VISA IT-9300 User manual

1
OPERATING INSTRUCTIONS
FOR PREPROGRAMMED REMOTE
CONTROLS BY BRAND
IT-9300
BRANDS OFTHE FINLUX - ITT/NOKIA/SCHAUB LORENZ -
LUXOR - OCEANIC - SALORA GROUP
DESCRIPTION
1. LED indicator.
2. Access to “secondary functions”.
3. Access to Teletext functions
(only on some models).
4. Switch key to access additional
memory for copying functions
by the learning procedure.
5. Main functions and code entry keys.
6. TV: On/Off or access to the
automatic Device-Code search.
7. VCR: Play or access to the
automatic Device-Code search.
8. Internal RESET key
(to be used only in the specified cases).
9. Key to initialize programming,
search or code visualising
procedures.
Fig. 1
RAPID SET-UP
HOW TO MAKE YOUR REMOTE CONTROL FUNCTION IMMEDIATELY
OPEN THE BATTERY COVER AND INSERT 2 NEW ALKALINE BATTERIES, TYPE AAA/LR03 1,5V AND
CLOSE THE BATTERY COVER.
• SWITCH THE TELEVISION SET ON.
• OPEN THE FRONT COVER OF THE REMOTE CONTROL, PRESS AND RELEASE THE «CODE» KEY AND ENTER
• POINT THE REMOTE CONTROL TOWARDS THE TV SET.
• PRESS AND KEEP PRESSED THE ON/OFF KEY.
• RELEASE IMMEDIATELY THE ON/OFF KEY ONCE THE TV SWITCHES OFF.
•
CHECK THAT THE REMOTE CONTROL OPERATES THE MAIN FUNCTIONS.
• IN THIS CASE
• THE UNIT IS READY.
• OTHERWISE REPEAT AGAIN PROCEDURE.
TO KNOW MORE…
TO MAKE THE BEST USE OF YOUR NEW REMOTE CONTROL WE RECOMMEND THAT YOU READ IN FULL AND
RETAIN THESE INSTRUCTIONS
N.E. IT 9300 (GB) 13-07-2000 12:47 Pagina 1

MAIN FEATURES:
The new remote control you are about to use
is preprogrammed to replace almost all of the
original TV remote controls of this brand (or
group of brands) and, in their basic functions,
most brands ofVCR remote controls.
- It fully replaces the original TV remote con-
trol, including the teletext/fastext (if available
on the original).
- It operates simultaneously aTV and aVCR
with no additional operation required once
the respective codes have been inserted.
- The buttons are identified by the symbols of
the original remote control
- It can learn up to 19 additional functions from
another remote control (TV,VCR,SAT,etc.)
- Its use is further facilitated by the LED indi-
cator (➀Fig.1) which emits a short flash,
every time a button is pressed to transmit a
command,or a series of flashes,when perfor-
ming operations as described below.
PRELIMINARY OPERATIONS
To set the remote control to operate yourTV
and/orVCR it is necessary to perform the
simple operations as described in the attached
instructions,which we recommend you read
in full and keep for future reference.
Open the battery cover and insert two 1.5V
mini batteries of the type LR03 (AAA) obser-
ving the polarity as indicated.
Close the battery cover and proceed on setting
up your remote control.
N.B.: Open the front cover of your remote
control to access other functions.
1) HOW TO PROGRAM
THE REMOTE
CONTROL FOR TVs
If you know the model of the original remote
control, please read paragraph “1.1” here
below:TV,manual programming;if not,go
to paragraph “1.2”:TV, automatic search
and programming.
1.1)TV, MANUAL
PROGRAMMING
1.1.A) Look for the brand and the model of
the original remote control in table B,
page 4-5, and make a note of the code
that corresponds to it. (If you do not
find this match,go to paragraph“1.2”:
TV, automatic search and pro-
gramming).
1.1.B) Press and release the « » but-
ton (➈Fig. 1) and immediately watch
the LED, which will signal a short flash.
1.1.C) Enter the code using the numeric but-
tons (see group ➄Fig.1) and immedia-
tely watch the LED.
If the LED emits two short flashes (OK) the
remote control is ready. (See also paragraph
“1.3”: Secondary Functions). If the LED emits
one long flash (error) you will need to repeat
the procedure.
