ViewSonic PJD5132 User manual

Light, Bright, and Portable Projector
SVGA Projector
PJD5132
Take Control of Audience’s Focus
With the DynamicEco button on the remote, take command of
presentations by dimming the screen image up to 70%. The projector
will also auto activate DynamicEco when the unit is not in use.
When DynamicEco is
activated, the lamp's
power consumption is
significantly reduced –
a great energy-saving
design for low Total Cost
of Ownership (TCO).
Bright in Virtually Any Setting
Packed with 2800 lumens and a high contrast ratio of 15,000:1
(with DynamicEco), your presentations are guaranteed to be vibrant
even in the brightest ofce environments.
The ViewSonic®PJD5132 is a high-performance SVGA
800x600 DLP®projector with 2800 ANSI lumens and
15000:1 contrast ratio. With DynamicEco™technology,
presenters can put the projector in “standby” mode
by reducing brightness down to 30% when they
need to shift audience’s focus without restarting the
projector. This projector offers a variety of hardware
and software features including multiple PC and video
input options, 1.1x optical zoom, keystone correction,
PC 3D-ready/120Hz, support HD signal and integrated
speaker. Filter-less design and energy-saving Eco-mode
provide for easy maintenance and reliable product life.
The PJD5132 lightweight design is ideal for tabletop use
or ceiling mounting in both classrooms and corporate
ofces.
Maintenance Free
ViewSonic's PJD5132 projector features a lter-less design. Unlike LCD
projectors that require the user to clean, sometimes to replace, lters after
every 100 to 300 hours of operation, ViewSonic's PJD5132 projector is
lter-less, eliminating the need for lter cleaning or lter replacement. This
saves you signicant maintenance dollars and labor over the projector’s
lifespan, and lowers your total cost of ownership (TCO).
Reliable Picture Quality & Color Performance
ViewSonic DLP projectors provide reliable picture quality you can trust and
superior color performance you can count on after thousands of hours of
usage. Built on DLP technology, The ViewSonic PJD5132 projector virtually
eliminates image degradation known as color decay – yellow/faded tint that
LCD projectors may develop after extended use. Even after years of use,
the PJD5132 is still producing a stunning, sharp image that lasts.
With DynamicEco™ Without DynamicEco™

RS-232
Specications
Sales: [phone] or [email protected] • More product information: www.ViewSonic.com
*Lamp life may vary based on actual usage and other factors. **One year Express Exchange®service requires product registration. Programs, specications and availability are subject to change without notice. Selection, offers and
programs may vary by country; see your ViewSonic representative for complete details.Corporate names, trademarks stated herein are the property of their respective companies, DLP®and DLP logo are registered trademarks of Texas Instruments
and BrilliantColor™is a trademark of Texas Instruments. Copyright © 2012 ViewSonic Corporation. All rights reserved. [16422-00B-10/12] PJD5132
ViewSonic Corporation’s QMS & EMS
have been registered to ISO 9001 & ISO
14001, respectively, by TUV NORD.
