Vicon VC5050-DSP User manual

Installation & Operation Manual
XX120
MODEL VC5050-DSP DIGITAL
DAY/NIGHT COLOR CAMERA
Copyright ©2002 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: [phone] INFOFAX: 800-287-1207 WEB www.vicon-cctv.com
Vicon part number 8009-8120-00-00 Section 1 Rev 702
VC5050-DSP GB 2002, 8, 7

Depending on the conditions of use, installation and environment,
please be sure to make the appropriate settings and adjustments. If
you need help with installation and/or settings, please consult your
dealer.
CONTENTS
INFORMATION TO USER.................................................................... 2
SHIPPING INSTRUCTIONS................................................................... 3
PRECAUTIONS..................................................................................... 4
PARTS NAMES..................................................................................... 5
CONCERNING AUTO-IRIS LENSES...................................................... 7
FLANGE-BACK ADJUSTMENT............................................................. 8
MOUNTING THE LENS ........................................................................ 9
CONNECTIONS .................................................................................... 11
SETTINGS............................................................................................. 12
TROUBLESHOOTING........................................................................... 15
SPECIFICATIONS.................................................................................. 18
FEATURES
•The optical filter is switched automatically to color image or black
and white image according to the subject brightness.
•Built in interline transfer method 1/3" CCD, approx. 410,000
picture elements
•Low smear, anti blooming, low lag, no burning and no geometric
distortion using the CCD solid state image device.
•100% solid state components giving excellent immunity to shock
and vibration
•Not subject to interference from magnetic or electrostatic fields
•High sensitivity, minimum required illumination is 0.03 lux (F1.2)
B/W mode
•Horizontal resolution, more than 520 TV lines
•Power supply: 24 V AC operation
ACCESSORIES
•Lens iris plug (4 pin) 1 pc.
VC5050 DSP GB 2002, 8, 7
English 1

INFORMATION TO USER
Safety Guard
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING
THIS UNIT.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This installation should be made by a qualified service person and
should conform to all local codes.
For th custom rs in Canada
This Class B digital apparatus complies with Canadian ICES 003.
Pour la cli ntèl canadi nn
Cet appareil numerique de la Classe B est conforme a la norme
NMB 003 du Canada.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by Vicon may
void the user’s authority to operate this camera.
VC5050 DSP GB 2002, 8, 7
2 English

SHIPPING INSTRUCTIONS
Use the following procedure when returning a unit to the factory:
1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below.
Record the name of the Vicon employee who issued the R.A.
Vicon Industries Inc.
89 Arkay Drive
Hauppauge, NY 11788
Phone: 631 952 CCTV (2288); Toll Free: 1 800 645 9116; Fax: 631 951 CCTV (2288)
For service or returns from countries in Europe, contact:
Vicon Industries Ltd
Brunel Way
Fareham, PO15 5TX
United Kingdom
Phone: [phone]; Fax: [phone]
2. Attach a sheet of paper to the unit with the following information:
a. Name and address of the company returning the unit
b. Name of the Vicon employee who issued the R.A.
c. R. A. number
d. Brief description of the installation
e. Complete description of the problem and circumstances under which it occurs
f. Unit fs original date of purchase, if still under warranty
3. Pack the unit carefully. Use the original shipping carton or its equivalent for maximum protection.
4. Mark the R.A. number on the outside of the carton on the shipping label.
VC5050 DSP GB 2002, 8, 7
English 3

