VIRUSKILLER VK-blue User manual

!"#$%&'()%*+,&-*#&./(#*$*0)/*"+&)+%&
12#*3*4)/*"+&562*78(+/&
9:;<$2(&
&
&
=.5>&?=@A5&B&@C.D>=ED@FC.&
Sales & Design: Radic8 Ltd
Man & Scythe Building 6 - 8 Churchgate Bolton, BL1 1HL, UK
Tel : [phone], E-mail: [e-mail],
www.radic8.com
Manufacturer: INBair Co., Ltd
3F, 15, Beotkkot-ro 12-gil,Geumcheon-gu, Seoul, Korea
Tel: [phone], E-mail: [e-mail],
www.inbair.com
Made in Korea, Designed in England

Table of Contents
Safety Instructions………………………………………1
Operation Instructions…………………………………..4
Key Parts and Components……………………………5
VirusKiller Functions…………………………………….6
Cleaning and Maintenance………..………………….15
Error Messages………………………………………..18
Troubleshooting………………………………………..19
Customer Service……………………………………...21
Specifications………………………………………….22
Limited Warranty Card
Important Safety Instructions
The following instructions are provided to ensure your
safety and to protect the unit from accidental damage.
• Read these instructions – All the safety and
operating instructions should be read before
this product is operated.
• Keep these instructions – The safety and
operating instructions should be retained for
future reference.
• Heed all warnings – All warnings on the
appliance and in the operating instructions
should be adhered to.
• Follow all instructions – All instructions for
use and operation should be followed.
• Warranty – included inside.
1 of 20
Warning – This symbol indicates important
safety instructions that must be followed to avoid
injury.
Caution – This symbol is to bring important
information to your attention to avoid the risk of injury
or damage to the unit.
Prohibited – This symbol indicates a forbidden
action. Adhere to these to reduce the risk of injury or
damage to the unit.
Electrical Safety
• The unit should only be connected to a properly
grounded mains power supply with voltage that
matches that specified.
• To prevent overload, do not
share the same power supply
socket with too many other
electronic components.
• Do not place the power cord
where it could be stepped on
or tripped over.
• Do not place heavy items on
the power cord, they could
damage the wire.
• Do not allow water or moisture to enter the unit or
power adapter.
• Do not use in wet, moist areas
such as bathrooms, steamy
kitchens or near swimming
pools.
• Pull the plug out immediately and seek professional
help if the plug or power cord is damaged, liquid is
spilled onto the unit, if it is accidentally exposed to
moisture or the unit is not working normally.
2 of 20

Operation Safety
• Keep the product away from flammable gases and
liquids, candles and open
flames.
• Do not install near any heat
sources such as radiators,
stoves, or other apparatus that
produce heat.
• Do not attempt to repair or
replace any part of this
equipment unless it is
specifically recommended in
the user guide. All other
services should be referred to a
qualified technician.
• Make sure the power cord is plugged
firmly and completely into the outlet.
• Hold the main plug, not the wires,
when removing from a socket.
• During a thunderstorm switch off the unit and
unplug from the socket.
• Do not handle the unit with wet hands.
• Only clean with a soft, dry cloth. Do not use solvents
or petroleum based fluids.
• Do not place heavy objects on the unit.
• Do not shake, knock or move the product while in
operation, you may damage the internal circuits.
• If a strange smell, noise, or smoke is
emitted, turn off immediately and contact
customer services.
3 of 20
Operation Instructions
• Switch off while cleaning the room
After cleaning, it is important to
properly ventilate the room
before using VirusKiller again.
• Switch off while cooking
Oils released while cooking may
reduce the lifespan of the
sterilizing module. After cooking,
the room should be ventilated to
remove oils. VirusKiller can then
be used to remove the remaining smell.
• Ensure airflow is not restricted
Do not position VirusKiller so
that airflow to and from the unit
is restricted by large items
such as furniture, electronic
items or curtains.
• Position at least 3 metres from the bed
To avoid excessive cooling
caused from sleeping in direct
airflow, we recommend
positioning VirusKiller at least 3
metres away from the bed.
• Maintain proper ventilation – 30 minutes per day
VirusKIller is designed to purify
and sterilize your indoor air, and
will do this very effectively if used
correctly. Good indoor air quality
also requires proper ventilation.
We recommend opening
windows or doors, or operating A/C units, for at least
30 minutes a day.
• Maintain regular servicing and maintenance
4 of 20

