ViewSonic VB-CAM-002 User manual

VB-CAM-002
User Guide
Model No. VS18519
P/N: VB-CAM-002
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic®Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual”

2
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding
the world’s expectations for technological evolution, innovation, and simplicity.
At ViewSonic®, we believe that our products have the potential to make a positive
impact in the world, and we are confident that the ViewSonic® product you have
chosen will serve you well.
Once again, thank you for choosing ViewSonic®!

3
Safety Precauons
Please read the following Safety Precautions before you start using the device.
• Keep this user guide in a safe place for later reference.
• Read all warnings and follow all instructions.
• To prevent damage, avoid any physical pressure, vibration, or immersion during
transportation, possession, or installation of the product.
• Always place the product on a flat, stable surface.
• Avoid contacting any liquids, gas, or corrosive materials with the shell of the
product.
• This product has no parts which can be repaired by the user. Any damage caused
by the user's own disassembly is not covered by warranty.
• Electromagnetic fields at specific frequencies may affect the image of machine.

44
Contents
Safety Precautions....................................................... 3
Introduction ................................................................ 5
Package Contents ...................................................................................................5
Product Overview...................................................................................................6
Initial Setup................................................................. 7
Installing the Camera..............................................................................................7
Display..................................................................................................................... 7
Tripod ...................................................................................................................... 7
Wall Mounting......................................................................................................... 7
Making Connections.................................................... 8
Connecting to Power and External Devices............................................................8
Appendix..................................................................... 9
Specifications..........................................................................................................9
Camera .................................................................................................................... 9
USB Features ........................................................................................................... 9
Input/Output Interface ........................................................................................... 9
General.................................................................................................................... 9
Troubleshooting ...................................................................................................10
Maintenance.........................................................................................................11
General Precautions.............................................................................................. 11
Cleaning the Camera Lens..................................................................................... 11
Cleaning the Case.................................................................................................. 11
Regulatory and Service Information .......................... 12
Compliance Information.......................................................................................12
FCC Compliance Statement................................................................................... 12
CE Conformity for European Countries ................................................................. 13
Declaration of RoHS2 Compliance......................................................................... 14
Indian Restriction of Hazardous Substances ......................................................... 15
Product Disposal at End of Product Life................................................................ 15
Copyright Information ..........................................................................................16
Customer Service .................................................................................................. 17
Limited Warranty .................................................................................................. 18
Mexico Limited Warranty...................................................................................... 21

5
Introducon
Package Contents
Compliance Statement
적합성 선언
Declaration de conformite
Hinweise
Declaración de conformidad
Dichiarazione di conformita
Declaração de compatibilidade
Vyhlásenie o zhode vydané
Federálnou komisiou pre
rádiové a televízne vysielanie
Izjava o skladnosti
Prohlášení o souladu se
Izjava o sukladnosti
VB-CAM-002
Quick Start Guide
Package Contents
1
Start to Use
2
Set Up
3
Compliance Statement
적합성 선언
Declarationde conformite
Hinweise
Declaraciónde conformidad
Dichiarazionedi conformita
Declaraçãode compatibilidade
Vyhlásenieo zhode vydané
Federálnoukomisiou pre
rádiovéa televízne vysielanie
Izjavao skladnosti
Prohlášenío souladu se
Izjavao sukladnosti
IFP9850-4
VS18697
ViewBoardseries
1.5V 1.5V
OK
Aspect
M8x25 mm x 4
4inches
(10cm)
4inches
(10cm)
4inches
(10cm)
11.875inches
(30.16cm)
ComplianceStatement
적합성 선언
Declarationdeconformite
Hinweise
Declaracióndeconformidad
Dichiarazionediconformita
Declaraçãodecompatibilidade
Vyhlásenieozhodevydané
Federálnoukomisioupre
rádiovéatelevíznevysielanie
Izjavaoskladnosti
Prohlášeníosouladuse
Izjavaosukladnosti
IFP9850-4VS18697
CommercialTouchDisplay
QuickStartGuide
1.5V 1.5V
OK
Aspect
IFP985VS1869CommeQuick
S
Packa
g
1
2
1
.
5V
1
.
5V
O
A
IFVCQ
P
1
2
1 1
O
A
M8x25mmx4
4inches
(10cm)
4inches
(10cm)4inches
(10cm)
11.875inches
(30.16cm)
ComplianceStatement
적합성 선언DeclarationdeconformiteHinweiseDeclaracióndeconformidadDichiarazionediconformita
Declaraçãodecompatibilidade
Vyhlásenieozhodevydané
Federálnoukomisioupre
rádiovéatelevíznevysielanie
Izjavaoskladnosti
Prohlášeníosouladuse
Izjavaosukladnosti
1. VB-CAM-002 3. USB Cable (Micro USB to Type-A)
2. Documentaon 4. Quick Start Guide

