Vision Controls HVR Tower User manual

HVR Tower
Quick Start Guide
Hardware Setup
1
2
3
4
5
6
7
8
Side Door Latch
Power Switch
AC Power Socket
PS/2 Mouse Port
PS/2 Keyboard
USB Port
RJ-45 Ethernet Port
VGA Monitor Output
9
10
11
12
13
14
15
Analog DVI Monitor Output
Composite Video Output
Remote Input
Camera Connector 1
Camera Connector 2
USB License Key
Camera Dongle
Quick Setup Instructions:
•Connect the power cord to the AC power socket (3)
•Connect the keyboard and mouse to the correct ports (4) (5)
•Connect the ethernet cable if necessary (6)
•Connect the monitor(s) to the corresponding port(s) (8) (9) (10)
•Connect the USB license (14) to a USB port (6)
•Connect the camera dongles to the correct ports (12) (13)
•Connect the camera(s) to the camera dongles (15)
•Make sure the power switch is in the on position I (2)
•Press the toggle power button located on the front of the DVR
•All camera(s) should display on the monitor after booting

HVR
Quick Start Guide
Software Setup
1
2
3
4
5
6
7
Exit the HVR Software
Camera (live display)
Guard: Setup for event detection
Scan: Turn on/off auto scan option
Set: General system setup
Schedule: Scheduled recording setup
Start: Start/Stop services
8
9
10
11
12
13
14
Play: Brings up playback interface
Time: Date and Time
Disk: Shows available space
Views: Change the layout views
PTZ: PTZ controls
Max: Maximizes cameras / hides controls
Min: Minimizes the HVR application