Vicpas UniOP eTOP04C-0046 User manual

MANUUNIOP22- v.1.09 - 02.2012
UniOP
U n i v e r s a l O p e r a t o r P a n e l s
Ins t a l l a t i o n G u i d e

UniOP
TM
Universal Operator Panel
Installation Guide
Document code MANUUNIOP22
Version 1.0
Date 03.02.2012
The contents of this manual have been checked for correctness and conformance to
the described equipment, Nevertheless it is not possible to guarantee the absence of
possible discrepancies. The contents of the manual are checked on a regular basis and
any necessary corrections are introduced in successive versions.
Information in this document is subject to change without notice.
No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, without the prior written permission
of Exor International S.p.A
Windows is a registered trademark of Microsoft Corporation.
Copyright  2001-2012 Exor International S.p.A. All rights reserved.
Exor International S.p.A. - San Giovanni Lupatoto VR, Italy.

Installation Guide
i
Installation Guide
Contents
Introduction ..................................................................................................... 1
Product Identification .......................................................................... 2
Technical Specifications ................................................................................. 3
Installation ..................................................................................................... 12
Phisical Dimensions ........................................................................... 12
Connections ....................................................................................... 30
Power Supply and Grounding ............................................................ 3
PLC Port ............................................................................................ 40
PC/Printer Port ................................................................................... 41
AUX Port ........................................................................................... 43
Ethernet Port ...................................................................................... 45
Models without the PC/Printer Port ................................................... 45
External Keyboard Port ..................................................................... 45
Battery Replacement .......................................................................... 46
Removing the Legends ....................................................................... 47
Dedicated LED’s................................................................................ 48
Usage and Safety Guidelines ............................................................. 4
Installation Environment .................................................................... 4
Installation Procedures ....................................................................... 52
Handling the Memory Cards ......................................................................... 53
Getting Started .............................................................................................. 54
Command Summary ........................................................................... 55
Troubleshooting ................................................................................. 5
Touchscreen Calibration .................................................................... 5

UniOP
ii

Installation Guide
1
Introduction
This Installation Guide describes the main features of the UniOP operator panels. The
Guide refers to the following models:
BKDC-46 Operator interface with color display
BKDR-16 Operator interface with LCD display
CP01R-04 Operator interface with LCD display
CP02R-04 Operator interface with LCD display
CP10G-04
ePAD03
ePAD04
ePAD05
ePAD06
Operator interface with LCD display
Low-cost operator interface with LCD display
Low-cost operator interface with LCD display
Low-cost operator interface with LCD display
Low-cost operator interface with LCD display
ePAD33C Operator interface with TFT display
eTOP03
eTOP04C
Operator interface with LCD 3”8 display
Operator interface with TFT 4”3 display
eTOP05
eTOP05EB
eTOP06
eTOP06C
eTOP20C
Operator interface with TFT 5”7 display
Operator interface with TFT 5”7 display
Operator interface with TFT 5”7 display
Operator interface with TFT 5”7 display
Operator interface with TFT 7”5 display
eTOP33C Operator interface with TFT 10”4 display
eTOP40C Operator interface with TFT 12”1 display
eTOP50C Operator interface with XGA TFT 15” display
ETT-VGA Operator interface with touch and TFT color display
MD02R-04 Low-cost operator interface with LCD display
MKDG-06 Operator interface with LCD display
MKDR-04 Operator interface with LCD display
MKDR-05 Operator interface with LCD display
MKDR-16 Operator interface with LCD display

UniOP
2
The products have been designed for use in an industrial environment in compliance
with the 2004/108/EC EMC Directive.
The products have been designed in compliance with:
EN 61000-6-4 EN 55011 Class A
EN 61000-6-2 EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
The installation of these devices into the residential, commercial and light-industrial
environments is allowed only in the case that special in measures are taken in order to
ensure conformity to EN 61000-6-3.
The products are in compliance with the Restrictions on Certain Hazardous
Substances (RoHS) Directive 2002/ 5/EC
In compliance with the above regulations the products are CE marked.
Product Identification
The product may be identified through a plate attached to the rear cover. You will
have to know the type of unit you are using for correct usage of the information
contained in the guide.
An example of this plate is shown in the figure below:
eTOP33C-0050 product model name
06/08 month/year of production
13435 35508 serial number
H/W V hardware version of the product
S/W V software version of the product

