VEVOR RYTC0073 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
PANEL CARTS
USER MANUAL
MODEL:RYTC0073
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:RYTC0073
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
PANEL CARTS

- 2 -
SAFETY INSTRUCTION AND PRECAUTIONS
WARNING:
Read this material before using this product. Failure to do so can result in
serious injury.
Assembly precautions
1.Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during
assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
6.Weight capacity and other product capabilities apply to properly and
completely assembled product only.
7.Assemble on a flat, level, hard and smooth surface capable of safely
supporting a fully loaded panel cart.
Use precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this
item.
3. Do not exceed weight capacities, evenly distributed from bottom up. Be
aware of dynamic loading! Sudden load movement may briefly create
excess load causing product failure.
4. Use only on a flat, level, hard and smooth surface capable of safely
supporting a fully loaded panel cart.
5. Use as intended only. To prevent tipping, push/pull using supplied
handle only. Do not lift while loaded.
6. Inspect before every use; do not use if parts are loose or damaged.
SAVE THESE INSTRUCTIONS

- 3 -
TOOL REQUIRED FOR INSTALLATION
Pliers
Note:The tool not included
with this product.
PARTS LIST
1-Side Panel
2-Bearing Bar
3-Star Handle Screw
4-Caster
5-Shim
6-Splitpin
7-Pipe plug

- 4 -
ASSEMBLY
1.Install the tire on one side as shown in the following figure
2.Repeat the first step once on the other side.
3.Pipe plug installed at both ends of the load-bearing rod.

- 5 -
4.As shown in the figure, adjust the working width of the side plate as required and
tighten the screws.
5.Assembly completed.

- 6 -
Items
Description
1
Name
Panel carts
2
Model
RYTC0073
3
Parameter
Load(Max):600LBS , Wheel:8"
4
Package Size
455x250x200mm
5
G.W.
8.25KG
MADE IN CHINA

Technical Support and E-Warranty Certificate
www.vevor.com/support