PRECAUTIONS
In cas of probl m
Do not use the camera if smoke or a strange odour comes from the
unit, or if it seems not to function correctly. Disconnect the power
cord immediately, and contact Vicon Technical Support, Vicon Service
or an authorized Vicon Service Center.
Do not op n or modify
Do not open the cabinet, as it may be dangerous and cause damage
to the unit. For internal settings and repairs, contact Vicon Technical
Support, Vicon Service or an authorized Vicon Service Center.
Do not put obj cts insid th unit
Make sure that no metal objects or flammable substance get inside
the camera. If used with a foreign object inside, it could cause a fire,
short circuits or damages.
If water or a liquid gets inside the camera, disconnect the power cord
immediately, and contact Vicon Technical Support, Vicon Service or an
authorized Vicon Service Center. Be careful to protect the camera
from rain, sea water, etc.
B car ful wh n handling th unit
To prevent damages, do not drop the camera or subject it to strong
shock or vibration.
Install away from l ctric or magn tic fi lds
If installed close to a TV, radio transmitter, magnet, electric motor,
transformer, audio speakers the magnetic field they generate will
distort the image.
Prot ct from humidity and dust
To prevent damages to the camera, do not install it where there is
greasy smoke or steam, where the dampness may get too high, or
where there is a lot of dust.
Prot ct from high t mp ratur s
Do not install close to stoves, or other heat generating devices, such
as spotlights, etc., or where it could be subject to direct sunlight, as
that could cause deformation, discoloration or other damages.
Be careful when installing close to the ceiling, in a kitchen or boiler
room, as the temperature may raise to high levels.
Install where the temperature range will stay between –10°C and
50°C. (no condensation)
Cl aning
•Dirt can be removed from the cabinet by wiping it with a soft
cloth. To remove stains, wipe with a soft cloth moistened with a
soft detergent solution and wrung dry, then wipe dry with dry soft
cloth.
•Do not use benzine, thinner or other chemical product on the
cabinet, as that may cause deformation and paint peeling. Before
using a chemical cloth, make sure to read all accompanying
instructions. Make sure that no plastic or rubber material comes in
contact with the cabinet for a long period of time, as that may
cause damage or paint peeling.
VC5050 DSP GB 2002, 8, 7
4 English

PARTS NAMES
1Pow r indicator (POWER)
Comes on when the power to the camera is on.
2Vid o output conn ctor (VIDEO OUT: BNC typ )
Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.
3Manual color/black and whit s tting t rminal (CONTROL)
•G (ground) terminal
•C (color) terminal
•B (black and white) terminal
4Lin phas adjustm nt volum (LINE PHASE)
When using two cameras or more, the image on the monitor may roll vertically when switching sources. This
rolling can be minimized by turning this volume.
524 V AC input t rminal (24 V AC, GND)
6Cam ra s tup s ction (und r th cov r)
If due to installation conditions or environment the settings may need to be modified for best results (see
"SETTINGS").
To acc ss th controls, loos n th cov r fixing scr w A, th n r mov th cov r.
7L ns iris output conn ctor (LENS)
1
4
5
2
GCB
3
6
7
A
VC5050 DSP GB 2002, 8, 7
English 5

PARTS NAMES
8Flang -back lock scr w
9L ns mount cap
The cap is installed to protect the lens mount section.
Remove the lens mount cap before installing a lens (sold separately).
FFlang -back adjustm nt l v r (S pag 8)
GCam ra installation brack t
The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the
longer screws and install the shorter screws on the opposite side to seal the openings.
1Short r scr ws: M3 x 4
2Long r scr ws: M3 x 6
3Cam ra mounting scr w hol : 1/4"-20 UNC
CAUTION:
Wh n installing th cam ra support, s l ct a location that can support th total w ight of th
cam ra and acc ssori s.
1232
1
G
9
8
F
VC5050 DSP GB 2002, 8, 7
6 English

CONCERNING AUTO-IRIS LENSES
DC typ auto-iris l ns
A lens without amplifier circuit that operates only on a DC power source. In general, this type of lens is
referred to as DC type coil lens or DC type non amplifier lens.
(Set the A.I. LENS switch to the DC position.)
VIDEO typ auto-iris l ns
A lens with amplifier circuit that operates on video signal and DC power source. In general, this type of lens is
referred to as EE amplifier type lens.
ALC and LEVEL volume level controls are available on the lens for iris adjustments.
(Set the A.I. LENS switch to the VIDEO position.)
If using a VIDEO typ auto-iris l ns
•Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume should be turned
all the way to Av (Average).
•Depending on the type of lens used, the lens may not perform properly. In such a case, adjust the LEVEL
volume on the lens casing to correct.
DC
VIDEO
A. I.
LENS
VC5050 DSP GB 2002, 8, 7
English 7

FLANGE-BACK ADJUSTMENT
If the pick up surface is not correctly positioned with relation to the lens focal point, the picture will be out of
focus (in particular when using auto iris power zoom lenses, sold separately). If that is the case, adjust the
flange back position as described below.
1Using a + screwdriver, loosen the flang -back lock scr w (M2:+).
2Set the zoom lens to the maximum telephoto position, set the focus using the focus ring on the lens.
3Set the zoom lens to the maximum wide angle position, set the focus using the flang -back adjustm nt
l v r.
4Repeat steps 2 and 3, until the image stays in focus when changing from a telephoto shot to a wide angle
shot.
When the setting is complete, tighten the flang -back lock scr w.
Not :
When flange back lock screw is completely tighten it will protrude slightly as shown in the illustration (Fig. 1).
Do not tighten the screw further.
Fig. 1
Flange-back lock screw
2
3
1, 4
VC5050 DSP GB 2002, 8, 7
8 English

