Viking F20481 User manual

Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
[phone]
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
F20481A EN
13040803
(042709J)
Viking Installation G ide
Freestanding Bottom-Mo nt/
French Door Bottom-Mo nt
Side-By-Side Refrigerator/Freezer
UL
C
UL

Warnings & Important Information____________________________________________________________3
Professional
Dimensions (36” Bottom-Mount & French Door Bottom-Mount) __________________________6
Specifications (36” Bottom-Mount & French Door Bottom-Mount) ________________________7
Dimensions (36” Side-By-Side & Side-By-Side with Dispenser) ____________________________8
Specifications (36” Side-By-Side & Side-By-Side with Dispenser) __________________________9
Designer
Dimensions (36” Bottom-Mount & French Door Bottom-Mount) _________________________10
Specifications (36” Bottom-Mount & French Door Bottom-Mount) _______________________11
Dimensions (36” Side-By-Side & Side-By-Side with Dispenser) ___________________________12
Specifications (36” Side-By-Side & Side-By-Side with Dispenser)_________________________13
Water Line & Electrical Location _____________________________________________________________14
Important Safety Instructions ________________________________________________________________15
Proper Disposal _____________________________________________________________________________16
General Information_________________________________________________________________________17
Unpacking & Moving____________________________________________________________________17
Water Supply Requirements _____________________________________________________________19
Door & Drawer Removal
Bottom-Mount (Door) ___________________________________________________________________20
French Door Bottom-Mount (Door) ______________________________________________________21
Bottom-Mount (Drawer) _________________________________________________________________23
Side-By-Side (Door) _____________________________________________________________________24
Door & Drawer Reinstallation
Bottom-Mount (Door) ___________________________________________________________________27
French Door Bottom-Mount (Door) ______________________________________________________28
Bottom-Mount (Drawer) _________________________________________________________________29
Side-By-Side (Door) _____________________________________________________________________30
Installation
Connect to Water Supply _______________________________________________________________32
Leveling (Bottom Mount & French Door Bottom-Mount) _________________________________34
Leveling (Side-By-Side)__________________________________________________________________35
Door Leveling (Side-By-Side & Bottom-Mount) __________________________________________36
Complete the Installation _______________________________________________________________37
Water Filter (Dispenser Models) _________________________________________________________38
Performance Checklist ______________________________________________________________________39
Service & Registration_______________________________________________________________________40
Table of Contents
3
IMPORTANT–Please Read and Follow!
It is the customer’s responsibility to:
• Contact a qualified electrical installer.
• Read all instructions before using the
refrigerator.
• Observe all local codes and ordinances.
Install refrigerator according to installation
instructions. All connections for water,
electrical power and grounding must
comply with local codes and be made by
licensed personnel when required.
• Do not modify plug on power cord. If plug
does not fit electrical outlet, have proper
outlet installed by a qualified technician.
Replace worn power cords and/or loose
plugs.
• Assure that the electrical installation is
adequate and in conformance with the
National Electrical Code, ANSI/NFPA
70-latest edition or Canadian Electrical
Code C22.1-1998 and C22.2 No. 0-M91
(or latest edition), and all local codes and
ordinances. (115 volt, 60-Hz, 15 amp,
fused, electrical supply is required. It is
required that a separate circuit serving only
this appliance be provided. This appliance
is equipped with a power supply cord
having a 3-prong grounding plug. To
minimize possible shock hazard, the cord
must be plugged into a mating 3-prong,
grounding type wall receptacle. If a 2-
prong receptacle is encountered, the
customer must contact a qualified
electrical installer to have it replaced with a
properly grounded 3-prong receptacle. Do
not use an extension cord or adapter
plu .)
• Do not ground to a gas line or cold-water
pipe.
• Do not remove warning tag from power
cord.
• Refrigerator is designed to operate on a
separate 115 volt, 15 amp., 60 cycle line.
• Do not tamper with refrigerator controls.
• Do not service or replace any part of
refrigerator unless specifically
recommended in Use & Care or Installation
Instructions. Do not attempt service if
instructions are not understood or if they
are beyond personal skill level.
• Always disconnect refrigerator from
electrical supply before attempting to
change light bulbs, clean, or service the
refrigerator. Disconnect the power cord by
grasping the plug, not the cord.
• Always read and follow manufacturer’s
storage and ideal environment instructions
for items being stored in refrigerator.
• Never allow children to operate, play with,
crawl inside or stand on any part of the
refrigerator.
• Never clean refrigerator parts with
flammable fluids. The fumes can create a
fire hazard or explosion.
• Clean up spills or water leakage associated
with water installation.
• Keep your refrigerator in good condition.
Bumping or dropping refrigerator can
damage refrigerator or cause refrigerator
to malfunction or leak. If damage occurs,
have refrigerator checked by qualified
service technician.
2