1.2) TV, AUTOMATIC SEARCH
AND PROGRAMMING
1.2.A) Switch the TV on, on any channel, and
point the remote control towards the
set.
1.2.B) Press and release the « » but-
ton (➈Fig. 1) then press and keep
pressed the OFF button « » (➅ Fig.
1),releasing it immediately the set
switches off.
(During the “search” phase, the LED
will emit a series of flashes).
1.2.C) Using the remote control, switch the
set on again (by pressing the OFF but-
ton « » or one of the numeric but-
tons,depending on the model).
1.2.D) Check that all other buttons are func-
tioning correctly. (See also paragraph
“1.3”:“Secondary functions”).
IF EVERYTHING IS OK! YOUR REMOTE CON-
TROL IS READY.
We advise you make a note of the code fol-
lowing the instructions in paragraph “3”:
Displaying the code.
If the buttons do not perform correctly,repeat
the search procedure.If the set does not swit-
ch off within 5minutes from the start of the
search, go to paragraph “5”: “What to do
if…”
1.3) SECONDARY FUNCTIONS
For maximum simplicity, the number of but-
tons on your remote control has been limited
to functions of most frequent use.
The commands less frequently used, are
represented by the orange coloured symbols
on the face of the remote or pictured on the
appropriate diagram in this manual (Fig. 2, Fig.
3pag.8).
N.B. Secondary functions are available only if
present in the original remote control.
1.3.A) To transmit the required command,
press and hold down the « » button
(➁Fig. 1) while simultaneously
pressing the button identified for
that function.
2) HOW TO PROGRAM
THE REMOTE
CONTROL FOR VIDEO
RECORDERS
2.1) IFYOU KNOWTHE BRAND
OFTHEVIDEO RECORDER…
N.B. The main functions of the video recor-
der, once the remote control has been pro-
grammed, are accessed by simply pressing the
specific buttons.
2.1.A) Look at table C page 6-7 relating to
SHIFT
CODE
?
CODE
?
2
N.E. IT 9300 (GB) 13-07-2000 12:47 Pagina 2

3
brands and codes for video recorders.
Next to the required brand are listed
one or more codes that have to be
inserted, in the same way as described
for TVs from para.“1.1.B”, one at the
time, in turn, until the one that opera-
tes your VCR correctly is found. (See
also Note 1at the end of para.“2.2”).
Should you not be able to find the correct
code for the required brand, or the brand is
not listed,go to the next paragraph.
2.2)VCRs,AUTOMATIC SEARCH
AND PROGRAMMING
2.2.A) Insert a video cassette,preferably blank,
and set the video recorder on STAND
BY.
2.2.B) Point the remote control towards your
VCR.
2.2.C) Press and release the « », but-
ton and then press and keep pressed
the « » (PLAY), button (➆ Fig. 1),
Release the button as soon as the tape
starts advancing. (During the search
phase the LED will emit a series of
short flashes).
2.2.D) Stop the tape and check the workings of
the other buttons (See also Note 1).
IF EVERYTHING IS OK!THE REMOTE CONTROL
IS READY.
We advise you make a note of the code just
memorized following the instructions in para.
“3”:Displaying the code.
If some commands do not correspond,repeat
the search procedure. If the tape does not
start advancing within 5minutes of commen-
cing the search, see para.“5”: “What to do
if…”.
NOTE 1:the RECORD function is accessed by
pressing simultaneously the «SHIFT» and «●»
(orange symbol) buttons.
The OFF or STAND BY functions are acces-
sed by pressing simultaneously the «SHIFT»
and « » (orange symbol) buttons.
3) DISPLAYING THE
CURRENT CODE
Premise:
• Each code is composed of 4digits.
•The LED indicates each digit as the sum of a
series of short flashes, except for the zero
that is represented by one long flash.
• The LED pauses for approx. 2seconds in
between each digit.
3.1) Press and keep pressed the «SHIFT» but-
ton.
3.2) Press the « » button.
3.3) Release both buttons (« » and
«SHIFT»).
3.4) Press and release the « » (OFF) button
for TV or « » (PLAY) for video recor-
ders.