Caution
• The appliance is not to be used by children or
persons with reduced physical, sensory or mental
capabilities. This appliance is not a toy. Children
should be supervised at all times.
• Never look directly at a burning ultra-violet light
– this may permanently damage your eyes.
Switch off and unplug before performing
maintenance.
Key Parts and Components
1. Air Inflow
2. Santized and Purified Air Outflow
3. Fan
4. Dual Reactor Module (Left and Right)
5. 8 x UVC Lamps and Multiple Nano Tube Filters
6. Fragrance Pod
7. Pre Filter
8. HEPA Filter
9. Carbon Filter (Left and Right)
5 of 20
Wall Mounting
The Reactor Module
6 of 20

Control Panel and Display
Remote Control
7 of 20
VirusKiller Functions
Manual Operation Mode
When the power button is pressed, the unit emits a
beep sounds and begins to operate. If the product
does not operate, ensure the socket is plugged
securely into a live, properly grounded outlet of the
correct voltage.
8 of 20

· Increasing the Fan Speed
·Fan speed increases when the UP button is
pressed.
FAN 1 Quiet Mode
FAN 2 Normal Mode
FAN 3 High Speed Mode
9 of 20
·Reducing the Fan Speed
·Pressing the DOWN button decreases the
fan speed.
FAN 1 Quiet Mode
FAN 2 Normal Mode
FAN 3 High Speed Mode
10 of 20

Operating the LED Lamp
11 of 20
Setting the Timer
1. Press TIMER button on the remote
controller.
2. Press MODE button on main body.
Press either TIMER or MODE to toggle between the
timer preset options. The unit will automatically
switch off when the programme time has passed.
·
Pr - 3 3 hours preset
Pr - 6 6 hours preset
Pr - 9 9 hours preset
12 of 20

Mode Indicator
Repeatedly pressing the MODE button on either
the unit or the remote control changes the display
in the following order:
0001 Operation time (in hours) of
Sterilizing Module
_27d Current temperature
FAN3 Fan Speed
13 of 20
To Switch the Unit Off
To switch the unit off, press the POWER button
on the unit or on the remote control.
Turn the product off and unplug power cord when
it is not in use for an extended period of time.
14 of 20

Cleaning and Maintenance
Cleaning the Pre-Filter
The plastic pre-filter is reusable. To clean it follow this
procedure:
1. Open front cover G.
2. Remove pre-filter case from unit H and
separate from HEPA filter I.
3. Clean the pre-filter with plain water.
4. Allow to dry completely out of direct sunlight.
5. Replace
Ensure you have removed the HEPA filter
before washing the pre-filter
We recommend you check the pre-filter regularly and
clean it as often as necessary, depending on the levels
of pollution.
15 of 20
Replacing the HEPA Filter
When the display shows ‘FILT’ at 2 minute intervals, it
is time to replace the HEPA filter (2000 hours). After
replacing the HEPA filter I, press and hold the UP
switch J for at least 14 seconds to reset the HEPA
timer to zero.
Changing the Side Carbon Filters
After switching off the power, open side filter door K
and replace carbon filter L, then close the door.
The HEPA and carbon filters are not reusable and
should be replaced.
Depending on the levels of pollution the lifetime of the
HEPA may be longer or shorter than the recommended
2000 hours use time.
Please contact your local customer service center or
distributor to purchase replacement HEPA and carbon
filters.
16 of 20

Changing the Fragrance Filter
The fragrance pod can be used to distribute a
pleasant aroma throughout the room.
Open the white lid on the fragrance pod and place a
Radic8 fragrance filter pad into the pod.
Fragrance Pod
17 of 20
Error Messages
When to Replace the Sterilizing Module
The lifespan of the Sterilizing Module is 8000 hours.
When the unit has been operated for 8000 hours, the
operation time (displayed by pressing MODE) will be a
minus figure, as shown below.
The Sterilizing Module should be replaced when
recommended, otherwise the sterilizing power and the
lifespan of the unit will be reduced.
Circuit overheat error
The below error message is displayed when the circuit
is overheated.
Switch off the unit and contact the customer service
center.
Door Open
If the door is open the unit will not switch on. It will emit
3 rapid descending beeps. Check the magnet
connections in the door are properly aligned with those
on the body.
18 of 20