54
WARNING
Suffocation Hazard
Remove doors from your old refri erator.
Failure to do so can result in death or
brain dama e.
IMPORTANT–Please Read and Follow!
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be preceded by the safety
alert symbol and the word “DANGER” or
“WARNING”. These words mean:
You can be killed or seriously injured if you
don’t immediately follow instructions.
You can be killed or seriously injured if
you don’t follow instructions.
All safety messages will tell you what the
potential hazard is, tell you how to reduce
the chance of injury, and tell you what can
happen if the instructions are not followed.
DANGER
WARNING
WARNING
Excessive Wei ht Hazard
Use two or more people to move and
install refri erator.
Failure to do so can result in back or
other injury.
WARNING
Electrical Shock Hazard
Plu into a rounded 3 pron outlet.
Do not remove round pron .
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
WARNING
Explosion Hazard
Keep flammable materials and vapors,
such as asoline, away from refri erator.
Failure to do so can result in death,
explosion, or fire.
WARNING
Electrical Shock Hazard
Disconnect power before removin doors.
Failure to do so can result in death or
electrical shock.
IMPORTANT–Please Read and Follow!

Specifications (Professional Bottom-Mount)
7
41-1/8”
(104.5cm)
24”
(61.0cm)
70-1/8”
(178.1cm)
min.
to
70-7/8”
(180.0cm)
max.
71-7/8”
(182.6cm)
min.
to
72-5/8”
(184.5cm)
max.
35-7/8”
(91.1 cm)
w/sidepanelsaccessory
35-5/8”
(90.5 cm)
23-1/2”
(59.7 cm)
28-3/4”
(73.0 cm)
26-3/4”
(67.9cm)
41-1/8”
(104.5 cm)
24”
(61.0cm)
70-1/8”
(178.1cm)
min.
to
70-7/8”
(180.0cm)
max.
71-7/8”
(182.6cm)
min.
to
72-5/8”
(184.5cm)
max.
35-7/8”
(91.1cm)
w/side panels accessory
35-5/8”
(90.5 cm)
23-1/2”
(59.7 cm)
26-3/4”
(67.9 cm)
28-3/4”
(73.0cm)
Dimensions (Professional Bottom-Mount)
6
36” Bottom-Mount
Description
VCBF036 VCFF036
Overall width 35-5/8” (90.5 cm)
Addition of side panels: 35-7/8” (91.1 cm)
Overall height 70-1/8” (178.1 cm) min. to 70-7/8” (180.0 cm) max.
Addition of top grilles: 71-7/8” (182.6 cm) min. to 72-5/8” (184.5 cm) max.
Overall depth from rear To front edge of side trim: 23-1/2” (59.7 cm)
To front edge of top grille: 26-3/4” (67.9 cm)
To front of handle endcap: 28-3/4” (73.0 cm)
Cutout height 70-1/2” (179.0 cm)
Addition of top grilles: 72” (182.9 cm)
Cutout width 36” (91.4 cm)
Cutout depth 24” (61.0 cm)
Electrical requirements 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
grounded 3-prong plug attached to product
Maximum amp usage 7.9 amps
Inlet water requirements 1/4” copper tubing inlet waterline; minimum 35 psi; maximum 120 psi
Overall interior capacities
Refrigerator
Freezer
Total capacity
Bottom-Mount
14.4 cu. ft. (407 liters)
5.5 cu. ft. (156 liters)
19.9 cu. ft. (563 liters)
French Door Bottom-Mount
14.1 cu. ft. (399 liters)
5.5 cu. ft. (156 liters)
19.6 cu. ft. (555 liters)
Approximate shipping weight 327 lbs. (148.7 kg)
36” Professional
36” Professional French Door
NOTE: When installing into a cutout, the edge of the door must be 2-7/8 (7.3 cm) from the
adjacent countertop/cabinet.

