (see Figure 16).
Figure 16. Remove TLS-450PLUS CPU Board Battery Isolator Strip
+
+

15
Preparing The TLS-450 Console For Upgrade Installing New TLS-450PLUS CPU Board
4. Reconnect the Ethernet Interface module’s three cables to the CPU board’s Ethernet connectors. Blue cable
(E 3) to top connector, yellow (E 2) to next down and red (E 1)to lower connector - see Figure 17).
Figure 17. Connect Ethernet Cables
5. Connect the Wireless cable to the CPU board (see Figure 18).
Figure 18. Connect Wireless Cable
6. Connect the two USB module USB cables (labeled 3 and 4) to the CPU board USB 3 and 4 connectors (see
Figure 19).
blue
blue
yellow
yellow
red
red

Preparing The TLS-450 Console For Upgrade Installing New TLS-450PLUS Display Door
16
Figure 19. Connect USB Module Cables
7. If there is an optional printer, connect its USB cable to the CPU board’s USB 1 (top) connector (see
Figure 20).
Figure 20. Connect Optional Printer USB Cable
Installing New TLS-450PLUS Display Door
1. Install the new TLS-450PLUS Display door on the console by attaching the door top and bottom hinges to the
console. Use the two hinge shoulder screws retained following removal of the TLS-450 Display door (see
Figure 21).
1
2
3
4

17
Preparing The TLS-450 Console For Upgrade Installing New TLS-450PLUS Display Door
Figure 21. Install The New TLS-450PLUS Display Door
2. Connect the Ground cable to the Display door (see Figure 22).
Figure 22. Connect The Ground Cable