VEVOR GT0707 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
PRESSURE WASHER HOSE REEL CART
MODEL:GT0707
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:GT0707
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
PRESSURE WASHER HOSE
REEL CART
PRESSURE WASHER HOSE

- 2 -
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
This symbol, placed before a safety comment, indicates a kind of
precaution, warning, or danger. Ignoring this warning may lead to an
accident. To reduce the risk of injury, fire, or electrocution, please
always follow the recommendation shown below.
Rules for Safe Operation
WARNING:
The following safety precautions are suggested. This Hose Reel Cart is
designed, engineered and tested to offer reasonably safe and effective service,
provided that it is operated in strict accordance with these instructions.
Failure to do so may result in personal injury. Always observe the rules of
safe operation.Please read and retain this manual.
1. Be alert for holes in the terrain and other hazards.
2. Follow maintenance and lubrication instructions as outlined in this
manual.
3. Always wear substantial footwear.Do not wear loose fitting clothing that
may get caught in moving parts.
4. DO NOT SIT OR STAND ON THIS ITEM.
5. This product is not a toy nor. Do not allow children to play with or near
this item.
6. Use only on a flat, level, hard and smooth surface capable of safely
supporting a fully loaded Chest.
7. Use as intended only.
8. Inspect before every use; do not use if parts are loose or damaged.
ASSEMBLY PRECAUTIONS:
1.Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during

- 3 -
assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
6.Product capabilities apply to properly and completely assembled product
only.
7.Assemble on a flat, level, hard and smooth surface capable of safely
supporting a fully loaded Pressure Washer Hose Reel Cart.
SAVE THESE INSTRUCTIONS
Model
GT0707
Maximum Capacity (5/8”Flexible Pipe)
300ft
Number of Wheels
4
Colour
Silver Gray
Carton Contents
Ref.
Description
Picture
QTY.
1
Side Frame
2
2
Cross Brace
1
3
Axle
2
4
Wheels
4
5
Hose Reel Ends
2

- 4 -
6
Push Handle
1
7
Hose Reel Center
Hub
1
8
Water Coupling Tube
1
9
Crank Handle
1
10
Hose Extension
1
11
Wire Basket
1
12
Painted Water
Coupler U-Bracket
1
13
Crank U-Bracket
1
14
Crank Bracket
Bushing
1
15
Hose Washer
2
16
M6 x 35 Bolt
14
17
M6 x 25 Bolt
2
18
M6 x 15 Screws
13
19
Cotter Pin
4
20
12mm Large Washer
4
21
6mm Small Washer
16

- 5 -
22
M6 Nylock Nuts
16
23
Front Crank Frame
1
24
M6 Small Washer
13
Assembly Instructions
Tools Needed for Cart Assembly
(1) Screwdriver.
(1) M10 Wrench or Adjustable Wrench.
1. Install front crank frame to side frames using two M6 X 35 bolt sets.
Next add cross brace to side frame using four M6 x 35 Bolt Sets. Slide
axles through tabs on the bottom of side frames. See figure 1.
2. Install wheels using 12mm large washer and cotter pin.
See figure 2.

- 6 -
3. Attach hose reel end to the center hub using (6) M6 x 15 screws.
repeat opposite side. See figure 3A.
Find the end of the center hub with the extra threaded screw hole and
insert water coupler tube through this end first.
Attach water coupler tube to the center hub using the painted water
coupler U-Bracket. See figure 3B.
4. Insert crank bushing into crank U-Bracket and attach to the front crank

- 7 -
frame using (2) M6 x 35 Bolt Sets. Insert crank handle through the crank
bushing then slide hose reel onto crank handle securing with (2) M6 x 25
bolt sets. See figure 4.
5.Attach opposite end of the hose reel to the cross brace using (2) M6 x 35
bolt sets.See figure 5.

- 8 -
6. Assemble push handle onto cart frame using (2) M6x35 bolt sets. See
figure 6.
W
7. Attach basket to handle using (2) M6x35 bolt sets. See figure 7.

- 9 -
8. Insert rubber washers into hose extension and water coupler.
See figure 8.
9. Attach hose extension to water coupler. See figure 9.

- 10 -
Connect the water pipe
Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi
Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
Made In China

Technical Support and E-Warranty Certificate
www.vevor.com/support