Specifications (Professional Side-By-Side)
9
70-1/2”
(179.0cm)
min.
to
71-1/4”
(181.0cm)
max.
71-7/8”
(182.6cm)
min.
to
72-5/8”
(184.5cm)
max.
35-7/8”
(91.1 cm)
w/sidepanelaccessory
35-5/8”
(90.5 cm)
23-1/2”
(59.7 cm)
28-3/4”
(73.0 cm)
26-3/4”
(67.9cm)
70-1/2”
(179.0cm)
min.
to
71-1/4”
(181.0cm)
max.
71-7/8”
(182.6cm)
min.
to
72-5/8”
(184.5cm)
max.
35-7/8”
(91.1cm)
w/sidepanelaccessory
35-5/8”
(90.5 cm)
23-1/2”
(59.7 cm)
28-3/4”
(73.0cm)
26-3/4”
(67.9 cm)
Dimensions (Professional Side-By-Side)
8
36” Professional
36” Professional
with Dispenser
36” Side-By-Side
Description
VCSF036 VCSF036D
Overall width 35-5/8” (90.5 cm)
Addition of side panels: 35-7/8” (91.1 cm)
Overall height 70-1/2” (179.0 cm) min. to 71-1/4” (181.0 cm) max.
Addition of top grilles: 71-7/8” (182.6 cm) min. to 72-5/8” (184.5 cm) max.
Overall depth from rear To front edge of side trim: 23-1/2” (59.7 cm)
To front edge of top grille: 26-3/4” (67.9 cm)
To front of handle endcap: 28-3/4” (73.0 cm)
Cutout height 70-1/2” (179.0 cm)
Addition of top grilles: 72” (182.9 cm)
Cutout width 36” (91.4 cm)
Cutout depth 24” (61.0 cm)
Electrical requirements 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
grounded 3-prong plug attached to product
Maximum amp usage 7.8 amps 9.4 amps
Inlet water requirements 1/4” copper tubing inlet waterline; minimum 35 psi; maximum 120 psi
Overall interior capacities
Refrigerator
Freezer
Total capacity
13.5 cu. ft. (382 liters)
8.0 cu. ft. (226 liters)
21.5 cu. ft. (608 liters)
13.5 cu. ft. (382 liters)
8.1 cu. ft. (229 liters)
21.6 cu. ft. (611 liters)
Approximate shipping weight 314 lbs. (141.3 kg)
NOTE: When installing into a cutout, the edge of the door must be 2-7/8 (7.3 cm) from the
adjacent countertop/cabinet.

11
41-1/8”
(104.5cm)
24”
(61.0cm)
70-1/8”
(178.1cm)
min.
to
70-7/8”
(180.0cm)
max.
71-7/8”
(182.6cm)
min.
to
72-5/8”
(184.5cm)
max.
35-7/8”
(91.1 cm)
w/sidepanelsaccessory
35-5/8”
(90.5 cm)
23-1/2”
(59.7 cm)
26-3/4”
(67.9 cm)
41-1/8”
(104.5cm)
24”
(61.0cm)
70-1/8”
(178.1cm)
min.
to
70-7/8”
(180.0cm)
max.
71-7/8”
(182.6cm)
min.
to
72-5/8”
(184.5cm)
max.
35-7/8”
(91.1cm)
w/sidepanels accessory
35-5/8”
(90.5 cm)
23-1/2”
(59.7 cm)
26-3/4”
(67.9 cm)
28-3/4”
(73.0 cm)
Dimensions (Designer Bottom-Mount)
10
36” Designer
36” Designer French Door
36” Bottom-Mount
Description
DDFB036 DDFF036
Overall width 35-5/8” (90.5 cm)
Addition of side panels: 35-7/8” (91.1 cm)
Overall height 70-1/8” (178.1 cm) min. to 70-7/8” (180.0 cm) max.
Addition of top grilles: 71-7/8” (182.6 cm) min. to 72-5/8” (184.5 cm) max.
Overall depth from rear To front edge of side trim: 23-1/2” (59.7 cm)
To front edge of top grille: 26-3/4” (67.9 cm)
To front of handle endcap: 28-3/8” (72.1 cm)
Cutout height 70-1/2” (179.0 cm)
Cutout width 36” (91.4 cm)
Cutout depth 24” (61.0 cm)
Electrical requirements 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
grounded 3-prong plug attached to product
Maximum amp usage 7.9 amps
Inlet water requirements 1/4” copper tubing inlet waterline; minimum 35 psi; maximum 120 psi
Overall interior capacities
Refrigerator
Freezer
Total capacity
Bottom-Mount
14.4 cu. ft. (407 liters)
5.5 cu. ft. (156 liters)
19.9 cu. ft. (563 liters)
French Door Bottom-Mount
14.1 cu. ft. (399 liters)
5.5 cu. ft. (156 liters)
19.6 cu. ft. (555 liters)
Approximate shipping weight 327 lbs. (148.7 kg)
Specifications (Designer Bottom-Mount)
NOTE: When installing into a cutout, the edge of the door must be 2-7/8 (7.3 cm) from the
adjacent countertop/cabinet.