Watch the LED which,after a short flash when
pressing the button, will indicate the code as
described in the premise.
4) LEARNING
FUNCTION
General
IT-9300 can learn from the majority of remo-
te controls on the market (TV,VCR, SAT, etc.)
up to a maximum of 19 functions.The com-
mands can be memorized on two memory
banks,selected by using the «LEARN»,button,
using all buttons except «SHIFT»,« »,
«VT» and «LEARN».
NOTE: the «LEARN» button, to select the
second memory bank, is used when wanting
to learn functions that are additional to those
already in use and all the buttons are full. It is
not necessary to select the second memory
bank if you want to replace commands on but-
tons that are not in use.
A learned command automatically replaces
any pre-existing preprogrammed command. If
you make a mistake and forget to select the
second memory bank , the original pre-pro-
grammed command can be restored by simply
cancelling the learned command.
In all cases, it is necessary to cancel a learned
command before it can be replaced.
When toggling between memory banks, by
pressing «LEARN», the LED flashes once or
twice,to indicate which one is active,or not at
all if the second is empty.
4.1) Learning procedure.
a) Place the two remote controls on a level
surface as shown in the figure below.
b) Press and realease the « » button
and enter the code «5555».Wait for the
LED to emit 5 short flashes and then…
c) If necessary, select the memory bank by
pressing the «LEARN» button (See Note
above).
d) Press the button of the IT-9300 on which
you wish to learn,watch the LED which ini-
tially will stay on and within 5seconds…
e) Press and keep pressed the button of the
original remote control to be learned,
releasing it when the LED goes off (two
short flashes shortly after will confirm
memorization).
f) To memorize more commands repeat the
procedure from d).
N.B.:
• If the LED emits two long flashes there has
been a problem and you have to repeat the
procedure from d).
CODE
?
CODE
?
CODE
?
CODE
?
CODE
?
Visa IT-9300 Original
3~ 5cm.
N.E. IT 9300 (GB) 13-07-2000 12:48 Pagina 3

• Exit from the learning function is automatic
after approx.8seconds of the last operation
(or its interruption) and is signaled by a long
flash of the LED.To enter the learning func-
tion again repeat from b).
• To learn a new command on a button that
has already been memorized it is necessary
to first clear the memory (4.2)
4.2) Cancellation procedures.
Cancellation procedures are used when wan-
ting to replace a learned command with
another learned command or restore a pre-
programmed command (See NOTE above).
4.2.A) Cancellation of only one button.
a) Press and release the « » button.
b) Enter the code «6 6 6 6».
c) Press the button to be cleared and watch
the LED that will confirm cancellation with
2 short flashes.
d)To cancel more commands repeat from a).
N.B.:Exit from cancellation mode is automatic
after approx. 8seconds of the last operation.
4.2.B)Total cancellation (on all buttons of both
memory banks).
a) Press and release the « » button.
b) Enter the code «7 7 7 7» and watch the
LED that will confirm cancellation with two
short flashes.
5) “WHAT TO DO IF…”
- After the batteries have been inserted, the
LED will not flash when pressing the
« » button?
Check that the batteries have been inserted with
correct polarity.
-The automatic search was unsuccessful?
Repeat the operation and observe the
LED
After a while you will notice that the LED emits
5 short flashes indicating the end of a search
cycle. Keep the search button pressed…if
your machine still does not respond and the LED
again emits 5 short flashes,abandon this proce-
dure and try inserting manually, one by
one, following the procedures in the pre-
vious chapters, all the codes listed in the
tables (Tab.A forTVs,Tab. C.forVCRs).
- You have some difficulties with the learning
function?
Try repositioning the two remote controls chan-
ging the distance and/or alignment.
- After a while the operation of the remote
control becomes erratic?
Make a note of the codes memorized (see also
para.
3 ) and quickly change the batteries. If no
change,press (for example with the tip of a pen-
cil or non sharp object) the internal reset button.
Take notice: after pressing the RESET but-
ton it is necessary to enter again all the
required codes.
CODE
?
CODE
?
CODE
?
