ViewSonic E70f+SB User manual

ViewSonic®
- User Guide
- Guide de l’utilisateur
- Guía del usuario
- Guia do usuário
ViewSonic®
E70f+/E70f+SB
CRT Monitor

ViewSonic E70f+/E70f+SB
Contents
Compliance Information ........................................................................ 1
Important Safety Instructions .................................................................. 2
Copyright Information ............................................................................. 3
Product Registration ............................................................................... 3
Getting Started
Package Contents .................................................................................. 4
Precautions ............................................................................................ 4
Quick Installation .................................................................................... 5
Using the Monitor
Setting the Timing Mode ........................................................................ 6
Adjusting the Screen Image ................................................................... 7
OSD Lock Settings ................................................................................. 8
Main Menu Controls ............................................................................... 9
Other Information
Specifications ......................................................................................... 11
Troubleshooting ..................................................................................... 12
Customer Support .................................................................................. 13
Cleaning the Monitor .............................................................................. 14
Limited Warranty .................................................................................... 15

ViewSonic E70f+/E70f+SB 1
Compliance Information
For U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the
cables which are included with the equipment or specified. Also, any unauthorized changes or
modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this device.
For Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numéique de la Classe B repecte toutes les exigences du Réglement sur le
matériel brouilleur du Canada.
CE Conformity for European Countries
CE Conformity
The device complies with the requirements of the EEC directive 89/336/EEC as
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard
to “Safety.”
User Information for all Countries
Notice: Use the cables which are included with the unit or specified.

ViewSonic E70f+/E70f+SB 2
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in
this guide for further instructions.
7. Do not block any ventilation openings. Install the equipment in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third prong are
provided for your safety. If the plug does not fit into your outlet, consult an electrician for
replacement of the outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the
point where if emerges from the equipment. Be sure that the power outlet is located near
the equipment so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the equipment. When a cart is used, use caution when moving the cart/
equipment combination to avoid injury from tipping over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualified service personnel. Service is required when the unit has
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if
the unit does not operate normally or has been dropped.

ViewSonic E70f+/E70f+SB 3
Copyright Information
Copyright © ViewSonic® Corporation, 2005. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of
Microsoft Corporation in the United States and other countries.
ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and
DDC are trademarks of VESA.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency
(EPA).
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The
ViewSonic® Wizard CD-ROM also provides an opportunity for you to print the registration
form, which you may mail or fax to ViewSonic®.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
E70f+/E70f+SB
ViewSonic 17” CRT Monitor
VS10795
E70f+/E70f+SB-4_UG_ENG Rev. 1A 05-12-05
______________________________________
______________________________________
Product disposal at end of product life
ViewSonic® is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life. For TCO’03 recycling information, please refer
to our website:
1. USA: www.viewsonic.com/pdf/recyclePlus.pdf
2. Europe: www.viewsoniceurope.com
3. Taiwan: recycle.epa.gov.tw.

ViewSonic E70f+/E70f+SB 4
Getting Started
Congratulations on your purchase of a ViewSonic® color monitor.
Important! Save the original box and all packing material for future shipping needs.
Note : The word “Windows” in this user guide refers to the following Microsoft operating
systems: Windows 95, Windows NT, Windows 98, Windows 2000, Windows ME
(Millennium), and Windows XP.
Package Contents
Your package includes:
• Color monitor
• DB-15 video cable
• Power cord
• ViewSonic® CD-ROM Wizard
• Quick Start Guide
Note: The CD includes the User Guide PDF files and INF/ICM display optimization files.
The INF file ensures compatibility with Windows operating systems, and the ICM file (Image
Color Matching) ensures accurate on-screen colors. ViewSonic® recommends that you install
both files.
Precautions
• For best viewing conditions sit at least
18” from the monitor.
• Avoid touching the screen with your
fingers. Oils from the skin are difficult
to remove.
• Never remove the rear cover. The
monitor contains high voltage parts. You
may suffer serious injury if you touch
these parts.
• Avoid exposing the monitor to direct
sunlight or another heat source,
including an open flame. The monitor
should be facing away from direct
sunlight to reduce glare.
• Always handle your monitor with care
when moving it.
• Place your monitor in a well ventilated
area. Do not place anything on the
monitor that prevents adequate
dissipation of heat.
• Ensure the area around the monitor is
clean and free of moisture.
• Keep the monitor away from magnets,
motors, transformers, speakers, and
televisions.
• Do not place heavy objects on the
monitor, video cable, or power cord.
• If smoke, on abnormal noise, or a
strange odor is present, immediately
switch the monitor off and call your
dealer or ViewSonic®. It is dangerous to
continue using the monitor.

