VEVOR LFU4 User manual

Tech
www
nical Support and E-Warranty Certificate
.vevor.com/support
Technical Support and E-Warranty Certificate www.vevor.com/support
TOWING LOCKS & HITCH PINS
USER MANUAL
MODEL:LFU4
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 4 -
3.EASY TO INSTALL
1.Open the protective rubber cap and place the pin in the lock head, then
separating the lock head from the pin.
2.Press the button on the lock head to securely lock the pin.
3.Align and put the clip in place. Push the clip through the pin hole to add
additional safety.
4.A separate spring clip and 2 holes provide additional security if you use it
with the lock. 2 clip holes in 2" and 2.5" for different size receivers.
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
Made In China

- 1 -
MODEL:LFU4
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
TOWING LOCKS &
HITCH PINS
- 2 -
WARNING:
Read this material before using this product. Failure to do so can result in
serious injury.
Assembly precautions
1.Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during
assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
6.Product capabilities apply to properly and completely assembled product
only.
Use precautions
1. This product is not a toy. Do not allow children to play with or near this
item.
2. Use as intended only.
3. Inspect before every use; do not use if parts are loose or damaged.
SAVE THESE INSTRUCTIONS
1.TECHNICAL DETAILS
- 3 -
Model LFU4
Pin Diameter 5/8" and 1/4"
Pin length 92mm and 64mm
Package included 5/8" and 1/4" Towing Hitch Lock Pin;2 × Lock Head;
4 × Keys; 1× Spring Clip; 4× Rubber O-rings
2.FEATURES
1.Push lock and 1/4-turn lock
activation design, easy to lock.
2.Watertight dust cap
The rubber cap protects the internal
locking mechanism against rain water,
dirt, road salt and other corrosive
elements.
3.One set with two keys
This allows you to carry one and store
the other in a safe location or give a
friend equal access to your trailer hitch
setup.
4.Two hole for spring clip
A separate spring clip (cotter pin)
provides additional safety, can use the
locking pin with or without the lock
mechanism.