VIDA TECH F7010 User manual

vidatechelevator.com
F7010 – Binary 7” LCD indicator
Installation manual
• Supply must be between 16VDC to 30VDC.
• VCI and Visual files must be placed on the root of a USB dongle, then connected to a powered indicator until the
USB light stops blinking.
• Must be installed in COP or hall fixtures.
• To get the actual configuration of the indicator, connect a void USB dongle, then the configuration will upload
into the dongle.
• You can modify the stair digit displayed by the indicator by modifying the .vci file with the Storm software,
available on our website.
• You can modify the visual configuration with the Storm software available on our website.
USB
Input for USB key
UP
ENTER
DOWN
Button to change the
configuration on board
Status Arrv
Up
Arrv
Dn
Strobe USB
USB light
Status LED
(Refer to the chart)
Brightness
FM
NoArr
FBLT
Portrait Inputs
Type
STRB
SPM BIN
Switch setting
(Refer to the chart)
S1
S2
CM
M1
M2
M3
M4
M5
M6
M7
Special Message
TRV DN
TRV UP
COM
TRV
STRB
COM
STRB
ARR DN
ARR UP
COM
ARR
CM
A
B
C
D
E
F
G/FM
www.vidatechelevator.com
Floor
COM
24V
Supply
*This screen manages special messages*

• To change the configuration of the indicator on board :
1. Press “ ENTER ” button to go to the main menu.
2. Then choose “ Edit stair digits ” and press “ ENTER ”.
3. Press “ UP/DOWN ” to select the floor to modify (1 to 127).
4.Press “ ENTER ” to confirm the floor to modify.
5. Press “ UP/DOWN ” to select the right character to display.
6. Press “ ENTER ” to confirm the new character.
7. Repeat the two previous step for the second and third character. Once completed, the indicator will return to
main menu.
SW
##Text Description
S1
FM
ON -> Blank the display in fire mode
NoArr ON -> Blank the arrow
FBLT ON -> 100% backlight intensity
OFF -> 80% backlight intensity (Backlight life enhanced)
Portrait ON -> Screen Portrait (If configuration supports this mode)
Binary 1 Wire/Floor Gray Code N/A
5
6Input
STRB
SPM
BIN
7
8
4
3
2
1
ON -> Strobe active Low
OFF -> Strobe active High
ON -> Binary
OFF -> 1 wire per message
• Status LED :
• Switch setting :
Status LED Description
System okSteady
Slow Blink System error