MOUNTING THE LENS
Pl as us a DC typ auto-iris l ns (sold s parat ly).
Ch cking th l ns mount
Do not use a lens if length “L” is more than 5 mm. If not, that may damage the camera and prevent
proper installation.
1R mov th l ns mount cap from th cam ra.
2Install th auto-iris l ns.
CS mount typ l ns
Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.
C mount typ l ns
To allow for flange back adjustment, install the C-mount adaptor (option) on the lens mount, then
carefully align the lens mount with the camera opening and turn the lens slowly to install it.
3Conn ct th l ns plug to th l ns iris output conn ctor (LENS) on th sid of th cam ra.
When using lenses from other makers, the plug shape may not correspond to the terminal on the camera.
In such a case, remove the original plug and using a soldering iron, connect the supplied l ns iris plug
according to the diagram. (Refer to page 10.)
L
1
C mount type lens 2
CS mount type lens
2
3
VC5050 DSP GB 2002, 8, 7
English 9

MOUNTING THE LENS
R wiring th l ns cabl in th l ns iris plug
1Pr par th l ns cabl .
Cut the cable at the plug, then remove approx. 8 mm of the cable sheath and strip about 2 mm from each wire.
2Install th l ns iris plug.
Solder the cable to the pins following the correct pin layout (refer to the table and illustrations), then close
the plug cover.
Pin layout
DC typ l ns s VIDEO typ l ns s
1Brake coil (–) +12 V DC (50 mA max.)
2Brake coil (+) Not used
3Drive coil (+) Video output (1.0 Vp p, high impedance)
4Drive coil (–) Ground (for video signal and DC power)
1
2
43
1
43
1
22
VC5050 DSP GB 2002, 8, 7
10 English

CONNECTIONS
B sic connection for monitoring or recording
Th p riph ral d vic s (VCR, monitor, l ns, tc.) and cabl s ar sold s parat ly.
1Make the video signal connection between the camera and the monitor or time lapse VCR.
2Connect to 24 V AC UL listed class 2 power supply.
CAUTION:
•To prevent camera and/or power supply failure, pay close attention to polarity when making the
connections.
•To prevent fire hazard any UL listed wire rated VW 1, should be used for the 24 V AC cable input
terminal.
3Insert the plug of this power cord into a wall outlet.
The POWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast
controls.
Coaxial cabl typ and maximum l ngth
•Cable type RG 59U (3C 2V), 250 m maximum.
•Cable type RG 6U (5C 2V), 500 m maximum.
•Cable type RG 11U (7C 2V), 600 m maximum.
CAUTION:
•The RG 59U type cable should not be run through electrical conduits or through the air.
•Using CCTV/Video grade coaxial cable.
(Vid o signal conn ctions)
: VIDEO IN
: VIDEO OUT
(A)
1
2
VC5050 DSP GB 2002, 8, 7
English 11

SETTINGS
The illustration shows the factory default settings for the switches in the camera setup section.
The camera settings are described on the assumption that a DC type auto iris lens is being used. If you are using a VIDEO type auto iris lens, be
sure to read the Note which is given. Furthermore, refer to the sticker on the inside of the cover for details on DIP switch positions.
Control nam Position
1Color and Black/Whit l v l switch (C-BW) L
2El ctronic Iris (EI)/Auto iris (AI) s tting AI
3Ap rtur comp nsation s tting
(Sharp: SHRP/Normal: NOR)
SHRP
4Backlight comp nsation mod s tting
(MULT/OFF)
OFF
5Backlight comp nsation s tting (BLC)
(CENT/OFF)
OFF
6Whit balanc switch (WB) and color
(R or B) adjustm nt volum
ATW
7Ext rnal sync s tting (SYNC: LL/INT) INT
8Auto-iris l ns s tting (A.I. LENS), s pag 7 DC
9L ns iris l v l adjustm nt adjustabl
1
C-BW
L
H
65
ON
3421
DC
VIDEO
A. I.
LENS
VR301
9
VR302VR303
IRIS
SYNC
A
I
E
I
OFF ATW
NOR OFF
CENT M SHRP LL SC-P1
AP BLC WB
6
23 67 845
BLUE R
E
D
MULT
VC5050 DSP GB 2002, 8, 7
12 English