ViewSonic E70f+/E70f+SB 5
Quick Installation
1. Connect power cord
Connect the power cord to a properly
grounded AC outlet.
2. Connect video cable
• Make sure both the monitor and
computer are turned OFF.
• Conne ct t he v ideo cable to t he
computer.
Macintosh® users: Models older than
G3 require a Macintosh adapter. Attach
the adapter to the computer and plug
the video cable into the adapter.
To order a ViewSonic® Macintosh
adapter, contact ViewSonic.
See “Customer Support” on page 13.
3. Turn ON monitor and computer
Turn ON the monitor, then turn ON
the computer. This sequence (monitor
before computer) is very important.
Note: At this point Windows users may
receive a message asking them to install
the INF file.
4. Install Display Optimization files
(INF and ICM files)
Insert the ViewSonic® Wizard CD-
ROM into your computer’s CD-ROM
drive.
Note: If your computer does not have a
CD-ROM drive, see “Customer Support”
on page 13.
Wait for the CD-ROM to auto-start.
Note: If the CD-ROM does not auto-
start:
double-click on the CD-ROM icon in
Windows Explorer, then double-click
on viewsonic.exe.
Follow the on-screen instructions.
5. Windows users: Set the Timing Mode
(resolution and refresh rate)
Example: 1024 x 768 @ 85Hz.
For instructions on changing the
resolution and refresh rate, see the
graphic card’s user guide.
Installation is complete. Enjoy your
new ViewSonic® color monitor.
To be best prepared for any future
customer service needs: print this user
guide and write the serial number in
“For Your Records” on page 3.(See
back of monitor.)
To register your product go online to
www.viewsonic.com.
The ViewSonic® Wizard CD-ROM also
provides an opportunity for you to print
the registration form which you may
mail or fax to ViewSonic®.
Video cable
Power cord
AC wall outlet

ViewSonic E70f+/E70f+SB 6
Using the Monitor
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen image and
minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and
refresh rate (or vertical frequency; example 85 Hz). After setting the timing mode, use the
OSD (On Screen Display) controls to adjust the screen image.
For the best picture quality set your monitor timing mode to:
VESA 1024 x 768 @ 85 Hz.
To set the Timing Mode:
1. Set the resolution: Right-click on the Windows desktop > Properties > Settings > set the
resolution.
2. Set the refresh rate: See your graphic card’s user guide for instructions.
Note: The refresh rate should already be set if you have done the CD installation (or refer to
your graphics card documentation).

ViewSonic E70f+/E70f+SB 7
Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the OSD controls. The OSD
controls are explained at the top of the next page and are defined in “Main Menu Controls” on
page 9.
MAIN MENU (1)
EXIT : SELECT :
CONTRAST/BRIGHTNESS
H. SIZE / POSITION
V. SIZE / POSITION
ZOOM
PINCUSHION
TRAPEZOID / PARALLELOGRAM
ROTATION
12
Main Menu
With OSD controls
Front Control Panel
shown below in detail
Scrolls through menu options and adjusts the
displayed control.
• Displays the control screen for the highlighted control.
• Also toggles between two controls on some screens.
Power LED
Green = ON
Orange = Power Saving
Power
On/Off
Displays the Main Menu or exits the control
screen and saves adjustments.
Switches between Normal, UltraBrite 3x and UltraBrite 5x modes:
“NORMAL: TEXT/SPREADSHEET”: displays a standard CRT brightness of 120
“ULTRABRITE 3x: GRAPHICS/GAME”: displays up to 300 nits of brightness for
applications and games.
“ULTRABRITE 5x: VIDEO/MOVIE/DVD”: When selected, this brightness level
setting nits for text and spreadsheet applications. When selected, this UltraBrite™ setting
optimum display performance of graphics displays up to 500 nits of brightness for When
selected, this UltraBrite™ setting optimized display performance of video applications.
“ULTRABRITE 5x: VIDEO/MOVIE/DVD”: displays up to 500 nits of brightness
for When selected, this UltraBrite™ setting optimized display performance of video
applications.

ViewSonic E70f+/E70f+SB 8
OSD Lock Settings
You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to
prevent unwanted changes to the current image settings.
• OSD Lock: Press and hold the [1] button on the face of the monitor for 10 seconds. The
message “OSD LOCK” will then display briefly, indicating that the OSD image settings
are now locked.
• OSD Unlock: Press and hold the [1] button again for 10 seconds. The message “OSD
UNLOCK” will then display briefly, indicating that the OSD image settings are now
unlocked.
Do the following to adjust the display settings:
1. To display the Main Menu, press button [1].
MAIN MENU (1)
EXIT : SELECT :
CONTRAST / BRIGHTNESS
ZOOM
H. POSITION / SIZE
V. POSITION / SIZE
PINCUSHION / PIN BALANCE
TRAPEZOID / PARALLEL
TILT
12
2. To select a setting to be adjusted, press the arrow buttons on the front control panel of
your monitor and scroll through the choices. When the desired control is highlighted,
press button [2].
Note: Some controls on the Main Menu are listed in pairs, such as Contrast/Brightness.
Display control screen (sample shown in step 3 below). Press button [2] to toggle to the
next control in the pair.
3. To adjust the setting, such as CONTRAST in the sample below, press the arrow buttons.
EXIT : 1 BRIGHTNESS : 2
CONTRAST
4. To save the adjustment and exit the menu press button [1] twice.