Specifications (Designer Side-By-Side)
13
70-1/8”
(178.1cm)
min.
to
70-7/8”
(180.0cm)
max.
71-7/8”
(182.6cm)
min.
to
72-5/8”
(184.5cm)
max.
35-7/8”
(91.1 cm)
w/sidepanelaccessory
35-5/8”
(90.5 cm)
23-1/2”
(59.7 cm)
28-3/8”
(72.1 cm)
26-3/4”
(67.9 cm)
70-1/8”
(178.1cm)
min.
to
70-7/8”
(180.0cm)
max
71-7/8”
(182.6cm)
min.
to
72-5/8”
(184.5cm)
max.
35-7/8”
(91.1cm)
w/sidepanelaccessory
35-5/8”
(90.5 cm)
23-1/2”
(59.7 cm)
26-3/4”
(67.9 cm)
28-3/8”
(72.1cm)
Dimensions (Designer Side-By-Side)
12
36” Side-By-Side
Description
DDSF036 DDSF036D
Overall width 35-5/8” (90.5 cm)
Addition of side panels: 35-7/8” (91.1 cm)
Overall height 70-1/2” (179.0 cm) min. to 71-1/4” (181.0 cm) max.
Addition of top grilles: 71-7/8” (182.6 cm) min. to 72-5/8” (184.5 cm) max.
Overall depth from rear To front edge of side trim: 23-1/2” (59.7 cm)
To front edge of top grille: 26-3/4” (67.9 cm)
To front of handle endcap: 28-3/8” (72.1 cm)
Cutout height 70-1/2” (179.0 cm)
Addition of top grilles: 72” (182.9 cm)
Cutout width 36” (91.4 cm)
Cutout depth 24” (61.0 cm)
Electrical requirements 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
grounded 3-prong plug attached to product
Maximum amp usage 7.8 amps 9.4 amps
Inlet water requirements 1/4” copper tubing inlet waterline; minimum 35 psi; maximum 120 psi
Overall interior capacities
Refrigerator
Freezer
Total capacity
13.5 cu. ft. (382 liters)
8.0 cu. ft. (226 liters)
21.5 cu. ft. (608 liters)
13.5 cu. ft. (382 liters)
8.1 cu. ft. (229 liters)
21.6 cu. ft. (611 liters)
Approximate shipping weight 314 lbs. (141.3 kg)
36” Designer
36” Designer
with Dispenser
NOTE: When installing into a cutout, the edge of the door must be 2-7/8 (7.3 cm) from the
adjacent countertop/cabinet.

Important Safety Instructions
15
70-1/2”
(179.1 cm)
cutout without
addition of
tops/grilles
72”
(182.9 cm)
cutout with
addition of
tops/grilles
26”
(66.0 cm)
24”
(61.0 cm)
min.
36”
(91.4 cm)
14”
(35.6 cm)
Water line
location
Recommended
receptacle location
20”
(50.8 cm)
20”
(50.8 cm)
36”
(91.4 cm)
42”
(106.7 cm)
26”
(66.0 cm)
Water Line & Electrical Location
14
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Disconnect power before servicing.
• Replace all parts and panels before operating.
• Remove doors from your old refrigerator.
• Use nonflammable cleaner.
• Keep flammable materials and vapors, such as gasoline, away from refrigerator.
• Use two or more people to move and install refrigerator.
• Disconnect power before installing ice maker (on ice maker kit ready models only).
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the
refrigerator, follow basic precautions, including the following:
SAVE THESE INSTRUCTIONS

