VEVOR HX-50B User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
HEAVY-DUTY CABLE CRIMPER
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
HX-50B LK-60A
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
HEAVY-DUTY CABLE CRIMPER
HX-50B
LK-60A

- 2 -
1. WARNING!
1. Before using this product, please disconnect the power supply first.
2. Inspect before every use; do not use if damaged.
3. Keep away from children.
4. Before using this product, please understand the crimping
specifications of cables and terminals.
5. When using this product, pay attention to keep the jaws clean.
6. Do not use this product for cables and terminals beyond its crimping
range.
7. When using this product, do not put your fingers or other objects into
the jaws to avoid injury.
2. Product description
This product is a high-quality heavy-duty cable crimper with adjustable
jaws. The pliers apply enough pressure to the wire and crimp terminal to
bond the two together. In addition, this product is also equipped with a pair
of wire cutters for cutting wires and cables. When using it, you need to pay
attention to safety warnings, wear personal protective equipment, and
follow the correct use method.
3. Product Info

- 3 -
4. Product structure
4.1 Cables crimping pliers are mainly below parts:
1. Crimping block: used to compress and fix the cable.
2. Spring: used to adjust the crimping block
3. Anti-skid handle: Used to operate the manual wire rope crimping pliers.
Crimping block
spring
Anti-skid handles
4.2 The cutting pliers are mainly composed of the following parts:
Cutting mouth: used to cut wire rope.
Handle: Used to operate the cutter.
5. User Guide
5.1 Before using this product, please prepare the following tools:
Personal protective equipment such as protective gloves and goggles.
Cables or terminals that require crimping.
Lubricant and a clean cloth.
5.2 The method of use is as follows:
1. Select the jaw size that needs to be crimped, and rotate the left and right
jaws to the corresponding position.
2. Put the cable or terminal to be crimped into the jaw and align it with the
gear of the jaw.
3. Firmly press the handle down until the jaws are fully closed.

- 4 -
4. Keep the handle in compression until the crimping is complete.
5. Release the handle and take out the crimped cable or terminal.
5.3 Jaw adjustment method:
The jaws of this cable crimper are adjustable. When in use, press down the
spring on the clamp head, rotate the left and right jaws to the jaws that
need to be crimped at the same time, and then release the spring to fix the
jaws.
6. Repair and maintenance:
1. This product has tightly fitted components. Do not dismantle the
components.
2. Avoid knocking the tool and keep it away from moisture.
3. After repeated use of this tool for some time, check the quantity of oil in
the reservoir inside the hand tool.
3. Use ##20 oil for refill. Refilled oils shall be cleared of dust and grit.
4. unload the fixed handle, pull out the rear oil plug from the oil reservoir
and add ##20 mechanical oil filtered through 200- filter screen until oil
overflows.
5. Loosen the oil valve, turn the movable handle slowly for several times
to release trapped air in the oil reservoir. Replace the oil plug and screw
down the fixes handle.

- 5 -
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW
2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
Made In China

Technical Support and E-Warranty Certificate
www.vevor.com/support