6
Product Overview
1
1
2
33
4
5
1. Privacy Cover 2. Lens 3. Microphone
4. USB 2.0 5. Mount

7
Inial Setup
Installing the Camera
Display
Tripod
Wall Mounng

8
Making Connecons
Connecng to Power and External Devices
1. Connect the USB cable to the USB port at the rear of the camera.
2. Connect the other end of the USB cable to your device.
1
2

99
Appendix
Specicaons
Camera
Item Specicaons
Sensor 1/2.8’’, CMOS, Eecve Pixel: 2.07M
Scanning Mode
Progressive
Lens Focus: f=2.8 mm, FOV: 90°
Minimal Illuminaon 0.5 Lux @ (F2.0, AGC ON)
Shuer 1/30s ~ 1/10000s
White Balance Auto, Indoor, Outdoor, One Push, Manual, VAR
Camera Bracket Bracket with damper
Digital Noise Reducon
2D, 3D digital noise reducon
Backlight Compression
Support
Digital Zoom
4x with designed applicaon
USB Features
Item Specicaons
Operang System Windows 7/8/10, Mac OS X, Linux, Android
Color/Compression MJPEG/YUY2/H.264
Video Format 1080P@30fps/25fps, 720P@30fps/25fps,
960x540P@30fps/25fps, 640x360P@30fps/25fps
USB Communicaon
Protocol UVC 1.1
UAC Support
EPTZ Support
Input/Output Interface
Item Specicaons
USB Interface 1 x USB 2.0 Type-A
General
Item Specicaons
Input Voltage 5V (USB power supply)
Current Consumpon 0.2A
Operang Temperature -10°C ~ 40°C
Storage Temperature -40°C ~ 60°C
Power Consumpon 1W
Size 103.9 mm x 26.8 mm x 29.9 mm (without bracket)

10
Troubleshoong
Problem or Issue Possible Soluons
No power • Make sure the USB cable is properly and securely
connected to the device.
The video image
displayed by the
camera is shaking
• Ensure the camera is securely installed and stable.
• Check for any nearby equipment that may be giving
o vibraons.

11
Maintenance
General Precauons
• Make sure the camera is turned o and the power cable is unplugged from the
power outlet if it will not be used for an extended period of me.
• Avoid lens should avoid bright objects (e.g., sunlight), and unstable light
condions.
• Do not use the camera around facilies that can transmit high-power radio
waves (e.g., television staon).
Cleaning the Camera Lens
• Wipe the camera lens with a clean, so, lint-free cloth. This removes dust and
other parcles.
Cleaning the Case
• Use a so, dry cloth to clean.
Disclaimer
• ViewSonic® does not recommend the use of any ammonia or alcohol-based
cleaners on the device or case. Some chemical cleaners have been reported to
damage the device and/or case.
• ViewSonic® will not be liable for damage resulng from use of any ammonia or
alcohol-based cleaners.

12
Regulatory and Service Informaon
Compliance Informaon
This secon addresses all connected requirements and statements regarding
regulaons. Conrmed corresponding applicaons shall refer to nameplate labels
and relevant markings on the unit.
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operaon is subject to the following
two condions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operaon. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against harmful
interference in a residenal installaon. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in accordance
with the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or television
recepon, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cauoned that changes or modicaons not expressly approved
by the party responsible for compliance could void your authority to operate the
equipment.

13
CE Conformity for European Countries
The device complies with the EMC Direcve 2014/30/EU, Low Voltage
Direcve 2014/35/EU.
The following informaon is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical
and Electronic Equipment Directive 2012/19/EU (WEEE). The mark
indicates the requirement NOT to dispose of the equipment as unsorted
municipal waste, but use the return and collection systems according to
local law.

