VINCI NITRO COLD BREW User manual

NITRO COLD BREW
www.vincihousewares.com | 888.735.3621 | [e-mail]
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY

1 2
TABLE OF CONTENTS
Table of Contents ....................................................................
Introduction ............................................................................
Getting to Know your Vinci Nitro Cold Brew .........................
How to Assemble the Spear System .......................................
How to Use the Vinci Nitro Cold Brew ....................................
How to Clean ..........................................................................
Tips for Use and Care..............................................................
1
2
3
4
6
8
10
NITRO COLD BREW
www.vincihousewares.com | 888.735.3621 | [e-mail]
Welcome to the Vinci Housewares family. We are happy you are here!
We love Cold Brew and love to use it to make Nitro Cold Brew Coffee.
Nitro Cold Brew is a coffee drinker’s favorite because of the smooth,
bold flavor and creamy mouthfeel. However, buying this delicious
concoction from the barista can really add up!
Now with the Vinci Nitro Cold Brew, homemade Nitro Cold Brew
Coffee is only moments away. Simply add up to 1.1L of cold brew
coffee, charge with a Nitrous Oxide cartridge, shake and chill. Your
Nitro Cold Brew is ready to be dispensed straight from the Mini Keg.
Be sure to check out our Vinci Express Cold Brew Coffee Maker at:
https://vincihousewares.com/products/express-cold-brew, it is the
perfect complement to your Vinci Nitro Cold Brewer making
Cold Brew Coffee in just 5-25 minutes.

3 4
1. Attach the Pick Up Hose (G) to the bottom of
the Spear with Pressure Relief Valve (B) by pushing
the hose all the way up, covering the threads on
the end of the spear nipple.
2. Insert the Spear with Pressure Relief Valve (B)
with the attached Pick Up Hose (G) into the Mini
Keg (A).
3. Once Inserted, Rotate the Spear with Pressure
Relief Valve (B) Clockwise to tighten.
4. Align the Stout Faucet (F) to the Spear with
Pressure Relief Valve (B). There are grooves that
help hold the position before tightening the ring
on the Spear (B).
IMPORTANT:
• Clean all parts before rst use.
• Do NOT put any parts in the
dishwasher.
How to:
ASSEMBLE
Before using your Nitro Cold Brew for the rst time, please familiarize yourself with the various parts of
the machine and how it functions.
Before rst use, and after subsequent uses, wash all parts with warm soapy water. Carefully read all the
instructions and save this manual for future reference.
A. Mini Keg
B. Spear with Pressure Relief Valve
C. Cartridge Holder
D. Stout Handle Cap
E. Stout Handle
F. Stout Faucet
G. Pick Up Hose (3 pieces)
H. Faucet Wrench
I. Spill Mat
J. Large Keg Brush
K. Small Faucet Brush
F
D
E
C
JK
A
GH
I
B
Spear
Nipple
Threads
HOW TO ASSEMBLE THE SPEAR SYSTEM
GETTING TO KNOW YOUR VINCI NITRO COLD BREW

5 6
1. Pour 1.1L (1100 mL) of cold brew coffee into the
Mini Keg (A).
MAX FILL
IMPORTANT:
While the Mini Keg (A) has a capacity of 2 liters,
never exceed 1.2 liters of fluid in the Mini Keg (A),
otherwise the nitro will not be able to blend with
the cold brew properly and the Mini Keg (A) will
not pressurize properly.
NOTE:
For best results, use the Vinci Express Cold Brew
Maker and Vinci Cold Brew Coffee. To learn more
visit www.vinciwarehousewares.com and look for
the Vinci Express Cold Brew Maker that makes
cold brew in as little as 5 minutes and the Vinci
Express Cold Brew Coffee that is specically
formulated and perfectly portioned to make the
best cold brew coffee with the Vinci Express Cold
Brew system.
2. After the Mini Keg (A) has been properly lled,
insert the assembled spear system and turn it
clockwise to tighten.
IMPORTANT:
Do NOT put any parts in
the dishwasher.
How to Use:
3. Place an 2g non-threaded Nitrogen (N2)
cartridge or a 8g non-threaded Nitrous Oxide
(N2O) into the Cartridge Holder (C) with the
nipple end of the cartridge at the open end of the
Cartridge Holder (C). Screw the loaded Cartridge
Holder (C) onto the gas connection on the Spear
(B). Turn clockwise until the gas cartridge is
pierced. You should hear a “whistle” sound as the
gas lls the Mini Keg (A).
NOTE:
We recommend using 8g non-threaded Nitrogen
(N2O) cartridge for a rich and creamy beverage.
7. Place the Stout Handle (E) over the Stout
Faucet (F) and screw the Stout Handle Cap (D)
onto the faucet threads, as shown above, securing
the Stout Handle (E) to the Stout Faucet (F). This
will complete the spear system for the Nitro
Cold Brew.
5. When you correctly position the Stout Faucet (F),
push both the Spear (B) and the Stout Faucet (F)
together and rotate the ring on the Spear with
Pressure Relief Valve (B) clockwise to tighten. Use
the Faucet Wrench (H) to help continue to tighten.
8. After the Nitro Cold Brew spear system has
been assembled, remove the spear system
assembly by turning it counterclockwise. After
the spear system has been removed, proceed
to “How to use the Nitro Cold Brew” section on
page 6.
6. If the locking nut is found on the threaded
end of the Spout Faucet (F), it must be removed.
Remove the locking nut from the unit by turning it
counterclockwise.
How to Install: FIG. A FIG. B
HOW TO USE THE VINCI NITRO COLD BREW

