Viessmann Vitocal 200-S User manual

Natural Heat
VITOCAL 200-S

Heat pumps Vitocal 200-S
3 to 10 kW
Heating or cooling system with
interior and external unit
The Vitocal 200-S heat pump is available in
two options, a heating only unit or a heating/
cooling unit, both using natural heat from the
air. The split system comprises of an external
weatherproofed unit and an internal wall
mounted unit the size of a standard domestic
boiler, meaning internal space loss is kept to a
minimum. The external unit can be sited by the
side of the house or on a flat roof. The internal
unit contains the heat exchanger, heating
circuit pump and 3-way diverter valve, ensuring
a constant supply of heating and domestic hot
water. Electric flow heaters can be added as
an option where there is no existing boiler, to
ensure the cylinder achieves 60°C temperature
(standard on type AWS AC).
In the summer the Vitocal 200-S (Type AWS
AC) system with fan convectors or underfloor
heating can also be used to cool the building.
Vitocal 200-S
internal unit
1Expansion vessel
23-Way diverter valve
3Heating circuit pump
4Heat exchanger
5Vitotronic 200 controller
The Vitocal 200-S uses the free energy from surrounding air. It is suitable for new
buildings and renovations and can be used with existing gas or oil boilers.
Efficient and economical
The Vitocal 200-S is particularly efficient in
part load operation, using the advantages
of a DC inverter. The inverter matches the
compressor output exactly to the building
heat demand. When adding to an existing
system the Vitocal 200-S assumes primary
control and ensures efficient operation by
using the existing system to cover the peak
heat demand only. Modulating operation
reduces continuous starting and stopping,
which extends component life and the speed
controlled fan results in quieter operation.
Vitotronic control
While the Vitotronic 200 controller is designed
for ease of programming of the heat pump
unit, it also controls the whole heating system.
It has a clear and easy to read display with a
help menu to aid operation and includes a full
diagnosis and fault finding facility as standard.
The display will also show heating and cooling
curves which can be tailored to personal
preferences. The programming unit of the
Vitotronic 200 can be removed from the front
of this appliance and can be sited up to 5 m
away from the boiler, enabling installation in
areas with restricted access, e.g. if the boiler is
installed in a garage or loft.
Complete service and
commissioning from Viessmann
Both the external and internal units
benefit from a complete service and
commissioning facility via Viessmann‘s
Technical Service Department.
Vitocal 200-S external unit
1Evaporator
2Fan
3Compressor
1
2
3
4
5
2
1
3

Schematic representation of a heating system with Vitocal
200 -S in a new building (left) and a modernisation project.
Benefits at a glance
Attractively priced air/water heat pump with outputs from 3 to 10 kW
Modulating output for high efficiency in part load
Low operating costs due to high COP value (Up to 4.6 at A7/W35,
3.5 at A2/W35) according to EN14511
Maximum flow temperature up to 55°C at - 15°C outside temperature
Weatherproofed external unit with evaporator, compressor, expansion
valve and fan
Interior unit with heating circuit pump, heat exchanger, 3-way diverter
valve, safety equipment,and control unit; also with integrated flow
heater on heating/cooling variant
Vitotronic 200 controller for easy programming of the heat pump unit
Commissioning via Viessmann Technical Service
Vitocal 200-S external
and internal units
Vitocal 200-S
external and
internal units
DHW cylinder Buffer tankDHW
cylinder
Boiler
Vitocal 200-S heating system in a new building Vitocal 200-S and gas boiler for modernisation projects
(Plant example: AWS 104/107)
M
M
Radiator
Radiators

Viessmann Limited
Hortonwood 30, Telford
Shropshire, TF1 7YP
Tel: [phone]
Fax: [phone]
www.viessmann.co.uk
944 3644 GB 02 / 2 011
Copyright Viessmann
Duplication and alternative use only with prior written consent.
Subject to technical modifications.
Technical Data Vitocal 200-S
Your trade partner:
Vitocal 200-S Type AWS 104
AWS AC 104
AWS 107
AWS AC 107
AWS 110
AWS AC 110
AWS 113
AWS AC 113
Heating output data at 100% to
EN14511 (A2/W35°C, Delta T 5 K)
Rated output
COP in heating mode
Output control
kW
kW
3.0
3.30
1.1 - 3.8
5.6
3.24
1.3 - 7.7
7.7
3.50
4.4 - 9.9
10.6
3.26
5.0 - 11.9
Heating output data at 100% to
EN14511 (A7/W35°C, Delta T 5 K)
Rated output
COP in heating mode
Output control
kW
kW
4.5
4.64
1.2 - 5.3
8.0
4.26
1.8 - 9.5
10.9
4.62
5.0 - 14.0
14.6
4.29
5.0 - 16.1
Cooling capacity data at 100% to
EN14511 (A35/W7°C, Delta T 5 K)
Rated cooling capacity
Energy efficiency ratio ε(EER) in cooling mode
Output control
kW
kW
3.2
2.96
1.2 - 3.8
6.2
2.6
1.6 - 8.0
7.4
2.75
2.4 - 8.5
9.1
2.50
2.4 - 10.0
Cooling capacity data at 100% to
EN14511 (A35/W7°C, Delta T 5 K)
Rated cooling capacity
Energy efficiency ratio ε(EER) in cooling mode
Output control
kW 4.2
3.72
8.8
3.35
10.0
3.57
12.6
3.00
External unit dimensions
Overall depth
Overall width
Overall height
Internal unit dimensions
Overall depth
Overall width
Overall height
mm
mm
mm
mm
mm
mm
290
869
610
360
450
850
340
1 040
865
360
450
850
340
900
1 255
360
450
850
340
900
1 255
360
450
850
Overall weight
External unit
Internal unit
kg
kg
43
35
66
35
110
40
110
40