SETTINGS
Iris function s tting
This should normally be set to the down (AI) position.
Use a manual or fixed iris lens and set the lens aperture to the
shortest F stop. Set the switch 1 (IRIS) to the up (EI) position.
When using an auto iris lens (for indoor/outdoor use)
Set the switch 1 (IRIS) to the down (AI) position.
Not :
•The electronic iris is suitable for normal indoor use. When the
switch 1 (IRIS) is set to the up (EI) position, do not use an auto iris
lens.
•If used under fluorescent light, the image may flicker. In such a
case, change to incandescent lighting or set the switch 1 (IRIS) to
the down (AI) position and use an auto iris lens.
•When shooting bright subjects, pay attention to the light angle in
order to avoid or minimize the smear phenomenon effect.
•If conditions are outside the electronic iris operation range or
more than the maximum illumination, it will cause saturation of
the CCD. In that case, use a manual iris lens.
Ap rtur
If you would like to emphasize the contours of the object, set the
switch 2 (AP) to the up (SHRP) position.
1
2
VC5050 DSP GB 2002, 8, 7
English 13

SETTINGS
Backlight comp nsation s tting
This cam ra has two diff r nt backlight
comp nsation functions: Normally backlight
compensation switch 3 (MULT) and 4 (CENT)
are set to the down (OFF) position. Change
the backlight compensation switch settings
depending on the conditions.
•MULT mod : Use this position when applying backlight
compensation to the whole of the screen.
•CENT mod : Use this position when applying backlight
compensation to only the central portion of the
screen.
Not :
•If switches 3 and 4 are set to the up (ON) position at the same
time, the MULT setting will have priority.
•When MULT mode is set, scenes with no backlighting may appear
extremely dark and the object may appear over exposed. If this
happens, set to CENT mode.
If using a VIDEO typ auto-iris l ns
•The ALC volume on the lens should be turned all the way to Av
(Average).
•If the backlight compensation function does not compensate
properly for the conditions, set using the LEVEL volume on the
lens.
3 4
(MULTI mode: 64 sections)
(CENT mode)
VC5050 DSP GB 2002, 8, 7
14 English

SETTINGS
Whit balanc adjustm nt
Normally the switch 5 (WB) is set to the down (ATW: auto white
balance) position and the white balance is adjusted automatically. If a
manual white balance adjustment is necessary, follow the steps below.
Set the switch 5 (WB) to the up (M: manual) position, then adjust the
colour.
•Turn RED (VR302) to set the red ratio and/or BLUE (VR303) to set
the blue ratio.
Synchronization s ttings
The default setting is internal synchronization (INT). You can change
the power supply synchronization by moving switch 6 to the up (LL)
position. Refer to “Lin phas adjustm nt” for details.
Lin phas adjustm nt
When using a camera switcher to connect 2 cameras or more to one
monitor, there may be a vertical roll of the images when switched. In
such a case, set as described below.
1Set the switch 6 (SYNC) to the up (LL) position.
2Switch the display on the monitor from camera 1 to camera 2.
Adjust the LINE PHASE volume on camera 2 until the vertical roll
of the image stops.
If more than two cameras are used, please repeat this procedure
for all the cameras.
CAUTION:
If the vertical roll cannot be corrected by setting the LINE PHASE
volume on camera 2, try setting the LINE PHASE volume on camera
1. If it still cannot be corrected, please check that the polarity of the
power cords of all connected devices is correct.
5
VR302VR303
BLUE
R
E
D
6
VC5050 DSP GB 2002, 8, 7
English 15

SETTINGS
L ns iris adjustm nt
If using a DC type auto iris lens, you will need to set the LEVEL
(VR301) volume when shooting in the conditions described below.
L (count rclockwis ): To decrease the contrast
H (clockwis ): To increase the contrast
•If shooting simultaneously in a dark room and through a bright
window.
•If the subject background is extremely bright or dark.
•If the brightness of the picture on the monitor is not correct.
C •
••
• B/W (color/black and whit ) switch s tting
This switch lets you select the timing of the automatic switching of
the optical filter to color image or black and white image, according
to the subject brightness. The default setting is “L”. Set the switch
according to the brightness.
(Fig. 2)
H: for a brighter setting than L
L: Standard setting
Not s:
•After the power has been turned off, switching will restart from
color, when the power is restored.
•A sound may be heard when the color image or black and white
image is switched. Also, the image will be distorted as shown in
Fig. 2, this is normal and does not indicate a problem.
•When using infrared lighting, if there is a strong reflection on the
subject, the optical filter may switch from black and white to color
mode, Use only enough infrared lighting so that the mode is not
switched.
•The focus setting may be different in black and white mode and
color mode. Please check the focus setting in both modes.
VR301
LEVEL
C-BW
L
H
VC5050 DSP GB 2002, 8, 7
16 English