7 8
4. Cover the opening of the lled Mini Keg (A) to
prevent any spills, shake for 10 seconds and let sit
for 10 minutes.
3. Fill the Mini Keg (A) with hot water and add 1
tablespoon of baking soda.
2. Fill and empty the Mini Keg (A) with hot water.
Repeat this step 3 times.
1. Disassemble the Nitro Cold Brew to clean all the
components properly. You may need to use the
Faucet Wrench (H) to remove the Stout Faucet (F)
from the Spear (B).
IMPORTANT:
Do NOT put any parts in
the dishwasher.
IMPORTANT:
• Do NOT put any parts in the dishwasher as it
may damage the unit and void warranty.
• The Nitro Cold Brew MUST be cleaned after use.
HOW TO CLEAN:
How to:
CLEAN
4. Shake the lled cold brewed Mini Keg (A) and
attached cartridge for 30 - 60 seconds. This is a
necessary step as shaking the Mini Keg (A) allows
the gas to infuse with the cold brew. After shaking,
put the Mini Keg (A) into the refrigerator for at
least 1 hour for chilling.
5. After Nitro Cold Brew has chilled, place it on the
Vinci Spill Mat (I) and position your cup under the
Stout Faucet (F) spout. Press down on the handle to
begin extracting the nitro cold brew from the Mini
Keg (A).
NOTE:
When all the cold brew has been dispensed from
the Mini Keg (A), you must depress the handle to
ensure all the pressurized gas is evacuated before
unscrewing the spear system.

9 10
Maintaining and using the Nitro Cold Brew Coffee Maker is easy, but there are a few things you need to
keep in mind to maintain and fully enjoy your unit:
• After cleaning the Mini Keg (A), place upside down on a clean towel or allow to air dry uncovered.
Make sure the cap is left off until the inside of the Mini Keg (A) is completely dry.
• Do not microwave or freeze Mini Keg (A).
• Never put your Mini Keg (A) in the dishwasher.
• This product is not designed for hot liquids, nonfood items, or caustic, highly acidic materials.
• Not guaranteed against leakage from above-average tap pressure.
• Not to be used for fermenting.
• Keep small parts away from children.
• Never overll Mini Keg (A) the gas needs room to expand, so always leave 2-3 inches unlled from the
top to allow for expansion.
• For the best results, shake the Mini Keg (A) well after each cartridge and daily before dispensing the
rst pour of the day.
• Nitrogen (N2) or Nitrous Oxide (N20) cartridges can be found at many local supermarkets, cooking
stores and are readily available on Amazon and other online retailers.
• Nitrous oxide (N2O) and Nitrogen (N2) is bacteriostatic which means that it inhibits bacterial growth, so
most beverages will typically stay fresh in the refrigerator for up to 10 days.
• A delicious Nitro Cold Brew starts with a good tasting Cold Brew that is neither weak nor concentrated.
• Besides cold brew coffee, the Vinci Nitro Cold Brew Mini Keg (A) can be used to infuse cocktails,
lemonade, tea, fruit-infused waters, juice, or virtually any of your favorite cold beverages! The only
beverages not recommend are already carbonated or beverages that contain small particles or pulp.
TIPS FOR USE AND CARE:
8. Soak the Pick Up Hose (G) in hot soapy water for
a few minutes and rinse with clean water.
6. Rinse openings of the Spear (B) with hot water
and let it air dry.
7. Rinse all openings of the Stout Faucet (F) with
hot water and use the Small Faucet Brush (K) to
clean the spout tip of the faucet.
5. Remove the solution from the Mini Keg (A) and
gently scrub the inside of the Mini Keg (A) with
the Large Keg Brush (J). After the inside has been
scrubbed, repeat step 1 in the “How to Clean”
section on page 8.

www.vincihousewares.com | 888.735.3621 | [e-mail]
REINVENTING BEVERAGE
F/N:v6