VEVOR MFS-140 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
GRINDER
USER MANUAL
MODEL: MFS-140
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MFS-140
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
GRINDER
MFS-140

- 2 -
Note: Before beginning assembly of product, make sure all parts are present. Compare
parts with package content list and hardware contents. Do not attempt to assemble the unit
if any parts are missing or damaged.
Contact customer service for replacement parts.
SAFETY INSTRUCTIONS
WARNING：Read all safety warnings, instructions, illustrations and specifications
provided with this Grinder. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
SAVE THIS INSTRUCTION!
Warning - To reduce the risk of injury, user must read instructions manual
carefully.
Alternating current
This symbol, placed before a safety comment, indicates a kind of
precaution, warning, or danger. Ignoring this warning may lead to an
accident. To reduce the risk of injury, fire, or electrocution, please always
follow the recommendation shown below.
Danger!
Risk of personal injury or environmental damage! Risk of electric shock!
Risk of personal injury by electric shock!
Warning- Be sure to wear ear protectors when using this product.
Warning- Be sure to wear eye protectors when using this product.
Warning- Be sure to wear gloves when using this product.

- 3 -
Protective earth
Disposal information:
This product is subject to the provision of European Directive 2012/19/EC.
The symbol showing a wheelie bin crossed through indicates that the
product requires separate refuse collection in the European Union. This
applies to the product and all accessories marked with this symbol.
Products marked as such may not be discarded with normal domestic
waste, but must be taken to a collection point for recycling electrical and
electronic devices
1.READ All OPERATING INSTRUCTIONS AND PRODUCT SAFETY LABELS! FAILURE
TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR PROPERTY
DAMAGE!
2.CHECK FOR DAMAGED PARTS: Before using the grinder, check whether all parts work
normally and perform the expected functions. Check for alignment, binding and installation
of moving parts. and any other conditions that may affect the operation. If any parts, the
Power Cord or the Grinder are damaged, call the Customer Service number shown in this
manual.
3.Always unplug power cord from outlet when not in use, before putting on or taking off
parts or accessories, and before cleaning. After unplugging the unit, turn power switch ON,
then OFF to ensure that all power has been discharged from the grinder.
4.This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
5.NEVER LEAVE GRINDER UNATTENDED WHILE IT IS RUNNING!
6.Wait until all moving parts have stopped and turn off power before removing any part
from the grinder.
7.DO NOT use outdoors, this product is intended for INDOOR USE ONLY.
8.DO NOT pull the power cord to disconnect.

- 4 -
9.DO NOT USE WITH EXTENSION CORD. Always plug directly into a grounded wall
receptacle.
10.This grinder uses a grounded, three prong plug (hot, neutral and ground), the grounding
plug is used for electrical appliances with metal shell to prevent electric shock. DO NOT
change or alter the plug in any way. NEVER break off a grounding prong from a
3--‐conductor plug. Doing so will invalidate the warranty and may cause electric shock.
11.Place the grinder on a firm and stable surface. Ensure that the grinder is not placed near
the edge of the worktop, where it can be easily pushed off or fall.
12.The Gear Housing and the Motor Cover may become HOT during operation. This is nor
mal. DO NOT TOUCH these parts while operating.
13.To reduce the risk of unintentional starting, check that the control is OFF before pluggin
g the cord into wall outlet. To disconnect, turn the controller to OFF, then remove plug from
wall outlet.
14.DO NOT operate your grinder under a wall cabinet. Always unplug the unit from the elec
trical outlet when storing
it. Not doing so could create a risk of fire, especially if the appliance touches the walls of th
e garage or the door touches the unit as it closes.
15.NEVER plug the grinder in where water may flood the area.
16.To protect against risk of electrical shock, DO NOT submerge the grinder in water or oth
er liquids. Be sure the grinder is disconnected from the power source before cleaning. NEV
ER rinse the Grinder Motor under running water, only use a moist cloth to clean the Grinder
Motor Unit.
17.The use of attachments or parts not specifically recommended or sold by the manufactu
rer for this grinder will void the warranty and may cause fire, electric shock or injury.
18.The Manufacturer disclaims any responsibility in the case of improper use of Grinder. Im
proper use of the Grinder voids the warranty.
19.DO NOT REMOVE WARNING LABELS FROM THE GRINDER. Doing so will void the
product warranty and may result in serious personal injury.
20.This appliance must be grounded while in use to protect the operator from electrical
shock. This grinder uses a grounded, three prong plug that should be connected directly to
a grounded 120V(US)/230V(EC), three prong grounded wall outlet receptacle. Grounded
plugs are used on metal-encased electric appliances in order to provide protection from an
electric shock. DO NOT change or alter the plug in anyway. NEVER break off a grounding
prong from a 3-conductor plug. Doing so voids the warranty and may result in electric

- 5 -
shock.
21.Type X attachment: If the supply cord is damaged, it must be replaced by a special cord
or assembly available from the manufacturer or its service agent.
TECHNICAL PARAMETER
MODEL
RATINGS
Continuous working time
Capacity
MFS-140
110V/60Hz
1500W
1hour
≥45kg/hour
230V/50Hz
PRODUCT STRUCTURE
NO.
Name
Quantity
1
Adjusting handle
1

- 6 -
OPERATING INSTRUCTION
1. Install and fix the machine;
2. Turn on the power to run the machine;
2
Regulating screw
1
3
Plugging plug
1
4
Screw
1
5
Head cover
1
6
Hopper base
1
7
Hopper
1
8
Dust cover
1
9
Millstone base
1
10
Stationary grinding plate
Dry grinding plate*1
Wet grinding plate*1
11
Latch
2
12
Worm
1
13
Shim
1
14
Moving grinding plate
Dry grinding plate*1
Wet grinding plate*1
15
Hood
1
16
Motor
1
17
Support frame(R)
1
18
Support rod
1
19
Support frame(L)
1
20
Fastening handle
1

- 7 -
3. Containers placed at the outlet;
4. Place the ingredients to be processed in the funnel;
5. Turn the adjusting handle to adjust the thickness of the ground ingredients.
ENVIRONMENTAL PROTECTION
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed
through indicates that the product requires separate refuse
collection in the European Union. This applies to the product
and all accessories marked with this symbol. Products marked
with this symbol cannot be discarded with normal household
waste but must be taken to an electrical and electronic
equipment collection point for recycling.
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
REP
UK
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON
OXFORDSHIRE ENGLAND OX14 5DH
REP
EC
EUREP GmbH
Unterlettenweg 1a, 85051
Ingolstadt, Germany

- 8 -
Mahufacturer: Anhui Xuzhong Intelligent Technology Co., Ltd.
Address: No.23,Lantian Road,Economic Decelopment Zone,Wangjiang County,Anqing
City,Anhui Provice,China
MADE IN CHINA

TechnicalSupport and E-Warranty Certificate
https://www.vevor.com/support