Proper Disposal (of old refrigerator)
16 17
General Information
Unpacking Unit
Your refrigerator was packed carefully for
shipment. Remove and discard all packaging
and tape. Do not remove the model/serial
number label.
When movin Your Refri erator:
Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to
protect the floor. Always pull the refrigerator
straight out when moving it. Do not wiggle or
“walk” the refrigerator when trying to move it,
as floor damage could occur.
Location
• Do not install refrigerator near oven, radiator
or other heat sources. If not possible, shield
refrigerator material.
• Do not install where the temperature falls
below 55 F (13 C) or rises above 110 F
(43 C). Malfunctions can occur at these
temperatures.
• Refrigerator is designed for indoor
household application only.
Measurin the Openin
When installin your refri erator, measure
carefully. Allow 1/2” (1.3 cm) space at top
and 1/2” (1.3 cm) behind the machine
compartment cover (located in the rear) for
proper air circulation. Sub-floorin or floor
coverin s (i.e. carpet, tile, wood floors,
ru s) may make your openin smaller than
anticipated. Some clearance may be ained by
usin the levelin procedure under “Levelin ”.
When installin your refri erator next to a
fixed wall, leave 2 7/8” (7.3 cm) minimum on
the hin e side to allow for the door to swin
open.
Before You Throw Away Your Old Refri erator or Freezer:
• Take off the doors.
• Leave the shelves in place so that children may not easily climb inside.
IMPORTANT:
Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still
dangerous - even if they will sit for “just a few days.” If you are getting rid of your old refrigerator, please
follow these instructions to help prevent accidents.
WARNING
Suffocation Hazard
Remove doors from your old refri erator.
Failure to do so can result in death or brain dama e.
WARNING
Excessive Wei ht Hazard
Use two or more people to move and
install refri erator.
Failure to do so can result in back or other
injury.
WARNING
Explosion Hazard
Keep flammable materials and vapors,
such as asoline, away from refri erator.
Failure to do so can result in death,
explosion, or fire.

General Information
Water Supply Requirements
A cold water supply with water pressure of
between 35 and 120 psi (241 and 827 kPa) is
required to operate the water dispenser and
ice maker. If you have questions about your
water pressure, call a licensed, qualified
plumber.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water
supply coming out of a reverse osmosis
system going to the water inlet valve of the
refrigerator needs to be between 35 and
120 psi (241 and 827 kPa).
If a reverse osmosis water filtration system is
connected to your cold water supply, the
water pressure to the reverse osmosis
system needs to be a minimum of 40 to 60
psi (276 to 414 kPa).
If the water pressure to the reverse osmosis
system is less than 40 to 60 psi (276 to 414
kPa):
• Check to see whether the sediment filter in
the reverse osmosis system is blocked.
Replace the filter if necessary.
• Allow the storage tank on the reverse
osmosis system to refill afer heavy usage.
• If your refrigerator has a water filter, it may
further reduce the water pressure when
used in conjunction with a reverse osmosis
system. Remove the water filter.
If you have questions about your water
pressure, call a licensed, qualified plumber.
1918
Moving Unit
• NEVER transport the refrigerator on its side. If
an upright position is not possible, lay the
refrigerator on its back. Allow refrigerator to
sit upright for approximately 30 minutes
before plugging it in to assure oil returns to
the compressor. Plugging the refrigerator in
immediately may cause damage to internal
parts.
• Use an appliance dolly when moving
refrigerator. ALWAYS truck refrigerator from
its side or back - NEVER from its front.
• Protect outside finish of refrigerator during
transport by wrapping cabinet in blankets
or inserting padding between the refrigerator
and dolly.
• Secure refrigerator to dolly firmly with straps
or bungee cords. Thread straps through
handles when possible. Do not overtighten.
Overtightening restraints may dent or
damage outside finish.
Electrical Requirements
Before you move your refrigerator to its final
location, it is important to make sure you
have the proper electrical connection.
Recommended Groundin Method
A 115 Volt, 60 Hz., AC only 15- or 20-amp
fused, grounded electrical supply is required.
It is recommended that a separate circuit
serving only your refrigerator be provided.
Use an outlet that cannot be turned of by a
switch. Do not use an extension cord.
NOTE: Before performing any type of
installation, cleaning, or removing a light
bulb, turn the refrigerator OFF. Press the
freezer Down Arrow control until a dash (-)
appears in both the Freezer and Refrigerator
displays. Disconnect the refrigerator from the
electrical source. When you are finished,
reconnect the refrigerator to the electrical
source and reset the temperature controls to
the desired setting.
General Information
WARNING
Electrical Shock Hazard
Plu into a rounded 3 pron outlet.
Do not remove round pron .
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.