VEVOR JY-BC User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
UTILITY CARTS
USER MANUAL
MODEL: JY-BC
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL: JY-BC
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
UTILITY CARTS

- 2 -
SAFETY INSTRUCTION AND PRECAUTIONS
WARNING:
Read this material before using this product. Failure to do so can result in
serious injury. SAVE THIS MANUAL
Assembly precautions
1.Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during
assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
6.Weight capacity and other product capabilities apply to properly and
completely assembled product only.
7.Assemble on a flat, level, hard and smooth surface capable of safely
supporting a fully loaded service cart.
Use precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT SIT, STAND OR cLIMB ON THIS ITEM.
2. This product is not a toy nor a toy chest. Do not allow children to play
with or near this item.
3. Do not exceed weight capacities, evenly distributed from bottom up. Be
aware of dynamic loading! Sudden load movement may briefly create
excess load causing product failure. Do not exceed capacity of bench or
shelf supporting Top Chest.
4. Use only on a flat, level, hard and smooth surface capable of safely
supporting a fully loaded Chest.
5. Do not lift while loaded.
6. To prevent tipping, push/pull using supplied handle only.

- 3 -
7. Use as intended only.
8. Inspect before every use; do not use if parts are loose or damaged.
TOOL REQUIRED FOR INSTALLATION
Phillips Screwdriver and Rubber mallet
Note: The phillips screwdriver and rubber maller tools not included with this
product
PARTS LIST

- 4 -
ASSEMBLY
Use the mallet to tap down the parts to ensure they are seated
properly before fastening them with screws.
1 .Turn upper platform upright (#2) and install handle (#1)
2.Turn upper platform assembly upside down, and install legs (two
left and two right, #4and#5）
3. install lower platform(#3) and castors(#6 #7）Tighten all screws
and hex nuts. (#8, #9, #10)