DISPLAY Type 0.55" Digital Micromirror Device (DLP™)
Resolution SVGA 800x600 (native)
Lens 1.1x Manual optical zoom / manual optical focus
Keystone Vertical digital keystone correction (+/- 40º)
Size 24 – 300 in. / 0.6 – 7.6 m (diagonal)
Throw Distance 3.3 – 37.0 ft. / 1.0 – 11.3 m
Throw Ratio 1.86~2.04:1
Lamp 190 watt
Lamp Life (Normal / Eco-mode) 4500 / 6000* hours
Brightness 2800 Lumens
Contrast Ratio 15,000:1 (w/ DynamicEco™)
Aspect Ratio 4:3 (native)
Color Depth 30 bits, 1.07B Color (10+10+10)
Color Wheel 6-seg RGBCYW / 7200rpm
INPUT SIGNAL Computer and Video NTSC M (3.58 MHz), 4.43MHz, PAL (B, D, G, H, I, M, N, 60),
SECAM (B, D, G, K, K1, L), SD 480i and 576i, ED 480p and
576p, HD 720p, 1080i, 1080p
Frequency Fh: 31–100KHz, Fv: 48–120Hz
COMPATIBILITY PC VGA to 1600x1200 UXGA
Mac® Up to UXGA (may require MAC adaptor)
CONNECTOR RGB Input 15-pin mini D-sub (x2)
RGB Output 15-pin mini D-sub
Component Input 15-pin mini D-sub (x2, shared with RGB)
Composite Input RCA jack
S-Video 4-pin mini-DIN
Audio Input 3.5mm mini jack
Audio Output 3.5mm mini jack
Control RS-232 (DB-9)
USB Mini B (for mouse control and service)
AUDIO Speaker 2W
POWER Voltage 100~240VAC (Auto Switching), 50/60Hz (universal)
Consumption 250W (typ) / <1W (stand-by mode)
CONTROLS Basic Power, keystone/arrow keys, left/blank, menu/exit,
right/panel key lock, mode/enter, auto, source
OSD Display, Picture, Source, System Setup (Basic),
System Setup (Advanced), Information
(See user guide for full OSD functionality)
OPERATING Temperature 32ºF–104ºF (0ºC–40ºC)
CONDITIONS Humidity 10%–90% (non-condensing)
Altitude 0~6,000 ft (1,800m), operational up to 10,000 ft (3048m)
NOISE LEVEL Normal / Eco-mode 32dB / 29dB
DIMENSIONS Physical 10.6 x 3.3 x 8.7 in. / 268 x 84.4 x 221 mm
(W x H x D) Packaging 14.2 x 12.8 x 7.4 in. / 360 x 325 x 188 mm
WEIGHT Net 4.6 lb. / 2.1 kg
Gross 7.5 lb. / 3.4 kg
REGULATIONS CB, UL, cUL, FCC (including ICES-003), CE, UL-Argentina,
NOM, GS, GOST-R, SASO, Ukraine, PSB, C-Tick,
Korean-KC, CCC, CECP, WEEE, RoHS
WARRANTY 3-year limited warranty on parts and labor, 1-year limited
warranty on lamp, 1st year free Express Exchange®service**
SVGA Projector
PJD5132
PJD5132 projector, power cable, VGA cable, remote control with batteries, Quick Start Guide, ViewSonic
Wizard DVD (with User Guide).
What's in the box?
Optional Accessories
Replacement Lamp .....................................RLC-078
Wall Mount Kit ...........................................WMK-005
3D HD Video Processor .................................VP3D1
3D Active Shutter Glasses..........................PGD-250
Wireless Presentation Gateway .............WPG-series
Soft Case.............................................PJ-CASE-001
Extended 5-Year Warranty ................PRJ-EW-07-02
Audio In / Audio Out
AC Power
Monitor Out
S-Video/Video Inputs
Mini Type B USB
(Mouse Control &
Service)
BrilliantColor™ Technology
The ViewSonic PJD5132 projector with BrilliantColor technology features
multi-color processing to produce stunning, vibrant colors. Unlike other
technologies such as LCD which use just 3 primary colors to produce
the image, the PJD5132 uses up to 6 separate colors. The sophisticated
6-segment color wheel enhances the yellow color performance that is the
key to accurate and vivid color reproduction. With multi-color processing,
colors are richer and more vibrant with exquisite and precise detail.
Long Lamp Life up to 6000 Hours
The new advanced lamp technology extends the lamp
life up to 6000 hours* and saves on maintenance costs.
RGB/Component Video Inputs
Focus & Zoom Ring
Control Panel
IR Remote Sensor
Projection Lens
Quick Elevation Button
Kensington®Lock Slot
Projection Distance Screen Size (4:3)
Diagonal
Feet
3.6
9.8
14.8
18.7
24.6
30.8
37.1
Inches
30
80
120
150
200
250
300
Meters
1.1
3.0
4.5
5.7
7.5
9.4
11.3
Meters
0.8
2.0
3.0
3.8
5.1
6.4
7.6
PC 3D-Ready / 120Hz Refresh Rate Powered DLP®Link
Technology
With support for DLP®Link technology, you´ll have amazing 3D
capabilities at your disposal. All that’s required to unlock 3D capabilities
on ViewSonic PJD5132 3D-ready projector are ViewSonic PGD-250 3D
active shutter glasses, 3D content and 3D-enabled video card. Unleash
3D experience with the ViewSonic PJD5132 today.
Vent
Vent