Installation Guide
3
Technical Specifications
Power supply voltage DC 18 - 30 V
Power consumption
(1)
Back-up battery
(1)
3 V 270mA Lithium, not rechargeable,
life about 1 year, user replaceable,
model: CR2430.Change with same battery or
equivalent with the work temperature of UniOP.
(for eTOP04C 3V 50mAh Lithium, rechargeable,
not user-replaceable, model VL2330)
Fuse 2 A T user replaceable
(except the models CP10G-04, ePAD03/04/05/06,
MKDG-06, ePAD33C and
eTOP03/04/05/06/20/33/40/50 that are equipped
with an overcurrent protection device)
Environmental conditions
Operating temperature 0 ÷ +50°
C, with the exception of
the model indicated on note
(2)
EN 60068-2-14
Storage temperature -20 ÷ +70°C EN 60068-2-14
Operating and storage humidity 5 ÷ 85 % RH not-condensing EN 60068-2-30
Vibrations 5 ÷ Hz, 7mm peak
÷ 150 Hz, 1 G
EN 60068-2-6
Shock 50 G, 11 ms, 3 pulses per axis EN 60068-2-27
Protection class IP65 front panel
(3)
EN 6052
Keyboard reliability > 3 million operations
Touch screen tecnology Resistive
Touch screen reliability > 1 million operations
Electromagnetic Compatibility (EMC)
Emitted interference Class A EN 55011
Radiated, radio-frequency,
electromagnetic field immunity test
80 MHz ÷ 1 GHz, 10 V/m
1,4GHz ÷ 2 GHz, 3V/m
2GHz ÷ 2,7 GHz, 1V/m
EN 61000-4-3
Burst immunity test
Surge immunity test
±2 KV DC power supply
±1 KV signal lines
±0,5 KV DC power port (line to
earth)
±1 KV signal line (line to earth)
EN 61000-4-4
EN61000-4-5

UniOP
4
Electrostatic discharge immunity test
Immunity to conducted disturbances
inducted by radiofrequency field
Voltage dips, short interruptions and
voltage variations immunity test
8 KV (air electrostatic
discharge)
4KV (contact electrostatic
discharge)
0.15 ÷ 80 MHz, 12 V
Port : AC mains; Level :
100% duration : 1 cycle and 250
cycles (50Hz) ;
40% duration : 10 cycles (50Hz)
70% duration : 25 cycles (50Hz)
Phase : 0°-180°
EN 61000-4-2
EN61000-4-6
EN61000-4-11
PC/Printer Port
(1)
RS-232connector D-sub 15 pin female
300 - 38400 baud
PLC Port RS-232, RS-422, RS-485, C.L. 20 mA (active),
connector D-15 pin male
300 - 38400
(1)
baud
AUX Port connector D- pin female (functionality can be
configured with an optional communicatin
module)
User memory
(
1)
Recipe memory
(1)
16 KB / 32 KB RAM with back-up battery
Hardware clock
(1)
Clock/Calendar with back-up battery
Alarms
(1)
256/1024
Historical event list
(1)
last 256/1024 events with back-up battery
Programming software Designer version 6
Notes:
(1) feature depends on the panel models; see Table 1.
(2) for models with “B7” suffix range -20 ÷ +60°C
for eTOP and ePAD range 0 ÷ +45°C
(3) all the installation instructions listed in the chapter ‘Installation
Environment’ must be followed in detail.

Installation Guide
5
Model BKDC-46 BKDR-16 CP01R-04
Display 16x40 STN
color
16x40 LCD 4x20 LCD
Backlight CCFL CCFL LED
Graphics 320x240 320x240 -
Display dimensions mm) 121x91 121x91 -
Diagonal inches) 5.6” 5.6” -
User memory 32MB 512KB 512KB
User memory expansion - up to 1MB up to 1MB
Function keys 33 14 5
System keys 24 23 19
Touch screen - - -
User LED’s 24 11 5
System LED’s 5 4 1
PC/Printer Port ES ES ES
PLC Port ES ES ES
AUX Port
(1)
ES ES ES
DX Port video input) - - -
Ethernet Port - - -
USB Port - - -
Esternal keyboard Port - ES -
Programming speed 9600-38400 9600-38400 9600-38400
Battery ES ES ES
Recipe memory 32KB 32KB 16KB
Alarms 1024 1024 1024
Events list 1024 1024 256
Hardware clock ES ES ES
Buzzer - - -
Max current consumption on 24VDC mA) 600 500 250
Suffix 45: dimensions WxHxD mm)
(2)
275x220x80 216x168x82 138x186x82
Suffix 50: dimensions WxHxD mm)
(3)
- - -
Max panel thickness mm) 5 8 8
Weight Kg) 1.9 1.4 1.1
Table 1 - UniOP Technical Data

UniOP
6
CP02R-04 CP10G-04 ePAD03 ePAD04 ePAD05 ePAD06
4x20 LCD 4x20 LCD 4x20 LCD 4x20 LCD 4x20 LCD 4x20 LCD
LED LED LED LED LED LED
- 120x32 120x32 120x32 120x32 120x32
- 70x21 70x21 70x21 70x21 70x21
- 2.8” - - - -
512KB 512KB 512KB 512KB 512KB 512KB
up to 1MB up to 1MB - - - -
16 12 4 4 9 9
18 23 7 7 10 10
- - - - - -
16 13 5 5 10 10
1 4 4 4 4 4
ES ES - - - -
ES ES ES ES ES ES
ES ES ES ES ES ES
- - - - - -
- - - - - -
- - - - - -
- - - - - -
9600-38400 9600-38400 9600-38400 9600 9600-38400 9600
ES ES ES - ES -
16KB 16KB 16KB - 16KB -
1024 1024 1024 1024 1024 256
256 256 256 - 256 -
ES ES ES - ES -
- - - - - -
250 300 250 250 250 250
138x186x82 141x176x76 149x109x55 149x109x55 149x109x55 149x109x55
- 141x176x80 - - - -
8 5 5 5 5 5
1.1 1.1 1 1 1 1
Table 1 - UniOP Technical Data