VEVOR 5/16-3/8LT02 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
RATCHET STYLE LOAD BINDER
USER'S MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:
5/16-3/8LT02
3/8~1/2LT02
5/16-3/8LT04
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
RATCHET STYLE LOAD
BINDER

- 2 -
SAFE INSTRUCTIONS
WARNING:
1.Read this material before using this product. Failure to do so can result in
serious injury.
2.The Ratchet Style Load Binder must be used flexibly,and it is strictly
prohibited to use it compulsorily when individual connections are inflexible.
CAUTION:
1. Carefully read instructions and procedures for safe operations.
INSPECTIONS:
1.Before each use
Each time the ratchet style load binder is used, a visual inspection
should be carried out to determine whether there are abnormal conditions,
such as cracking,bending,deformation,etc.
2.After each use
After each use,if the tightening of the ratchet style load binder is
abnormal, the manufacturer or the supplier’s authorized maintenance
personnel should be advised to check immediately.
Suggestions for Safe Use of The Ratchet Style Load Binder
According to the size of the binder, it should be used with the matching
chain.
When connecting the binder hook with the chain ,hang the chain at the
bottom of the hook.
Do not knot the chain when using the binder.
When using the binder,make sure that the binder is straight without
folding and twisting.
Due to the shipping(handing) or transportation, the binder may have
knots at the connection between the ring and the hook or the screw
rod may be tightened. Please smooth the them before use.
Make sure that the chain is straight without folding and twisting,If the
chain has knots, please smooth the chain before use. Do not use this

- 3 -
product directly when the chain is twisted.
The goods are bundled on hard or relatively hard objects. When
tightening the binder, please do not stretch your hand under the chain
or avoid other objects that may affect personal safety.
when using the binder, please confirm whether the goods can be fixed
with the chain and whether the hardness of the chain will damage your
goods.
SAVE THESE INSTRUCTIONS
PRODUCT INTRODUCTION
5/16-3/8LT02
5/16-3/8LT04
3/8~1/2LT02
Ratchet Binder size
5/16-3/8inch
5/16-3/8inch
3/8-1/2inch
Ratchet Binders
working Capacity
7100Lbs
7100Lbs
12000lbs
Handle size
Ф18×300mm
Ф18×300mm
Ф18×300mm
Chain Working
Capacity
4700lbs
4700lbs
7100lbs
Chain Size
5/16-3/8in×20FT
5/16-3/8in×20FT
3/8-1/2in×20FT
Package Content
5/16-3/8LT02
5/16-3/8LT04
3/8~1/2LT02
Ratchet Binder
×2
×4
×2
Handle
×2
×4
×2
Chain
×2
×4
×2
User's Manual
×1
×1
×1
Model
SPEC.
Model
PARTS

- 4 -
PRODUCT DIAGRAM
INSTALLATION INSTRUCTION
1. Use both ends of the
chain hooks to hold the
truck or cargo in place.

2.Loosen the screw rod
at both ends of the
binder to the red mark,
as shown in the picture.
3.Pull the chain tight
manually, then hook the
chain with the binder, as
shown in the picture.

- 5 -
4.Set the switch to
LOWER,insert the handle
into the handle hole, and
turn the handle clockwise
back and forth to tighten
the chain,and then
remove the handle,as
shown in the picture.
5.Follow the steps above
to complete other
binders and chains
operations.
Complete bundling of
goods,.

6. When the
transportation is complete,
first switch to upper,and
turn the handle
counterclockwise back
and forth to release the
chain,and then do all the
untying.
CLEANING,MAINTENANCE AND TROUBLESHOOTING
WARNING:
Procedures not specifically explained in this manual must be performed
only by a qualified technician.
To prevent serious injury from tool failure,do not use When it is damaged
1.Please check the overall condition of the binder before each use.
Is the screw loose flexible?
Is the main body deformed?
Does the opening of the hook widen?
Is the gear deformed?
Whether there are cracks in all parts.

- 6 -
2.Before each use, thoroughly test whether the binder works properly
before actual use. If the binder doesn’t work properly, please follow the
inspection instructions to see if the problem occurs.
3.To prevent serious injury,be carefully when troubleshooting the faulty
binder, solve all problems before use. If the solution provided in the
troubleshooting guide cannot be solved problem, please ask qualified
technicians to check the binder before use.
After the binder is repaired ,twist the puller back and forth to see if it can be
retracted freely.
Make sure that the binder is safe enough to continue to use it. Wish that
the binder can bring you convenience at work.

Technical Support and E-Warranty Certificate
www.vevor.com/support
Made In China