4
TAB. B
ORIGINAL FINLUX MODELS
RC 300 - RC 3000 - RC 3001 - RC 3002 - RC 3008 - RC 3010 - RC 3011 - RC 322 - RC 323 - RC352 - RC 355 - 1003
RC 360 - RC 370 - SKYMASTER II - TC300
68200 1004
56770 1007
RC 1000 - RC 1002 1010
21 S 38 - 25 S 24 - 25 S 38 - 28 S 24 - RC 400 - RC 500 - RC 501 - RC 502 - RC 510 - RC 513 - RC 523 - RC 550 1013
TC 240 1016
INFR.REM.CONTR. 1017
RC 9000 - RD 9000 1018
400126 - 460201 1023
INFR.REM.CONTR. 1026
400111 1028
RC 571 1039
CODE
FINLUX
1003 - 1004
1007 - 1010
1013 - 1016
1017 - 1018
1023 - 1026
1028 - 1039
TAB. A: CODES OF TV
ITT/NOKIA/S. LORENZ
1001 - 1002 - 1004
1005 - 1006 - 1007
1008 - 1012 - 1013
1015 - 1020 - 1021
1024 - 1029 - 1031
1039
LUXOR
1001 - 1002
1004 - 1005
1007 - 1009
1011 - 1013
1019 - 1022
1027
OCEANIC
1001 - 1002
1004 - 1005
1006 - 1007
1011 - 1012
1014 - 1027
1039
SALORA
1001 - 1002
1004 - 1005
1006 - 1009
1011 - 1012
1013 - 1020
1030 - 1031
1039
N.E. IT 9300 (GB) 13-07-2000 12:48 Pagina 4

5
TAB. B
ORIGINAL ITT/NOKIA/SCHAUB LORENZ MODELS
C1 - C11 - C2 - C3 - C4 - CM 1 - CT 3325 - CT 3835 - D1 - D2 - E1 - E2 - FS 5 - FS 7 - FS 9 - FS 10 - FS 11 - FS 4 1001
FS D - IFB 296 B - IFB VS5 - IL 1 S - IL 1 SK - IRC 1 - IRC 2 - IRM 1 - IRS 1 - IRS 2 - IRS 3 - PRC 54 - PRC 57 -
RC 4818 - VS 4 - VS 5
INFR.REM.CONTR. 1002
EM 1 - EM 2/B - ES 3 B - ES 5 - LM 1/E - LN 2/S - RC 2061 - RC 2261 - RC 803 - SLM 1 - SM1 - SM2 - ST1 1004
RC 710 - S02 - S03 - USO 283 1005
CT 3326 - FS 5/2T - IFB 620 - VFS 4 - VSF 4 M 1006
FS 1 - FS 2 - FS 3 - IFB 13 - IFB 14 - IFB 15 - IFB 16 - IFB 18 - IFB VS1 - RG 350 - RG 351 - RG 353 - TX 2512 - 1007
TX 2612 - TX 2712 - VS 1 - VS 3
RC 700/A - S01 1008
ES 1KD - IRN 3 - MOUSE REM.CONTROL 1012
RC 552 1013
SL 321 - SL 414 - SL 615 1015
CP 3228 - IRM FX - IRS FASTEXT - IRS FLOF - IRS FX - RG 100 - RG 200 - RG 303 - RG 305 - RG 306 - RG 307 1020
LOGICOMPUTER 56/100 1021
DIGICOMPUTER 33 KEYS / 44 KEYS 1024
SL 214 - SL 421 1029
RCN 600 - RCN 602 - RCN 610 - RCN 620 1031
RC 571 1039
CODE
ORIGINAL LUXOR MODELS
IL 1 S - IL 1 SK - IRS 1 - RC 4811 - RC 4818 1001
33 KEYS - CHASSIS KI - CHASSIS MI 1002
ES3B-ES5-ES5/1 - LM1/E - LN 2/S - RC 530 - RC 531 - SM 2 - ST 1 - ST2 1004
5652 2194 - S03 5662 2088 - US0 0383 1005
190 9593 15 - 190 9596 15 - 190 9596 60 - IR2 1007
210 1001 10 1009
210 1005 11 - 210 1010 11 - 215 1005 - 215 1005 11 - 215 1009 - 215 1010 - 600 000 1011
RC 530/I 1013
105520 B 1019
