Vigitron MaxiiCopper Vi2304A User manual

Application Drawing
Vi2304A/Vi2308A/Vi2316A UTP Ethernet Extender’s Installation Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions www.vigitron.com
The MaxiiCopper Model Vi2304A, Vi2308A and Vi2316A hubs are revolu-
tionary data transmission devices that extend full-duplex High-Speed
Ethernet over existing or new UTP infrastructures. They extend 10BaseT
signals up to 3,000 ft. (909M), 100BaseT up to 2,100 ft. (640m) for 802.3 af
and 800 ft. (242m) for 802.3 at. They employ MaxiiCopper, an innovative
and unique Ethernet extension technology, that is designed to take full
advantage of high-bandwidth UTP cables and maintain a full-duplex 10 or
100 Mb/s Ethernet connection up to the maximum range - with minimum
transmission error and latency. Multiple remote network devices such as
Mega-pixel IP cameras or VoIP can be connected to a central LAN switching
fabric with ease. Their dual-rate capability provides an easy way to balance
the best possible network throughput and long-reach distance design. The
Vi2304A, Vi2308A and Vi2316A support 4, 8 and 16 ports. 1 pair can be
used for both 10BaseT and 100BaseT signals. 4 Pair is restricted to
100BaseT use.
These hubs need to be deployed along with Vi2301A on the remote end of
each UTP cable. They are equipped with LEDs to provide link status and
configured data rate for each port. They are completely transparent to the
corporate IP network and higher layer protocols and require no IP program-
ming or other configurations.
The Vi2308A and Vi2316A are offered in 19 inch 1U height enclosure for
rack-mount or wall-mount applications. They are ideal for medium to large
scale IT networking or digital CCTV projects. The UTP cable needs to be
point to point without any branches.
Ethernet Extenders
Important Safety Warning
Ethernet Switch/NVR-end Installation
- Connect the chassis ground screw to a solid earth ground.
- Connect the RJ45 connector of the Ethernet switch to the 10/100BaseT
Ethernet port of Vi2304A/Vi2308A/Vi2316A using a standard Cat5/6 cable
of maximum 100 m in length.
- Connect long UTP cables to the RJ45 connectors of the extender hub.
- Connect the 12V power supply to the power connector of the extender hub.
The link LED on the 10/100 Ethernet connectors should be “ON” to indicate
proper connection between the switch and Ethernet ports of
Vi2304A/Vi2308A/Vi2316A. While the Link LED, Orange for 100BaseT and
Green for 10BaseT, on the extended side, in a steady state will indicate
confirmed connection between extenders.
- Read and keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should conform to all local
codes.
- DO NOT bundle UTP or UTP signals in the same conduit as high-voltage wiring.
- To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture,
dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
- DO NOT install the unit in a place where the operating ambient temperature exceeds 75°C.
- Make sure that the external power supply output voltage is in the recommended range.
- Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including DVRs and NVRs) that produce heat.
- Protect the power cord from being walked on or pinched particularly at power source,
convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when a power supply cord or plug is damaged, liquid
has been spilled, objects have fallen inside the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
- The main plug is used as the disconnect device and shall remain readily operable.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and
shall remain readily operable.
IP Camera
Cat-5
Data
NVR
Network Switch
Vi2301A
Vi2316A
IP Camera
Up to 3,000 ft./909 m UTP
Cat-5
Vi2301A
Cat-5
(100 m)
Up to 3,000 ft./909 m UTP
- If you like to power the unit using a local power supply connect the 12VDC
power supply to the power connector of the Vi2301A. A power adapter
connector is provided to simplify connection.
- If no power supply is plugged in the unit will use PoE. When using PoE the
camera has to be powered by PoE also.
- Connect the IP camera RJ45 connector to the “10/100BaseT Ethernet” port
of Vi2301A using a standard Cat5/6 cable of maximum 100 m in length.
- Connect one end of the long UTP cable to the “Extended Ethernet” RJ45
connector of Vi2301A.
The link LED on the 10/100 connector should be “ON” to indicate proper
connection between the camera and Vi2301A.

Limited Lifetime Warranty
Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance
with these instructions, will be free of defects in material and workmanship for
lifetime defined as the duration period of time until product end of life is announce-
ment. After which Vigitron will continue to provide warranty services for a period of 3
years. Period covering valid warranty will be determined by proof of purchase in the
form of an invoice from an authorized Vigitron dealer.
