VEVOR WMCPSF02 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
WOOD STOVE
USER MANUAL
Model: WMCPSF02
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
Model: WMCPSF02
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WOOD STOVE
USER MANUAL

- 2 -
Safety & Warning
•Read and understand this entire manual before assembling, installing,
operating, or servicing this product. Failure to follow these warnings and
instructions can cause death, personal injury or damage to valuable
property.
•While assembling this product, keep work area clean and well lighted,
and keep spectators and children out of the work area.
•When using the stove, please be sure to check whether it is deformed or
damaged. Especially if there is a crack or breakage on the glass, never use
it.
•When the stove is used once, the color of the stainless steel grid will
change. This has nothing to do with badness. It is recommended to burn at
high temperature for 2 hours after the first use.
•When setting the stove, please set it in a flat place.
•When assembling the product, the hand clips and sharp parts may be
disassembled up and down. Please be sure to wear gloves for assembly.
•Please pay attention to the use of stoves in tents or extended spaces.
Please keep the air well ventilated.
•Carbon monoxide is a colorless and transparent gas that must be
discharged safely to avoid accumulation in a closed environment.
•It is best to place a carbon monoxide detector in the space of the stove.
Never let children and pets near the stove, it will be very hot.
•Try to install safety protection devices, and be careful not to let children
touch their hands.
•When using the stove, please put it on the fire-resistant floor to prevent
the tent floor from catching fire. Please add fuel carefully when opening the
fuel injection port.
•Every time you operate the parts of the high-temperature furnace, please
use heat-resistant gloves to avoid burns.
•Fuel, propane, fuel nozzle, paint, thinner and combustible materials
should be stored away from the stove and ventilation pipes. This kind of
combustible material is recommended to be 6 feet (about 180 cm) away

- 3 -
from the furnace.
•The furnace may be overturned under special circumstances such as
collision, earthquake and fuel input. Please pay attention to the stove
carefully to prevent it from tipping over!
•Don't touch the heater with your hands when using it, it will cause
serious burns.
•Please wait for the stove to cool sufficiently before storing it to prevent
burns. Please pay attention. Pots, vermicelli, pots and other objects heated
on the stove should be prevented from being stable and falling off! Don't
use the fuel tank to make a fire. Fuel such as fuel tank and ignition device
containing combustible gas may explode in the furnace, causing serious
injury, injury, death and fire.
•During the use of the furnace, it needs to be confirmed continuously.
Don't leave the burning furnace unattended for a long time.
•When storing the stove, carefully observe the surroundings to prevent
Mars from igniting the surrounding environment
•It's better to have a fire extinguisher of suitable size nearby. To decide
the size, please discuss it with the local fire department.
•Pay attention to the choice of fuel. Or paint-treated wood will discharge
harmful toxins when it burns. Please pay attention when there are no toxic
chemicals in the fuel. This product should be installed with chimney and
used. Please keep the fuel injection port closed except for injection.
•When installing the chimney, please pay attention to whether the
abnormal air flow at least 3m in the sky is suitable for the surrounding
environment. After use, please wipe off the flow, dust, food and other
leaves and store them after wiping off.
•In the manufacturing process, small scratches in the assembly process
have no style in the use of products, so they have nothing to do with
product quality.

- 4 -
Specifications
Figure of the Product
Model Series
WMCPSF02
Fire Box Size(mm)
320×205×160
Diameter of Exhaust Pipe (inch)
2.4
Length of Exhaust Pipe (ft)
6.8
Gross Weight (kg)
5.9
MEAS(mm)
375×265×225

- 5 -
Figure 1
Part
Description
Qty
1
Chimney exhaust pipe
7
2
Pipe Holder
7
3
Chimney connecting seat
1
4
Bottom plate
1
5
Folding leg
2
6
Side plate
2
7
Top plate
2
8
Screw
8
9
Chimney cap
1
10
Chimney connecting seat fixing screw
5
11
Grill
2
12
Carry bag
1

- 6 -
Instructions
A. Take out the furnace body.
Figure 2
B. Open the support legs.
Figure 3

- 7 -
C. Open the front and rear bezels.
Figure 4
D. Insert the side plates.
Figure 5

- 8 -
E. Install Chimney connecting seat screws and Cover the top plate 1&2. NOTE:
First install all screws (do not tighten), after all screws to be installed and then
tightened.
Figure 6
Figure 7
The pipe with
damper
Keep it on at the
time of ignition

- 9 -
F. Insert the adapter(the shortest pipe) and install the first chimney with air cond
itioner. Please make sure that the internal valve plate is open during ignition.If
the flame is out or there is heavy smoke spilling out, please check that the
internal valve plate is open.
G. Assemble the remaining chimneys.Fasten the pipe holder at the junction of
the two chimneys.
H. Install spark-proof chimney at the top.
I. In order to prevent the chimney from shaking, a drawstring can be tied to the
ring of the top chimney to fix it.
J. Install baking pans on both sides to the left and right sides of the stove.
K. The air conditioner at the wood injection port can adjust the firepower.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E
RANCHO CUCAMONGA, California, 91730 United States of America
REP
UK
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
REP
EC
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Made In China

Support and E-Warranty Certificate
https://www.vevor.com/support
Made In China