
B
Bl
lu
ue
et
to
oo
ot
th
h
S
St
te
er
re
eo
o
H
He
ea
ad
ds
se
et
t
B
BS
SH
HS
SB
BE
E
1
15
5
20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C.
Tel. No.:+886-2-2698-3608 Fax No.:+886-2-2698-3648
4/6
2. Turning the Headset On or Off
- To turn the Headset on
Press S1 and hold for 2 seconds, then the blue indicator of the Headset flashes. The
Headset is now turned on.
- To turn the Headset off
Press S1 and hold for 2 seconds when headset is on, then the Headset will turn off.
3. Pairing the Headset
You are required to pair the Headset with your Bluetooth mobile phone/audio
device/PC/PDA before using the Headset.
Step 1 : Turn OFF the headset. Hold and keep pressing S1 for 4 seconds until the
blue and the red indicators are flashing alternatively. The headset is now ready
for pairing.
Step 2 : Initiate pairing process on your Bluetooth mobile phone/Audio
Device/PC/PDA to pair with the Headset. After search, you can find the device
name “BSHSBE15”
Step 3 : When asked the Passkey by the mobile phone, enter 1234 and confirm it.
(Note: The 1234 is a Default pin-code pre-stored in the Headset.)
When pairing is successful, the red indicator will turn off and the blue indicator will
flash..
If pairing can not finish in a period of time (approx. 2 minutes), the Headset will return
to standby mode. You may need to repeat steps 1 to 3 until pairing succeeds.
4. Listening to Music
If the Bluetooth Device supported Bluetooth stereo audio (A2DP profile), you can listen
music by the headset. And adjust the Headset volume by press the Volume Up (S2)and
Volume Down (S3)button.
If the Bluetooth Device supported AVRCP profile also, you can control music playback
by headset button
Short press S1 for PLAY / PAUSE
Long press S2 for 2 seconds for FWD
Long press S3 for 2 seconds for REV
Short press S2+S3 for STOP