SETTINGS
Manual color/black and whit s tting
Connect each pin of the CONTROL terminal as indicated below, to
set the image to black and white or color as desired.
•Color imag s tting
Connect the C (color) and the G (ground) pins.
•Black and whit s tting
Connect the B (black and white) and the G (ground) pins.
CONTROL t rminal Imag
CB
OFF OFF Auto
OFF ON Black and whit
ON OFF color
ON ON Auto
ON : Close
OFF : Open
Not s:
•The maximum length of cable for CONTROL terminal is 600 m
(AWG 24).
•During optical filter switching, even if the manual switching
operation is done, you cannot determine if the image is black and
white or color. Manual switching will have to be done one more time.
TROUBLESHOOTING
Before taking the camera for repairs, please check below to make
sure that the camera is used correctly. If it still does not perform
correctly, contact Vicon. See Shipping Instructions on page 3.
No pictur on th monitor scr n
•Is the power turned on to all connected devices? Is the voltage correct?
•Are all the signal connecting cables correctly connected?
•Is the lighting sufficient?
•Has the lens cap been removed?
•Is the lens type (DC or VIDEO) correctly selected?
Depending on the type of lens, the A. I. LENS switch must be set
accordingly.
•Is the iris control correctly set?
A: When using a DC type lens, the LEVEL volume (inside the
camera casing) should be adjusted.
B: When using a VIDEO type lens, the LEVEL volume (on the
lens) should be adjusted.
Th pictur is not cl ar
•Is the monitor correctly adjusted?
•Is the flange back position correctly set?
•Is the lens focus correctly adjusted?
•Are the lens surfaces clean?
If there is dust or finger prints on the lens, the image quality will
deteriorate. To clean the lens use a soft cloth or a commercially
available lens cleaning set.
GCB
VC5050 DSP GB 2002, 8, 7
English 17

SPECIFICATIONS
Cam ra:
Scanning syst m : NTSC standard TV system (525 TV
lines, 30 frames/sec.)
Int rlac : PLL 2:1 interlace
Imag d vic : 1/3 inch solid state image device
CCD
Pictur l m nts : 811 (H) x 508 (V)
Eff ctiv pictur l m nts : 768 (H) x 494 (V)
Synchronizing syst m : Internal sync, Line lock manually
switchable
R solution : 520 TV lines horizontally, 350 TV
lines vertically
Vid o output l v l : 1.0 Vp p/75 ohms, composite
Vid o S/N ratio : More than 48 dB
Minimum r quir d
illumination
(incand sc nt lighting)
:Approx. 0.03 lux with a F 1.2 lens
(B/W mode),
Approx. 0.6 lux with a F 1.2 lens (color
mode)
Control t rminal : Manual color/black and white setting
Backlight comp nsation : Manual ON/OFF switching,
Multi zone light measuring system
(Active when using an auto iris lens)
Iris function : Manual ON/OFF switching
El ctronic iris rang : 0.6 lux to 35,000 lux (F 1.2, lens:
color mode)
1.0 lux to 50,000 lux (F 1.4, lens:
color mode)
Flang -back : 12.5 mm ± 0.5 mm
Whit balanc : ATW/Manual switching
L ns mount : CS mount
Environm ntal conditions : Temperature: –10° C ~ +50°C
Humidity: less than 90% (no
condensation)
Pow r supply : 24 V AC, 60 Hz
Pow r consumption : 3.8 W (with auto iris lens)
2.9 W (without auto iris lens)
W ight : Approx. 450 g (without lens)
VC5050 DSP GB 2002, 8, 7
18 English

SPECIFICATIONS
Dim nsions: mm
F atur s and sp cifications ar subj ct to chang without prior
notic or obligations.
SERVICE
This camera is a precision instruments and if treated with care, will
provide years of satisfactory performance. However, in the event of a
problem, the owner is advised not to attempt to make repairs or open
the cabinet. Contact Vicon if you need service. See Shipping
Instructions on page 3.
136
126.5
1
15.4
25.2
11
1/4” – 20 UNC
67
54
28
3
VC5050 DSP GB 2002, 8, 7
English 19