105053 A 1022
RC 3 - RC 3 TXT 1027
CODE
ORIGINAL OCEANIC MODELS
CM 1 - IRS 1 - IRS 3 - TC 16 C - TC 30 C - TC 30 D - TC 30 E - TC 569 100 1001
P0 41 52200 - P0 42 05200 1002
EM 1 - EM 2/B 1004
S02 1005
TC 100 B - TC 52 A - TC 52 C 1006
1450 E - TC 16 A - TC 16 B - TC 416 000 - VS1 1007
P0 41 52600 - TC 1R 1011
ES 1KD - ES 2 - IRN 3 - RC MOUSE 1012
TC 230 - TC 339 B - TC 339 C 1014
TC 100 A - TC 40 A - TD 40 A - TD 40 D 1027
TC 239 B 1039
CODE
ORIGINAL SALORA MODELS
C 1 - C 2 - C 3 - C 4 - D 1 - D 2 - E 1 - E 2 - IRS 1 - IRS 3 1001
1 G/PALL - B 55 120 - B 55 402 - CT RM 200 M - IR 16 FACH - K 80 - M 90 - SERIE G - G - SERIE H - SERIE J 1002
SERIE K - SERIE KI - SERIE M - SERIE MI - UA 502 G
EM 2 - ES 3/B - ES 5 - RC 531 - 531 - S 2 VT - SERIE N - SM 1 - SM 2 - ST 1 - T 5 C 1004
5652 2088 - S03 - USO 383 1005
5652 1350 1006
SERIE T 1009
215100921 - 661 202 A - 86 183 - 986 70 D 1011
STUL 69 1012
RC 531/I 1013
5652 1312 1020
6055011 1030
RCN 601 1031
RC 571 1039
CODE
ORIGINAL EST EUROPE MODELS
ALCUNI MODELLI / SOME MODELS 1025
ALCUNI MODELLI / SOME MODELS 1033
ALCUNI MODELLI / SOME MODELS 1034
ALCUNI MODELLI / SOME MODELS 1035
ALCUNI MODELLI / SOME MODELS 1036
ALCUNI MODELLI / SOME MODELS 1037
CODE
N.E. IT 9300 (GB) 13-07-2000 12:48 Pagina 5

6
TAB. C - BRANDS AND CODES OF THE VIDEO RECORDERS
ACCENT 2027
ADMIRAL 2020
ADYSON 2021
AIM 2041
AIOSTAY 2054
AIWA 2031 2037 2054
AKAI 2009 2010 2013 2022
2029 2032 2033 2040
AKASHI 2027
ALBA 2021
AMSTRAD 2054
ANGLO 2054
ANITECH 2021 2080
APHEL SOUND 2054
ASA 2017 2054 2080
ASTRA 2054
ASUKA 2017
ATLANTIC 2017 2020
AUDIO DYNAMIC 2025
AUDIOSONIC 2017 2021 2027
AUTHENTIC 2013
AUTOVOX 2017 2080
AWA 2040
AWATRON 2054
BAIRD 2013
BANG & OLUFSEN 2013 2080
BAUER - BOSCH 2009 2012 2080
BEAULIEU 2080
BLAUPUNKT 2009 2010 2012 2053
2074
BLUESTAR 2021
BONDSTEC 2021 2027
BRANDT>>THOMSON
BRAUN 2053
BRIONVEGA 2004 2013 2020
BRUNS 2021 2027
BUSH 2021 2027
C G E 2013 2020 2054
CANON 2012 2053
CASIO 2054
CGM 2020
CIE 2028
CIMLINE 2027
CITIZEN 2017
CONDOR 2020
CONT. EDISON 2004 2013
CORVUS 2054
CROWN 2027 2054
DAEWOO 2016
DANSAI 2027
DE GRAAF 2020 2043 2054 2080
DECCA 2013 2054 2080
DEMA COLOR 2020
DOMOH 2017
DUAL 2013 2054 2080
DUMONT 2020 2054 2080
DYNATECH 2054
EDAN LINE 2020
EDISON 2027
ELBE 2017 2020 2025 2054
ELTA 2021 2027 2054
EMERSON 2017 2020 2054
ESSELTE 2027 2054
EUMIG 2020
EXCEL 2020
FAIR VIDEO 2017
FAIRCHILD 2043
