Victor High Rise DC050 User manual

Need Help? Watch the video at www.victortech.com/High-Rise
High Rise™ Monitor Stand
With Built-In Shelf
Assembly Instructions for Model DC050
PRE-ASSEMBLY
•Please read all instructions before beginning assembly. We strongly recommend
you watch the video at www.victortech.com/High-Rise.
•Remove all parts and hardware from box and lay out on a scratch-free work surface,
as this will avoid damaging any parts during assembly. The shipping box provides
an ideal work surface.
•Do not dispose of any contents or packaging material until assembly is complete.
This will help to avoid accidentally discarding small parts or hardware.
•For your safety and ease, adult assembly by two people is recommended.
•Use the parts and hardware lists to identify and separate each of the pieces included
prior to starting assembly.
•Do not use power tools. Use only the included screwdriver.
Power tools can damage hardware and split wood.
Missing Parts or UPS Damaged Parts?
For your convenience you can E-mail us at
[e-mail]
If you require assistance during assembly, please call our
Customer Service Department
Monday –Friday 8 am to 4 pm CST 1-800-628-2420
Or watch our video at Victortech.com/High-Rise
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts
are missing, broken, or worn, stop use of the product until repairs are made using Victor authorized parts.

Need Help? Watch the video at www.victortech.com/High-Rise
Parts List
Hardware List
A：Dowel 11Pcs
B：Cam Lock 11Pcs
C：Screwdriver 1Pc
3
Missing Parts?
Call 1-800-628-2420 for
Victor customer service.
1
2
4
5
6
7
8
9

Need Help? Watch the video at www.victortech.com/High-Rise
This product uses a system of Dowels and Cam Locks to connect pieces together.
(1) The Dowel is inserted into one part with a screwdriver.
(2) The Cam Lock is inserted in a hole on the other part. (Note: The Cam Lock may come
already assembled into the wood). The Dowel on one part is inserted into an access hole
on the other part and protrudes into the Cam Lock.
(3) The Cam Lock is rotated one-half rotation clockwise to connect the parts.
(4) When complete, the adjoining pieces will be held tightly together.
TIP!
Use the screwdriver to rotate Cam Lock until the small arrow is facing towards the open
hole where the dowel will be inserted. A Dowel will be inserted into the hole and into the
open side of the Cam Lock.
Access Hole
Open Side
Dowel

Need Help? Watch the video at www.victortech.com/High-Rise
Step 1
Use Screwdriver to insert Dowels into small white threaded holes on Parts 2, 3, and 4.
Insertion should be easy. If strong force is required, back out the Dowel and start again.
Turn Dowel until all threads are no longer visible.
NOTE: In Steps 2, 3, and 4, you will be assembling the product upside down.
Step 2
Attach Part 4 to Part 5. The two Dowels on Part 4 go into the two side access holes on Part
5. Turn Cams on Part 5 one-half rotation clockwise to connect 4 and 5 together. Do not
over tighten.
Helpful Hint:
Make sure the cam locks are facing
up on Part 5 when attaching these
pieces!
2
3
4
A
4
5
5
4

Need Help? Watch the video at www.victortech.com/High-Rise
Step 3
Attach Parts 2 and 3 to Part 5. The two Dowels on Part 2 go into the side access holes on
Part 5. The two Dowels on Part 3 go into the other side access holes on Part 5.
Step 4
Turn Cam Locks on Part 5 one-half rotation clockwise to complete the connection. Do not
over tighten
5
2
3
4
3
2
5
4

Need Help? Watch the video at www.victortech.com/High-Rise
Step 5
Use Screwdriver to insert Dowels into small white threaded holes on Part 1.
Step 6
Flip the assembly right-side up. Attach Part 1 to Parts 2, 3, and 4. The Dowels from Part 1
go into the top access holes of Parts 2, 3, and 4.
Turn Cam Locks on Parts 2, 3, and 4 one-half rotation clockwise to complete the
connection. Do not over tighten.
3
2
1
1
4
5

Need Help? Watch the video at www.victortech.com/High-Rise
Step 7
Place the High Rise™ Monitor Stand on a desk. If taller height is desired, assemble
optional Height Extenders (Parts 6, 7, 8, and 9) to the bottom of each leg. This will add 1
inch of height to the work surface.
Victor Technology
www.victortech.com
Bolingbrook, IL USA
1-800-628-2420
* This unit has been designed to accommodate up to 50 lbs. We recommend not exceeding this limit.
6
7
8
9