14
Declaraon of RoHS2 Compliance
This product has been designed and manufactured in compliance with Direcve
2011/65/EU of the European Parliament and the Council on restricon of the use
of certain hazardous substances in electrical and electronic equipment (RoHS2
Direcve) and is deemed to comply with the maximum concentraon values issued
by the European Technical Adaptaon Commiee (TAC) as shown below:
Substance Proposed Maximum
Concentraon
Actual
Concentraon
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6⁺) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE) 0.1% < 0.1%
Bis(2-ethylhexyl) phthalate (DEHP) 0.1% < 0.1%
Butyl benzyl phthalate (BBP) 0.1% < 0.1%
Dibutyl phthalate (DBP) 0.1% < 0.1%
Diisobutyl phthalate (DIBP) 0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex
III of the RoHS2 Direcves as noted below:
• Mercury in cold cathode uorescent lamps and external electrode uorescent
lamps (CCFL and EEFL) for special purposes not exceeding (per lamp):
Short length (500 mm): maximum 3.5 mg per lamp.
Medium length (> 500 mm and 1,500 mm): maximum 5 mg per lamp.
Long length (> 1,500 mm): maximum 13 mg per lamp.
• Lead in glass of cathode ray tubes.
• Lead in glass of uorescent tubes not exceeding 0.2% by weight.
• Lead as an alloying element in aluminum containing up to 0.4% lead by weight.
• Copper alloy containing up to 4% lead by weight.
• Lead in high melng temperature type solders (i.e. lead-based alloys containing
85% by weight or more lead).
• Electrical and electronic components containing lead in a glass or ceramic other
than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or
ceramic matrix compound.

15
Indian Restricon of Hazardous Substances
Restricon on Hazardous Substances statement (India). This product complies
with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in
concentraons exceeding 0.1 weight % and 0.01 weight % for cadmium, except for
the exempons set in Schedule 2 of the Rule.
Product Disposal at End of Product Life
ViewSonic® respects the environment and is commied to working and living
green. Thank you for being part of Smarter, Greener Compung. Please visit the
ViewSonic® website to learn more.
USA & Canada:
http://www.viewsonic.com/company/green/recycle-program/
Europe:
http://www.viewsoniceurope.com/eu/support/call-desk/
Taiwan:
https://recycle.epa.gov.tw/

16
Copyright Informaon
Copyright© ViewSonic® Corporaon, 2021. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microso, Windows, and the Windows logo are registered trademarks of Microso
Corporaon in the United States and other countries.
ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are
registered trademarks of ViewSonic® Corporaon.
VESA is a registered trademark of the Video Electronics Standards Associaon.
DPMS, DisplayPort, and DDC are trademarks of VESA.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protecon
Agency (EPA).
As an ENERGY STAR® partner, ViewSonic® Corporaon has determined that this
product meets the ENERGY STAR® guidelines for energy eciency.
Disclaimer: ViewSonic® Corporaon shall not be liable for technical or editorial
errors or omissions contained herein; nor for incidental or consequenal damages
resulng from furnishing this material, or the performance or use of this product.
In the interest of connuing product improvement, ViewSonic® Corporaon
reserves the right to change product specicaons without noce. Informaon in
this document may change without noce.
No part of this document may be copied, reproduced, or transmied by any means,
for any purpose without prior wrien permission from ViewSonic® Corporaon.
VB-CAM-002_UG_ENG_1a_2021-05-10

17
Customer Service
For technical support or product service, see the table below or contact your
reseller.
NOTE: You will need the product’s serial number.
Country/ Region Website Country/ Region Website
Asia Pacic & Africa
Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/
中国 (China) www.viewsonic.com.cn 香港 (繁體中文) www.viewsonic.com/hk/
Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/
Indonesia www.viewsonic.com/id/ Israel www.viewsonic.com/il/
日本 (Japan) www.viewsonic.com/jp/ Korea www.viewsonic.com/kr/
Malaysia www.viewsonic.com/my/ Middle East www.viewsonic.com/me/
Myanmar www.viewsonic.com/mm/ Nepal www.viewsonic.com/np/
New Zealand www.viewsonic.com/nz/ Pakistan www.viewsonic.com/pk/
Philippines www.viewsonic.com/ph/ Singapore www.viewsonic.com/sg/
臺灣 (Taiwan) www.viewsonic.com/tw/ ประเทศไทย www.viewsonic.com/th/
Việt Nam www.viewsonic.com/vn/ South Africa & Maurius www.viewsonic.com/za/
Americas
United States www.viewsonic.com/us Canada www.viewsonic.com/us
Lan America www.viewsonic.com/la
Europe
Europe www.viewsonic.com/eu/ France www.viewsonic.com/fr/
Deutschland www.viewsonic.com/de/ Қазақстан www.viewsonic.com/kz/
Россия www.viewsonic.com/ru/ España www.viewsonic.com/es/
Türkiye www.viewsonic.com/tr/ Україна www.viewsonic.com/ua/
United Kingdom www.viewsonic.com/uk/