FENNER 2027
FIDELITY 2005 2027 2054
FINLANDIA 2020 2080
FINLUX 2001 2017 2020 2043
2053 2054 2080
FIRST LINE 2017 2027 2054
FISHER 2020
FORMENTI 2001 2017 2020 2080
FUJITSU 2054
FUNAI 2027 2054
GBC 2001 2027
GE 2013
GEC 2004 2027 2080
GELOSO 2001 2021 2027
GENERAL TECHNIC 2012 2021 2027 2054
GOLDHAND 2021 2027
GOLDMEDAL 2027 2054
GOLDSTAR 2017 2025 2054
GOODMANS 2027 2054
GR 15 2027
GRANADA 2004 2013 2020 2053
2080
GRANDIN 2017 2027
GRUNDING 2009 2010 2012
HANSEATIC 2009 2017 2025 2027
2080
HANTAREX 2017
HARMAN/KARDON 2025
HCM 2027
HINARI 2021 2027
HITACHI 2004 2013 2018 2019
2043 2054
HMV 2013
HYPER 2027
IMPERIAL 2020 2030 2054
INNO HIT 2027 2030
INTERBUY 2027
INTERVIDEO 2017 2054
INTERVISION 2021 2025 2027 2054
IRRADIO 2017 2020 2027 2080
ITT/NOKIA 2004 2005 2013 2020
2030 2040 2081
JASON 2017
JVC 2013 2067 2069 2070
2071 2072
K-MART 2017
KAISUI 2027
KAMBROOK 2054
KANSAI 2021 2027 2054
KENDO 2028
KENWOOD 2013 2020 2025
KIC 2054
KOENIG 2001 2030
KOERTING 2080
KRONNE 2025
KTV 2017
KUBA ELECTRONIC 2009 2013 2017 2020
2053 2054
KUNYA 2013
LAVIS 2027
LENCO 2027
LENOIR 2017 2020
LEYCO 2027 2055
LLOYD 2004 2054
LLOYD’S 2013
LOEWE OPTA 2012 2017 2080
LOGIK 2040
LUXON 2027 2054
LUXOR 2004 2014 2020
M ELECTRONIC 2017 2021 2025 2027
2054 2080
MAGNADYNE 2001 2004 2013 2017
2020
MAGNASONIC 2020
MANESTH 2027 2054
MARANTZ 2012 2017 2080
MARQUANT 2021
MARTA 2017
MATSUI 2004 2028
MAXAM 2027
MAXELL 2027
MAXIMAL 2020
MEMOREX 2017 2020 2054
MERCURY 2017
METZ 2009 2010 2011 2012
MINERVA>>GRUNDING
MINOLTA 2013 2018 2043
MITSUBISHI 2010 2014 2051
MONEXE 2054
MTC 2054
MULTITECH 2027 2027 2054 2080
MURPHY 2054
NAKAMURA 2054
NEC 2013 2013
NECKERMANN 2004 2012 2013 2020
2030 2043 2080
NECOLA 2017
NEI 2080
NESCO 2054
NIKKAI 2017
NOKIA >>ITT/NOKIA
NORDMENDE 2001 2004 2005 2013
2057 2058 2059 2060
2067
OCEANIC 2004 2006 2020 2022
2081
OKANO 2027
OLYMPUS 2053
OMEGA 2054
ORION 2028 2034 2035 2037
2054 2055 2081
OSAKI 2017 2027 2054
OSIO 2017
OTTO VERSAND 2001 2009 2010 2025
2080
PALLADIUM 2004 2012 2013 2020
2025 2043 2054 2080
PALSONIC 2017 2054
PANASONIC 2004 2052 2053 2057
2074
PANORAMA 2017
PATHE CINEMA 2012
PATHE MAR.>>THOMSON
PCM 2017
PENTAX 2043
PERDIO 2054
PHILCO 2013 2020 2025 2054
PHILIPS 2006 2012 2076 2077
2080 2083
PHONOLA>>PHILIPS
PILOT 2017
PIONEER 2013 2038 2039 2043
2080 2083
PLAYSONIC 2020
PORTLAND 2017
PROFEX 2021
PROLINE 2027 2054 2080
PROSCO 2017 2054
