Versatile Power RACK 1500 XR Series User manual

7.1 Front and Rear Details

8.1 Normal Operation

Notes:
1. Minimum voltage is guaranteed at greater than 1% of the rated output voltage.
2. Minimum current is guaranteed at greater than 1% of the rated output current.
3. Measured with 20 MHz bandwidth and excluding line frequency ripple (see application note AN024 for measurement details, these
measurements taken at full rated output voltage and full power.
4. Line frequency ripple measured with 20 MHz bandwidth (see application note AN024 for measurement details, these measurements
taken at full rated output voltage and full power.
5. Time for output voltage to recover within 0.5% of its rated output for a load change from 10 to 90% of its rated output current.
6. Voltage set point from 10% to 100% of rated output
7. Add this to the output response time to obtain the total programming time
8. Time to provide data back to the controller using LAN interface (does not include A/D conversion time)
9. 1500 watt output is only available with an AC input of 115VAC or greater with lower AC line output will be limited to 1200W.
10. Symbol indicates DC output

12
34
5
50, 100, 200, & 400 VOLT MODELS
30 VOLT MODEL
6 7 8 9 10
6 7 8910

12
11
7.1 Front and Rear Details