Vigilate VIGOSB User manual

User Manual
VIGOSB Wireless Outdoor
Siren & Strobe
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
①This device may not cause harmful interference.
②This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.

Siren Duration
Volume Setting for SOS Tone
Volume Setting for Prompt Tone
Prompt Light for SOS Trigger
Prompt Tone for Changing
System Status
• Power Supply DC12V 1A
• Battery 3 x D(LR20) dry cells
• Transmission Distance Up to 1000m Line of Sight
• Standby Current ≤110µA
• Working Current ≤400mA
• Siren Volume 115dB@30cm
•Lens Colour Blue
• Working Temperature -20℃~60℃
• Humidity 90%rh(non-condensing)
• IP Grade IP54
• Bubble Level Yes
• Tamper Device Supported
• Prompt Light and Tone Adjustment Supported
• Battery Standby Time 36 Months
• Housing Material PC+ABS+Anti-UV
• Weight 765.9g(battery not included) 1185g(battery included)
• Dimension 277.5x233x75mm (LxWxH)(±0.1mm)
;
Light indicator
Mounting Screw Hole
Bubble Level
Battery Case
Power Connection
Test Button
Reset
Water-proof cover
Horn
Tamper Device
Lighting Position Right Le Both Both
Appearances
Tamper Detector
On/O Switch
Pairing with main panel by App
① Install the batteries and turn on the siren. Make sure the indicator is flashing, otherwise please reset it.
②Scan the QR code on the siren with APP.
③The pairing can be confirmed in App and the siren will beep twice.
*Test: You can also press "Test" button in the App to check whether the siren is paired successfully or
not.
Settings
Product Overview
The wireless outdoor siren and strobe is an accessory of the VIGILATE smart alarm system.
It has an extremely powerful 115dB outdoor siren and could has a standby time of up to 36 months
using 3xD(LR20) dry cell batteries.Mount it on the outside of the house and show potential burglars
that your home is protected. It’s simple to setup, reliable and safe, and is equipped with core
microprocessor and anti-tamper function.Itwill alarm and push notifications will be showed in the
App when it is tampered.
The light indicator will light up once every 15 seconds in the event of low battery and a push notification
will be sent to the APP.
Specifications
Lighting Eects(Configurable)
Working Status Home Arm Arm Disarm SOS
Lighting Modes Flash/OFF Flash/OFF Flash/OFF Flash Sharply/OFF