PYE>PHILIPS
QUELLE>UNIVERSUM
QUALCRAFT 2040 2054
QUARTZ 2020
QUASAR 2017
RADIALVA 2017
RADIONETTE 2004 2017
RANK ARENA 2013
REALISTIC 2017 2020 2053 2054
REX>SELECO
RFT 2021 2027
ROADSTAR 2017 2027 2054
ROYAL 2027
SABA 2004 2013 2057 2060
2062 2067 2069
SAISHO 2054
SALORA 2005 2014 2020 2051
2080
SAMBERS 2017 2054
SAMSUNG 2020 2030 2040 2042
SANSUI 2013 2027
SANYO 2006 2020 2026
SAVEMA 2017
SCHAUB L.(ITT) 2004 2017 2020
SCHNEIDER 2017 2027 2030 2043
2054 2080
SCOTT 2017 2020
SEG 2021 2027 2030 2054
SELECO 2004 2013 2080
SENTRA 2017 2027 2040
SETRON 2027
SHARP 2006 2007 2017 2054
SHINKO 2027 2054
SHINTOM 2027 2054
SIEMENS 2009 2010 2012 2020
N.E. IT 9300 (GB) 13-07-2000 12:49 Pagina 6

7
TAB. C - BRANDS AND CODES OF THE VIDEO RECORDERS
SILVA 2017
SILVER 2020
SIMKO 2054
SINGER 2020 2023 2030
SINUDYNE 2028 2037 2080
SONAMEC 2054
SONITRON 2017
SONOKO 2020
SONY 2015 2023 2044 2044
2045 2046
SPECIAL 2017
STARLITE 2017
STERN>SELECO
STRONG 2027 2054
STZ 2054
SUNSTAR 2054
SUPERTEC 2054
SUPRA 2017 2027 2040 2054
SYLVANIA 2054
SYMPHONIC 2054
TANDY 2017 2027 2054 2080
TATUNG 2013 2054 2080
TEAK 2013 2054
TEC 2020 2027 2054
TECHLINE 2027
TECHNICS 2052 2053 2074
TEDELEX 2025 2028
TEF 2013
TEKNIKA 2017 2054
TELEAVIA>>THOMSON
TELEFUNKEN 2013 2058 2059 2060
2062 2063 2067
TELERENT 2013 2053 2054
TELESTAR 2027 2040
TELETECH 2027
TELEVIDEON 2001 2020
TEMPEST 2040
TENOSAL 2027
TENSAI 2017 2021 2027 2054
THOMSON 2013 2058 2059 2060
2062 2063 2067
THORN 2004 2005 2010 2013
2056 2077
TOKAI 2017 2027
TOSHIBA 2013 2023 2024 2036
TOTEVISION 2017
TOWADA 2021 2027
TRANSONIC 2032
TTR 2013
UHER 2013 2030 2043
ULTRAVOX 2001 2004 2020
UNIC RADIO 2027 2054
UNIVERSUM 2004 2009 2010 2012
2013 2017 2020 2027
2030 2043 2053 2054
2080
URANYA 2004 2017 2020
VECTOR RESEARCH 2025
VICTOR 2013
VIDAR 2020
VIDEO E.CLUB 2020
VIDEO TECHNIK 2027 2054
VIDION 2020
VIDITAL 2004
WELTBLICK 2017
WHITE WESTING 2004 2017 2020
YAMAHA 2013 2025
YOKO 2017 2021 2027 2030
2054
ZANELA 2027 2054
N.E. IT 9300 (GB) 13-07-2000 12:49 Pagina 7

8
GUARANTEE:
We guarantee that this product will be free from defects for a period of one year from the date of purchase.
DATE OF PURCHASE
VISA Electronics S.r.L. - Via S. Cornelia, 11 - 00060 Formello (ROMA)
Varigrafica ALTO LAZIO - Cod. 771394
FINLUX - ITT/NOKIA/SCHAUB LORENZ
LUXOR - OCEANIC - SALORA
SECONDARY FUNCTIONS
Fig. 2 Fig. 3
N.E. IT 9300 (GB) 13-07-2000 12:50 Pagina 8