Venture Lighting EMG024 User manual

EMG024
High Output Emergency Pod
Specificaon:
Rated Voltage: 220‐240V ~50/60Hz
Rated Power: 5W
Power Factor: 0.4
Supply Current: 52mA
Baery: Ni‐Cd, 12V, 3000mAh
Charge me: 24Hrs
Lumens: 1000
Emergency Duraon: >180 minutes
Charge me: 24Hrs
Fuse: 1A/3.15A
Ta: 0C ‐ 40C
Notes:
Products to be installed only by a qualified electrician.
Baeries should be replaced when the rated operang duraon can no
longer be met.
StandaloneInstallaon
1. Remove the outer shell by releasing the plasc retaining clips where
indicated.
2. Plug baery into PCB header.
3. Mount LED pod onto hanger using supplied bracket.
4. Snap pod casing onto hanger. Excess cable is retained by
plasc clips on reverse of pod.
To Baery
To Light Pod
& Status Indicator
1. 2.
4.
3.
LED ‐ LED + Green + Red +
‐ +
Switched Live In Live In Neutral In Neutral Out Switch Live Out
Email:sales@venturelighng.co.uk Phone:+44(0)1923692600 Web:www.venturelighngeurope.com 
Test Buon Locaon

LuminaireInstallaon
1. Open shell referring to diagram overleaf.
2. Pass luminaire power cable through strain relief
gland and connect to top power terminal.
3. Connect baery to PCB header.
4. Snap pod casing onto hanger.
5. Light source can be mounted on compable Venture luminaire or
reflector with supplied brackets.
PowerIn
ToLuminaire
ReflectorMounng     LuminaireMounng
Self‐Test
During self –test the light source will illuminate and the red indi‐
cator LED will flash connuously. On compleon the pod returns
to normal operaon.
Schedule
Every month ‐ 10 minute self‐test.
Annually ‐ 3 hours self‐test.
LEDStatusIndicator
Green Normal operaon
Single red flash Baery failure or not connected
Double red flash Light source failure
Triple red flash 3Hr self test failed. Baery at end of life
DocumentRevision2 09/08/2019
Switched Live (Black)
Live (Brown)
Neutral (Blue)
(Green/Yellow)
Switched Live
Neutral
ManualTest
Aer installaon emergency func‐
on can be checked by pressing
the test buon for 3 seconds. The
light will illuminate for 5 minutes
before resuming normal operaon.
TimerReset
Monthly and annual mers can be
reset by pressing the test buon
for 1s.