Warranty will only be provided for as long as the original end user purchaser owns
the product. Warranty is not transferrable. At Vigitron's option, defective product will
be repaired, replaced or substituted with a product of equal value. This warranty
does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage
from shipment, handling, storage, accident, abuse or misuse, or if it has been used
or maintained not conforming to Product manual instructions, has been modified, or
serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an
approved agent will void this warranty. Vigitron, Inc. shall not under any circum-
stances be liable to any person for any incidental, indirect or consequential
damages, including damages resulting from use or malfunction of the product, loss
of profits or revenues or costs of replacement goods. The maximum liability of
Vigitron, Inc. under this warranty is limited to the original purchase price of the
Product only.
Technical Specifications*
Drawings
Status LEDs
LED Name Color Status Function
OFF Power is OFF
ON Power is ON
OFF No Traffic
FLASHING Traffic
GREEN ON Connection is OK, 10BaseT Mode
ORANGE ON
Connection is OK, 100BaseT Mode
OFF No connection
FLASHING Connection is OK with Traffic
OFF No connection
ON Connection is OK
Link
(Standard Side) YELLOW
Power RED
Traffic
(Extended Side) YELLOW
10/100 BaseT
(Extended Side)
Traffic
(Standard Side) GREEN
Activity
10/100BaseT
© Copyright 2013 Vigitron, Inc.
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com
Electrical
Ethernet Interface Standard 10/100BaseT, Full duplex only
Ethernet Rate Auto select 10/100 Mb/s
Full speed / full duplex at maximum rated distance
UTP** 100 Ohm, 3,000 ft (909 m) at 10BaseT 802.3 af
800 ft. (242m) at 100BaseT 802.3 at
Power Supply 12 VDC, 2.5 A
Status LEDs Extended Ethernet:Green/OrangeLED, 10/100BaseT
Yellow LED, Activity
Standard Ethernet:Green LED, Activity
Yellow LED, Link
Power On: Red LED
Connectors Ethernet Interface: RJ-45 Connector
Extended Interface: RJ-45 Connector
Power: IEC380-8 inlet
Environmental
Humidity 0 to 95%, non-condensing
Temperature Operating: -40°C to +75°C
Storage: -40°C to +80°C
Mechanical
Dimensions Vi2304A: 1.15x3.6x3.3 in., 4.2x9.2x8.4 cm (HxWxL)
Vi2308A: 1.75x3.25x17 in., 4.4x8.25x43 cm (HxWxL)
Vi2316A: 1.75x3.25x17 in., 4.4x8.25x43 cm (HxWxL)
Weight Vi2304A: 0.584 lb, 265 g
Vi2308A: 1.8 lb (0.82 Kg)
Vi2316A: 3.25 lb (1.5 Kg)
Material Aluminum
Accessories
12 VDC, 3 A wall-mount power supply (optional)
Rack mount brackets
*Specifications subject to change without notice.
**Distance figures are obtained using in house testing mirroring installations. Factors such as cabling, connections
use of power and environmental conditions may affect actual distances and should be taken into consideration.
Vi2316A_Instruction Manual
Vi2308A Ethernet Extender Hub
1 2 3 4 5 6 7 8
Vi2316A Ethernet Extender Hub
1 2 3 4 5 6 7 8 910 11 12 13 14 15 16
910 11 12
Link
Activity
Standard Ethernet ports
Extended Ethernet ports
Vi2304A Ethernet Extender Hub
1 2 3 4
3.6"
9.2cm
1.6"
4.2cm
PART No. Description
Vi2301 Single port UTP Ethernet Extender
Vi2304A 4-port UTP Ethernet Extender
Vi2308A 8-port UTP Ethernet Extender, 19”, 1U
Vi2316A 16-port UTP Ethernet Extender, 19”, 1U
Vi0014 12VDC, 3A Wall-mount Power Supply
Ordering Information
RoHS
Standard
Ethernet
Extended
Ethernet
Extended
Ethernet
Extended
Ethernet
Extended
Ethernet
Extended
Ethernet
Extended
Ethernet
Standard
Ethernet
Standard
Ethernet
Standard
Ethernet
Standard
Ethernet
Standard
Ethernet
Standard
Ethernet
Extended
Ethernet
Standard
Ethernet