18
Limited Warranty
ViewSonic® Display
What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and
workmanship during the warranty period. If a product proves to be defecve
in material or workmanship during the warranty period, ViewSonic® will, at its
sole opon, and as your sole remedy, repair or replace the product with a similar
product. Replacement Product or parts may include remanufactured or refurbished
parts or components. The repair or replacement unit or parts or components will
be covered by the balance of the me remaining on the customer’s original limited
warranty and the warranty period will not be extended. ViewSonic® provides
no warranty for any third-party soware whether included with the product or
installed by the customer, installaon of any unauthorized hardware parts or
components (e.g. Projector Lamps). (Please refer to: “What the warranty excludes
and does not cover” secon).
How long the warranty is eecve:
ViewSonic® displays are warranted for between 1 and 3 years, depending on your
country of purchase, for all parts including the light source and for all labor from
the date of the rst consumer purchase.
Who the warranty protects:
This warranty is valid only for the rst consumer purchaser.
What the warranty excludes and does not cover:
• Any product on which the serial number has been defaced, modied, or
removed.
• Damage, deterioraon, or malfuncon resulng from:
 Accident, misuse, neglect, re, water, lightning, or other acts of nature,
unauthorized product modicaon, or failure to follow instrucons supplied
with the product.
 Repair or aempted repair by anyone not authorized by ViewSonic®
Damage to or loss of any programs, data, or removable storage media.
Normal wear and tear.
 Removal or installaon of the product.
• Soware or data loss occurring during repair or replacement.
• Any damage of the product due to shipment.

19
• Causes external to the product, such as electric power uctuaons or failure.
• Use of supplies or parts not meeng ViewSonic’s specicaons.
• Failure of owner to perform periodic product maintenance as stated in the User
Guide.
• Any other cause which does not relate to a product defect.
• Damage caused by stac (non-moving) images displayed for lengthy periods of
me (also referred to as image burn-in).
• Soware - Any third-party soware included with the product or installed by the
customer.
• Hardware/Accessories/Parts/Components – Installaon of any unauthorized
hardware, accessories, consumable parts or components (e.g. Projector Lamps).
• Damage to, or abuse of, the coang on the surface of the display through
inappropriate cleaning as described in the product User Guide.
• Removal, installaon, and set-up service charges, including wall-mounng of the
product.
How to get service:
• For informaon about receiving service under warranty, contact ViewSonic®
Customer Support (Please refer to the “Customer Service” page). You will need
to provide your product’s serial number.
• To obtain warranty service, you will be required to provide: (a) the original dated
sales slip, (b) your name, (c) your address, (d) a descripon of the problem, and
(e) the serial number of the product.
• Take or ship the product, freight prepaid, in the original container to an
authorized ViewSonic® service center or ViewSonic®.
• For addional informaon or the name of the nearest ViewSonic® service center,
contact ViewSonic®.
Limitaon of implied warranes:
There are no warranes, express or implied, which extend beyond the descripon
contained herein including the implied warranty of merchantability and tness for a
parcular purpose.

20
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product.
ViewSonic® shall not be liable for:
• Damage to other property caused by any defects in the product, damages
based upon inconvenience, loss of use of the product, loss of me, loss of
prots, loss of business opportunity, loss of goodwill, interference with business
relaonships, or other commercial loss, even if advised of the possibility of such
damages.
• Any other damages, whether incidental, consequenal or otherwise.
• Any claim against the customer by any other party.
• Repair or aempted repair by anyone not authorized by ViewSonic®.
Eect of state law:
This warranty gives you specic legal rights, and you may also have other rights
which vary from state to state. Some states do not allow limitaons on implied
warranes and/or do not allow the exclusion of incidental or consequenal
damages, so the above limitaons and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty informaon and service on ViewSonic® products sold outside of the
U.S.A. and Canada, contact ViewSonic® or your local ViewSonic® dealer.
The warranty period for this product in mainland China (Hong Kong, Macao,
and Taiwan Excluded) is subject to the terms and condions of the Maintenance
Guarantee Card.
For users in Europe and Russia, full details of warranty provided can be found at:
http://www.viewsonic.com/eu/ under “Support/Warranty Informaon”.