Veziris Body UP Technical manual
Veziris
HEAL
THCARE
Wheelchair personal lift
USER GUIDE & WARRANTY TERMS
Accessibility At Its Best
Dear Customer,
Thank you for your condence in purchasing our product.
You have just acquired a safe, economical, eco-friendly and multiple purpose solution aid
for your daily needs.
To use this aid optimally, we ask you and any other users to read the instructions carefully.
Veziris
HEALTHCARE
Contents
General warnings & safety notes / Warranty & product liability 4
Purpose 5
Product Overview 6
Delivery – Installation 7
Operation 8
Maintenance and Repair 9
Technical Details 10
Spare Parts 11
www.bodyupevolution.com
General Warnings and Safety Notes
Body Up Evolution has met the standards of the following bodies:
CE (European Conformity)
and is identied with their respective logos.
The Production is subject to continuous quality control.
Body Up Evolution can be loaded to max. weight 100 kg (BU1000 model)
and 140 kg (BU2000) model.
The manufacturer does not recommend that Body Up Evolution be used in the following situations:
- Lifting a person from the ground.
- Outdoor Activities.
- Use at the stairs.
CAUTION
Before each use of the Body Up evolution the lifting straps should be checked for damage to material.
Damaged straps must be replaced by your local dealer.
Do not step with force on the footrests (A)
Failure to follow recommendations and safety notes in this user guide will exclude
the manufacturer from any liability of arising damage to persons, property or animals.
Warranty and product liability
Body Up Evolution is guaranteed by Veziris HealthCare and becomes eective on the date of purchase:
1) Frame and wheels - 5 years
2) Gear - 1 year
3) Transfer (canvas) seat - 1 year
4) Straps-1 year (with proper usage, explained in this user’s manual)
5) Pads - 1 year (with proper/regular cleaning)
Only original equipment and accessories should be used. When neglect and/or repairs through non authorized
persons occur, any guarantee of the Body Up Evolution and its components are rendered invalid.
Product liability on the part of the manufacturer
(Veziris HealthCare - M&E Veziris OE, Iraklitou 119-121, Halandri, Athens) is excluded in these cases.
4
Α
!
www.bodyupevolution.com
5
Purpose
Body Up Evolution is a safe, economical, eco-friendly and multiple purpose solution aid
for use in home, hospital care, elderly homes, etc.
Respect
Body Up Evolution has been especially designed to provide dignied patient transport,
whilst simplifying caregiver requirements.
Its “green”!
The Body UP Evolution does not require any batteries or charging; it is eco-friendly!
No more barriers to one’s daily life
Access to the bathroom, shower or toilet is easier than ever.
The possibility of transfer of a patient to a suitable car, van, etc. will expand the world
that the patient can access.
Money saver
Body Up Evolution takes the place of:
a “power lifter”,
a commode/seat,
a bath/shower seat,
and provides:
car/van access,
a versatile home/facility wheelchair,
and much, much more.
“Patient-friendly” design
BU’s frame colour and shape“rests” the eye and makes its presence very discreet
when not in use.
Portable
When it is disconnected into two pieces for transport, the user can enjoy Body Up’s benets
elsewhere as well. True mobility for many patients who do not currently have that option is now possible.
Limited service required
Body Up does not breakdown; it won’t require new batteries or circuit boards.
A yearly maintenance check by an approved organization is recommended by the manufacturer - with a visual
check of all parts - especially the straps and the gear mechanism.
Of course, the customary cleaning and sanitizing of pads, seats, etc. will be necessary as required for each user.
www.bodyupevolution.com
Delivery / Installation
Each Body Up Evolution is delivered in a substantial box container.
After unpacking, the parts can be easily assembled as follows:
1,2. Connect the two frames of the Body Up Evolution (8)
3. Caution – Inner width is adjusted according to the body type of each user.
Do not exceed the limit that is marked on the frame, in any case!
Product Overview
1. Back Rest
2. Lifting Levers
3. Outer Width Adjustment
4. Stabilization Straps (optional)
5. Bath Seat (optional)
6. Transfer Seat
7. Lifting Straps
8. Inner Width Adjustment / Disconnection point
9. Lifting Mechanism
10. Foot rests
11. Water Proof Covers
12. Wheels
13. Comfort Seat (optional)
6www.bodyupevolution.com
4
5
13
12
11
8
10
9
1
2
7
6
3
1 2 3 !
14, 15. Adding the covers on the back rest.
Caution - 12, 13. The proper way to add the cover.
9, 10, 11. Adding the covers on the frame arms
4. Connect the back rest (1), to the left frame.
7
4
!
www.bodyupevolution.com
5, 6, 7, 8. Attach the lifting levers (2) to the lifting mechanisms (9)
5
8
6 7
9
12
14
10
13
15
11
Operation - Lifting
1. Gently move the lying patient and place the transfer seat (6) under the thighs at the
lower end of the buttocks.
