Velodyne SubContractor Series SC-1250 User manual

What is the SC Series?
• A reference sub for every installation situation
– Cabinet, wall, floor, ceiling, free standing
• SPL-R performance
• Outboard amplifier
– Runs up to two subs
• Standard speaker wire connections

SC-1250 Amplifier
• 1250 watts RMS, 3000 watts peak
• 7-band Auto-EQ (mic included)
• DSP control
• Rack mount ears included
• Remote with presets, phase, etc.
MIC INPUT
LED – Volume,
Crossover,
Model Select
IR INPUT
CROSSOVER
CONTROL
VOLUME
CONTROL

SC-1250 Amplifier - continued
• Easy Hookup and Setup
RS-232
CONTROL
(CRESTRON
CERTIFIED)
MIC INPUT CONTROL
FOR UP
TO 2
SC SUBS
(PROTECTED)
12V
TRIGGER
IR REPEATER
RCA,
BALANCED,
SPEAKER
LEVEL INPUTS

SubContractor Subwoofers
• 4 models to choose from (HWD):
– SC-8: 10 3/4” x 10 ½” x 9 1/8”
– SC-10: 12 7/8” x 12 3/8” x 9 1/2”
– SC-12: 14 3/4” x 14 3/8” x 10 1/8”
– SC-15: 18 3/8” x 18” x 13 3/8”
• Connects with conventional speaker wire
• Down-firing or front-firing
• Fits easily into standard millwork
• Line drawings posted on
www.velodyne.com

SC-IF (In-Floor) / SC-IC (In-Ceiling)
• Dimensions (HWD):
– SC-IF / SC-IC: 25 3/4” x 14” x 9”
• Fits between joists
• Multiple applications
• Out performs the SPL-1200R
• 4 mounting brackets included
• Internal bracing

SC-IW In-Wall Subwoofer
DRIVER
(Fires up or down)
STANDARD GRILL
(17” x 13.8”)
DRIVER MODULE
(Thermally protected)
CABINET
MODULE
(Pre-Installed)
DESIGNER GRILL
(18” x 4.64”)
¼” Thick
aluminum
sandwich

SC-IW In-Wall Driver
• Vertically firing T-shaped driver
• Maximizes driver travel / output
• Minimizes wall vibration
• Propriety Patent Pending
Driver Design
• Unique “drive shaft” design
• Neodymium motor structure

Spec Enough Sub(s)!
Note: Calibrated for High-Output Bass Performance
`
0 1000 2000 3000 4000 5000 6000
Room Size in Cubic Feet
SC-8
SC-10
SC-IW
SC-12
SC-IF/IC
SC-15
Model
Velodyne SubContractor Series Subwoofers Room Sizing Chart
1 Subwoofer
2 Subwoofers
3 Subwoofers
4 Subwoofers