Vimar ELVOX 46312.004 User manual

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert
the user to the presence of uninsulated dangerous voltage within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
INFORMATION - This equipment has been tested and found to comply with limits for a ClassA
digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at their own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.
2. Safety Instructions
• This camera should be installed by qualied personnel only
• There are no user serviceable parts inside
• Do not disassemble this camera other than to make initial adjustments
• Use a UL approved regulated 24 voltAC or 12 volt DC power supply
• Use appropriate low voltage power cable to prevent re or electrical shock
• Please insure that your installation area can support the weight of the camera
• Do not use a strong or abrasive detergent when cleaning the camera
• Do not expose the camera to direct sun
• Do not install camera in places where humidity is high
• Do not install near cooling or heating device
• Do not expose camera to rain or moisture
Precautions for use
Please handle this camera carefully
1. Precautions
Do not install the camera in extreme
temperature conditions.
Do not touch the front lens of the camera.
Do not expose the camera to rain or spill
liquids on it.
Do not install or use the camera in an
environment where the humidity is high.
Do not install or use the camera in an
environment where the humidity is high.
Never keep the camera pointed directly at
strong light.
Do not expose the camera to radioactivity.
Do not install the camera under unstable
lighting conditions.
Do not drop the camera or subject it to
physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially
careful to provide ventilation when
operating under high temperatures.
This is one of the most important
parts of the camera. Be careful not to
leave fingerprints on the lens cover.
If it gets wet, wipe dry immediately.
Liquids can contain minerals that
corrode the electronic components.
It can cause malfunctions to occur.
If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed
to spotlight or object
reflecting strong light,
smear or blooming may
occur.
* please check that the
power satisfies the normal
specification before
connecting the camera.
This installation should be made by a qualified service person and should conform to
all local codes.
Installation and operation manual
CCTV S6I.46312.004.EN RL. 00 13 03
ELVOX - Campodarsego - Italy
Via Pontarola, 14/a
35011 Campodarsego PD - Italy
Tel. [phone]
Fax [phone]
www.elvox.com
46312.004
HD-SDI fullHD Bullet IR Camera, 4mm Lens
CCTV CCTV
EN EN
CCTV

CCTV CCTV
EN EN
CCTV CCTV
EN EN
BOLT, HEXAGON SOCKET
4EA
L-WRENCH
1EA
Instruction Manual
1EA
REC BASE ADAPTOR
BRACKET 1EA
SCREW
4EA
8. Package
4. Key Features
5. Specifications
6. Cable Connection
7. Camera Connection
3. Dimension
4. Key Features
• 1/2.8” Sony Progressive Scan Color CMOS Sensor
• 1080(1920x1080)@25fps
• TV Out(BNC) With NTSC / PAL Selectable
• Dual Output-Megapixel HD CCTV(BNC) & SD CCTV(BNC) Out
• Backlight Compensation Using a Powerful Pixel Control WDR
• High Resolution Digital Zoom(x8)
• Flicker suppression
• No noise, Ghosting Effect With DNR
• True Day/Night with ICR
• Power DC 12V
100 210
100
Sensor type
Total pixels
Active pixels
Resolution
Scanning system
Min. illumination
Video Output
S/N Ratio
Lens
AGC
Shutter Speed
Digital Slow Shutter(Sens-UP)
WDR/BLC/HLC
SHADING(LSC)
Day & Night
White Balance
DNR
Mirror H/V
D-ZOOM
D-WDR
Privacy
Motion Detection
Communication
Poewr Source
Poewr Consumption
Storage Temperature
Operating Temperature
Dimension(W x H x D)
Weight
1/2.8" SONY 2Mega C-MOS Sensor
2000(H) X 1121(V) 2.24Mega Pixel
1984(H) X 1105(V) 2.19Mega Pixel
1920 X 1080 (1080P / 30fps)
Progressive Scan
IR LED ON : 0 Lux @F1.2 (Sens-UP X64)
HD-SDI, CVBS
More than 48dB
4mm Fixed Board Lens
1 ~ 20 Level Adj
1/25, 1/30 ~ 1/60,000 sec
OFF/Auto(x2 ~ x64)
OFF/WDR/BLC/HLC (WDR ON : CVBS OFF)
OFF/ON
Auto/Day/Night/Ext
ATW/AWC/Manual/PRESET
OFF/Low/Middle/Hight
OFF/ON
x8
OFF/ON
OFF/32 Positions
1 Zone ON/OFFSensitivity/Area setting
RS-485(Pelco-D, Pelco-P)
DC 12V
IR LED ON:800mA
-20ºC ~ +60ºC(Humidity : 20%RH ~ 95%RH)
-10ºC ~ +50ºC(Humidity : 20%RH ~ 80%RH)
100mm(W) X 100mm(H) X 210mm(D)
1400g
MODEL 46312.004
HD(High Definition) Surveillance
HD-SDI Camera provides the superb surveillance conditions than normal
VGA camera.
SVGA 800x600
16:9 HD1280x720
1.3M 1280x1024
2M 1920(H)x1080(V)
SDI Signal
SDI
100 210
100
4mm Fixed Board Lens
Camera
1EA
VIDEO TEST CABLE
1EA FOCUS DRIVER 1EA
*4mm Fixed Board Lens / IR LED Built-in 56pcs
Digital Video Security System