*Optional: Use the stabilization straps (4) in order to secure the patient on rmly the transfer seat.
Available demo video: http://www.bodyupevolution.com/en/stabilization-straps-bu-03/
2. Holding the patient from the back, help him sit on the bed with the transfer seat (6)
attached to him, and with his back straightened in a vertical position.
*Make sure that the patient sits vertically on the bed and the four metal points of the seat
that you are using, are visible.
3. Open or completely remove the back rest (1) and roll the Body Up Evolution backwards so that the frame
goes under the bed while slightly lifting the patient’s legs and place them on the footrests (8).
4. Close and secure the back rest (1).
5. Join the transfer seat (6) with the lifting straps (7) hanging from the Body Up Evolution in
the same manner as you would secure car seatbelts.
6. Finally, turn the left and right lifting levers (2) to lift the patient from the bed.
Caution – Make sure that the lifting straps (7) are vertical to the seat during the lifting process (A)
– Do not lift the strap too high as you may brake the buckle (B)
– The“press” sign should always face on the exterior side of Body Up Evolution (C)
– The Bath Seat (5) accessory, has not been designed for a long-distance transport nor for someone
sitting for a long period of time on it.
It is limited in the use of lifting, transport and positioning the patient to:
a. Other wheelchair b. Toilet c. Stool (D)
Destination options, optional items and notes.
Α. Wheelchair.
3,4. Make sure to adjust the width of the outer frame (3) of the Body Up Evolution, up to a
point that can embrace the wheelchair BEFORE the lifting process.
A
3
A
B C
D
4
8
!
Β. Car.
Front seat of the vehicle is suggested.
Suggested optional item: The comfort
seat (13).
C. BATH & TOILET
Suggested optional item: The water-
proof bath seat (5)
FOR MORE: www.bodyupevolution.com
* In order to lower the patient anywhere,
follow the reverse process.
Maintenance and Repair
Before each use of the Body Up Evolution the lifting straps (7) should be checked for damage to material.
Damaged straps must be replaced by your local dealer.
Failure to follow recommendations and safety notes in this user guide will exclude the manufacturer from
any liability of arising damage to persons, property or animals.
Instruction for Strap attachment to rollers on frame arms
1. The strap has been folded on itself and sewn to create a loop for the cotter pin to pass through, to enable
xing to the drum on the arm of the Body UP Evolution.
2. This shows the split pin used to fasten the strap to the Body UP Evolution.
3. The drum into which the cotter pin and loop for the strap are secured. Note the two holes drilled on the frame
of the drum where the cotter pin will be mounted.
4. Insert the cotter pin into the hole on one side of the drum frame to mount the cotter pin. Then insert the cot-
ter pin into the loop in the strap so that it can be inserted in to the second hole in the drum frame. Note: Ensure
that the sewn edge of the loop is facing the drum.
5, 6.With the cotter pin fully inserted into the second hole in the drum frame and protruding past the hole, in-
sert a screwdriver to split the ends of the cotter pins. This will ensure that the cotter pin and the strap are secure
within the drum frame.
7. Further secure the cotter pin, by using common pliers
8. Pin has been threaded through the frame and strap loop and cotter pin end split
The strap end is securely mounted onto the drum frame and can now be wound onto the frame either by
clockwise or anti-clockwise revolution of the handle at the front.
Repeat this process for all four straps attached to the Body UP frame.
Make sure to wind both right and left Body UP handles in the same direction to wind the straps onto their
respective drums.
9
www.bodyupevolution.com
5 6 7 8
1
23 4
Technical Details
CAUTION
Specications subject to change.
10 www.bodyupevolution.com
cm O 7,5 L 84 L 38-50 L 59,5-73 L 97,5 L 13,5
BU-900 with smaller wheels | Max weight capacity 100kg
BU-1000 Max weight capacity 100kg
BU-2000 Heavy Duty | Max weight capacity 140kg
cm O 10 L 84 L 38-50 L 59,5-73 L 99 L 16
cm O 10 L 88 L 47-57 L 69-81 L 102 L 17
/
/
/
Spare Parts
Only original equipment and accessories should be used.
When neglect and/or repairs through non-authorized persons occurs, any guarantee of the Body Up Evolution
and its components is rendered invalid.
Product liability on the part of the manufacturer (Veziris HealthCare) is excluded in these cases.
For questions about spare parts or accessories please contact your local dealer or the
Veziris HealthCare service.
Phone: +30 210 6852381.
In environmental protection:
All packaging materials are recyclable.
The cardboard packaging is designed to be recycled as waste paper. Therefore, paper only is used
as a ller. All plastic packaging lms are of PE and can be low pollution burned or recycled.
11
www.bodyupevolution.com
Body up Evolution is manufactured in Greece and is exclusively distributed by M&E Veziris
Exclusive Distributor
www.bodyupevolution.com
Veziris
HEAL
THCARE
Table of contents
Other Veziris Lifting System manuals
