Viking Designer DDSF136DSS User manual

Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
[phone]
For product information,
call 1-888-VIKING1 (845-4641)
or visit t e Viking Web site at
vikingrange.com
F20713 EN (012010)
Viking Installation Guide
Professional & Designer Freestanding
Refrigeration Side Trim, Side Panel,
Top Panel & Grille Installation

3
3
4
A
Apply ad esive tape to grille assembly.
2
Required Components Remove and discard screw and inge cover, if
applicable.
Remove edge of corner cover.
A
B
Left Shim
Trim
Left SideTrim
Right Shim
Trim Right Side
Trim Front Grille
Adhesive
Tape
Screws
Grille Spacer
L-Bracket Right
L-Bracket Left
1
2
Installation - Side Trim and Grille
(Built-In Installation) (cont.)
Attac brackets and spacers, included in t e kit, to t e
grille assembly wit four A screws.
5
1
2
Remove ad esive backing. Firmly press t e grille
assembly down so t e ad esive ad eres to t e cabinet.
Align grille assembly to front door and position grille
on top of unit.
Professional & Designer
Freestanding Refrigerators
Description VCSF/DDSF136D with side panels/tops/grilles
Overall widt wit side panels 35-7/8” (91.1 cm)
Overall eig t wit tops/grilles 71-7/8” (182.6 cm)
Cutout widt wit side panels 36” (91.4 cm)
Cutout eig t wit tops/grilles 72” (182.9 cm)
Specifications

54
Installation - Side Panel, Top Panel and Grille
(Wrapped Installation)
Required Components Remove and discard screw and inge cover, if
applicable. (Repeat if two inges are used.)
1
Left Panel Right Panel
Top Panel
Front Grille
Caps
AB
Screws
C
Remove edge of corner cover.
2
A
A - Designer Series
B - Pro Series
3
Wit top panel and grille upside down, position grille
assembly in front of top panel. Secure top panel to grille
assembly via four outer oles and t ree inner oles.
Remove ad esive backing from t e side panel. Fit t e
side panel to t e front of t e unit first.
2
1
4
Attac rear of side panels wit screws.
NOTE: T e oles on t e side panel are clearance oles.
5
Installation - Side Trim and Grille
(Built-In Installation) (cont.)
6
B
Secure t e grille brackets to t e oles in t e inge
plate wit two B screws.
7
72”
Raise t e unit up until t e measurement from t e floor
to t e top of t e grille assembly is 72 inc es or 6 feet.
8
2
2
1
9
2
2
1
complete
S im trim as ad esive backing on bot sides. Remove ad esive
backing on refrigerator side only. Fit t e s im trim to t e front of t e
unit first. Locate t e top of t e s im trim wit t e top of t e
refrigerator cabinet.
Remove ad esive backing for t e side trim. Locate t e
top of t e side trim wit t e top of t e grille assembly.
Press t e side trim into t e refrigerator cabinet at t e
center location.

76
Installation - Side Panel, Top Panel and Grille
(Wrapped Installation) (cont.)
Remove ad esive backing from ot er side panel. Fit t e
side panel to t e front of t e unit first. Spacer on top of
side panel needs to sit on top of refrigerator cabinet.
6
1
2
2
Attac rear of side panels wit screws.
NOTE: T e oles on t e side panel are clearance oles.
7
8
Align top panel and grille assembly to front door and
position top panel and grille on top of unit.
C
9
10
Insert screws t roug oles of top panel into side
panel.
Insert cap covers into oles.
complete