ViewSonic ViewBoard IFP50 Series User manual

Maaz Q. Page 1of 2Date 9/28/17
ViewSonic Corporation Rev. 3
Update PS175 for IFPxx50
Symptoms: Image flicker
This SOP is to outline the firmware update procedure to improve communication with various
graphic chipsets that currently fall outside the displays tolerance range, such as the “Intel HD530”
Only applies to units PRIOR to the serial numbers listed below
IFP6550 –V25173800001
IFP7550 –UZW173600001
IFP8650 –UZU17390001
Required equipment:
ViewSonic IFPxx50 series display
VPC10-WP Slot in PC (installed)
USB flash drive
Upgrade file “upgrade_510” (provided by ViewSonic)
Instructions:
1. Format your USB flash drive into FAT32.
2. Place folder named “upgrade_510” onto root directory of the USB drive.
Insert the USB drive into the USB2.0 port
3. Press POWER button to turn display on
4. When LED indicator turns BLUE, press and hold POWER button to prompt firmware update.
FW upgrade process will last approximately 5 minutes. During the update, the PC will make a
beeping sound. Once update completes, the display will restart and launch into Android.
Update Verification:
The display will automatically restart and launch to Android with Upgrade factory menu. Exit out
of this menu.
**Any changes made in the factory menu can result in failure or malfunction of the
ViewSonic Display. ViewSonic will not warranty unauthorized changes made within the
factory menu**

Maaz Q. Page 2of 2Date 9/28/17
ViewSonic Corporation Rev. 3
5. Press and hold the POWER button until a screen prompt asks to power down. Select OK
6. Switch “OFF” the AC power switch (next to plug), wait for 5 seconds then switch “ON”.
7. When powered on select input “PC”
8. Using remote control, press “INPUT 9 9 1” to bring up factory menu. Scroll to “Software
Information”and select, verify “PS175 Version is 0943”
Exit factory menu Firmware update PS175 is now complete.
Disclaimer: ViewSonic Corporation assumes no liability for any errors or omissions in the information displayed. This firmware update is intended
for select ViewSonic® Interactive Flat Panel Displays (“Product”). ViewSonic assumes no liability for data loss or any damages caused as a result of
any updates made on any device or damage to or failure of other equipment to which the Product is connected, whether incidental, consequential
or otherwise. You agree to take full responsibility for all files and data and to maintain all appropriate backup of files and data stored on any device
prior to performance of any update. Users shall be responsible for obtaining the necessary rights to access and use any third party content.
ViewSonic assumes no liability for the performance, availability and use of third party products and services. Corporate names and trademarks
mentioned herein are the property of their respective companies. Copyright© 2017 ViewSonic Corporation. All rights reserved.