Victorian Plumbing Keswick Bench User manual

V2.12.23
Keswick Bench Radiator
Fitting Instructions
Please follow them carefully and
leave this manual with end user

V2.12.23
Important Information
Child Safety Notices
Check & Inspect
Before installation, please read this guide carefully.
•A fully qualified and competent person should install this product.
•Observe all local plumbing and building codes.
•Shut o the main water supply.
•Operating temperature maximum 100°C. Please install a warning sign near
the product to avoid burning and scalding accidents.
•Select the desired location for the radiator ensuring the chosen wall is both
strong enough and suitable to carry the weight of the radiator when full of
water.
•The provided fixings are for masonry walls only, if installing on any other
surface please check that it will safely support the product and purchase
suitable fixings
•When cleaning, never use abrasive cleaners on this product as they will
damage the surface. Wipe the surface clean with a soft, damp cloth.
•Manufactured to BS EN 442-1 Radiators and convectors.
•The pipework must be flushed out to remove any debris which can aect the
function of this product.
•We update our product information and instructions regularly: for the latest
product information and instructions please look up your product by using
search bar on the website www.victorianplumbing.co.uk
Please note that you are 100% legally responsible for your own child’s safety
at home. Once installed, the radiator can become a hazard for children as this
radiator is not designed to support unreasonable extra weight, such as that of a
child and the radiator becomes hot during use. We must stress that you should
not allow children to climb/grab/play with the radiator or rails, as this can cause
accident or injury for the child from heat, falling, or the radiator being pulled o
the wall.
Here at Victorian Plumbing, we pride ourselves on selecting products from
reputable manufacturers who manufacture to our exacting standards and
quality control measures. All our products are well packaged and should reach
you in pristine condition. Please check this product carefully prior to install as
we must be notified of any shortages or damage within 30 days of delivery. For
further information please see terms and conditions.

V2.12.23
Tools required for installation (not supplied)
Please check you have all the items below:
Pencil
PTFE Tape
Tape Measure
Screwdriver
Power Drill
Rubber
Hammer
Spirit Level Gloves
Adjustable
Wrench
Plug x1
Rawl Plug x8
Air vent x1
Screw x8

V2.12.23
Step 1:
Allow enough room for the installation of valves or thermostatic controls
Before installation place a dust sheet on the
floor to prevent losing any small parts.
Position the radiator on your chosen floor. Using a pencil, mark
the bottom fixing brackets ready for drilling & securing. Drain
down the heating system in preparation to connect the radiator.

V2.12.23
Step 2:
Step 3:
Drill the floor using an appropriately sized drill bit and insert the
rawl plugs. Secure the bottom fixing brackets using the screws
provided.
Wrap the threaded valve tails with P.T.F.E tape and inset the
tails into the radiator tapping’s.

V2.12.23
Step 4:
Step 6:
Step 5:
Install both the flow and return pipework.
Switch on the central heating and bring the radiator up to full
heat and check all joints for leaks.
Screw the vent plug into the radiator and tighten using an
adjustable wrench. Refill the heating system and bleed the
radiator of any air using a screwdriver/vent key.

V2.12.23
After installation
Recycling and disposal
Troubleshooting
•Use a screwdriver/vent key to open the air vent, open the valve and let the
water rush into radiator.
•Check all connections for leaks.
•Once water overflows from the air vent, the radiator is fully purged of air.
•Use a screwdriver/vent key to close the air vent, turn on the valve and the
radiator is ready for use.
Please recycle the packaging in accordance with your local government
regulations on waste handling, and follow the same advice at the end of the
products life.
Product - Steel
Packaging - Cardboard, plastic, steel
When your radiator does not function, knowing the basic radiator
troubleshooting can save you from the stress and the hassles of a non-
functioning radiator. Here is a guide to solve the most common problems
associated with these electric home heaters.

V2.12.23
www.victorianplumbing.co.uk