Verizon Ellipsis Jetpack MHS900L User manual

---
Userguide.
verizon"
MHS900L
.~ :·~ ·elltp5 t S™
JETPACK

Components
5. Back rover n otch
4 cna rg er poll (M ICl"o USS)
8. Ba ttery contac t
3 Dtspla (1 28x40 pw!ls) 1.
Power / Menu Butt on
1. Power/Menu Button -Turn on/off the Jetpack. Shows the Jetpack menu and informati on
Operation Status Operations Actions
Turn
On
Turn Off
Display
Wake-Up
Info Display
Press and hold the Power button for 2 seconds.
Press and hold the Power button until "Goodbye"
messa e a ears.
When the display
is off (sleep mode), the first quick press
of the Power button wakes up the display.
When the display
is on , each time the Power button is
pressed quickly, the following information displays.
Data
Usage> Wi-Fi Name >Password>Web Admin URL
guide> Home
Charging Indicator Light
-
Colors Charging Status
Off
Red
Green
The Jetpack
is not connected to a charger.
The Jetpack
is connected to a charger and is currently
charging.
The Jetpack
is connected to a charger and the battery is
fully charged.
3

2. Power Indicator Colors Charging Status
Off The Jetpack is off.
J White/Blinking The Jetpack is on.
3. Display -Provides connection and battery status, network signal strength, roaming status,
and the number
of users connected with Wi-Fi.
4. Charger Port -The USB charger connects here.
5. Back Cover Notch -Lift the notch to open the back cover.
6. Factory Reset Button -Use one end of a small, unfolded paperclip to gently press and
hold the reset button
in the hole until the factory reset message displays.
7. SIM Card Stopper-Lift the stopper to insert or replace the SIM card.
8. Battery contact -Insert the battery with "UP" mark facing up to align battery contacts.
9. SIM Card Slot -The SIM card installation slot
4

Device Display
.,,,II tl Ji: 1
··,~" !: ... ~~ .. -E
Display Icon
ICON
II Network Signal Strength
mActi vity l'ndicator
Ill:Connected Devices
1:1 Roaming Indicator
Messages
ICI Battery Charge Indicator
Ill 'Charging
a SIM lndi .catgor
DESCRIPTION
Shows network siA_nal stren~h.
1111111111111
Appears when data is being transferr ed between the
mobile netowork
and your Jetpack.
II Downloading
II Uploading
m Downloading and Uploading
Shows the number of connected devices.When the Jetpack
can't
suppo,rt any more devices, MAX is shown.
1111111
Appears when your Jetpack is roaming.
Appears
when you have unr - ead text messages.
11111
Shows the batterv charae status.
. -
Ill Ill IIJ Iii a ICI
Appears when battery is charging.
Appears
when your Jetpack needs to notify SIM status.
a
II
II
This Icon appears when vour Jetpack SIM Is PIN locked.
This
Icon appears when there's an error with
your SIM card.
This icon appears when there's no SIM In serted
in your Jetpacl<.
5

Battery Management
Your Jetpack is equipped with a replaceable rechargeable battery. It will work from its charged
battery alone, or when the device is plugged into a power source.
Note: Please do not attempt to open or disassemble your Jetpack and the battery pack. Doing
so may cause damage that voids your warranty.
Charge the battery by plugging
in the charger provided together wi th your Jetpack. While the
battery is charging, the battery charging
iconm displays, and the power button illuminates red
-.When the battery
is charged, the battery icon is solidE:!J, the power button illuminates
green
IMPORTANT! Please use only an approved charger to charge your Jetpack. Improper handling
of the charging port, as well as the use of an incompatible charger, may cause damage to your
device and void the warranty.
6

Using Your Jetpack
Accessing the Network
Using Your Jetpack for
the First Time
Connecting
to Your Jetpack
Using Your Jetpack After Setup
is Complete
7

Power On
Press and hold the Power/Menu button for 2 seconds.
Power Off
Press and hold the Power/Menu button until "Goodbye" message displays.
NOTE: Your Jetpack is normally ready to use within one minute of powering on. However,
depending
on network signal strength, it is also normal for the device to take longer to connect
to the wireless network.
Connecting to Your Jetpack
Wi-Fi Name (SSID) and Password
Your default Wi-Fi Name (SSID) and Password can be found on your Jetpack display upon
initial power up.
You can also find your Wi-Fi Name
and Password any time you need. Just press the
power/menu
button( .. ) shortly when the display is on.
,,1 11 •• .. - ~·
·..·'e ri :ct- 4,. :::- L -E
C>/ci8 er- d~. J1_ r- e -8
-=i 4.'.:'. /u.8C;B
',·'· ii-Fir lc:n-, e:
Ell1v1, J8t f::SC1 , :f , '.' /
Fe ~.~ · /~ · ~:: rci:
,l .t ~ t : : t'
2, et tit- ~' ~. t~ It- ','J
1- ttr:·:1 /n -, ·, .jet pc d -
.,111 ti · ·. ~·
'·i eri:,:::r- 4(:, L-E
Press quickly
Press quickly
Press quickly
Press quickly
Press quickly
Connecting to the Internet
Home screen
Data Usage display
Wi-Fi Name display
Password display
Web Admin URL Guide display
Back
to Home screen
1 Open the Wi-Fi application or controls
on your laptop or Wi-Fi capable device that you want
to connect
to your Jetpack, and find your Jetpack's Wi-Fi name "Ellipsis Jetpack xxxx".
2 Click Connect and enter the Password when prompted.