Vision HDIP01_02 User manual

Model No.: HDIP01_02
Operating Instructions
Thanks for purchasing our product.
Please be sure to read this instruction manual
Carefully before using our product.

Introduction
The HDMI-IP Extender allows you to simultaneously send out an HDMI 1.3
Signal (including 1080p video with 5.1 audio) to one or more HDMI video
projectors or LCD Panels and return an IR control Signal to the source using
CAT5/6/7 Cable over a standard Ethernet infrastructure. Can be used to
distribute HD digital content from multiple Sources to up 200 remore
distribute on a LAN by cascading Managed Ethernet switches up to 3 levels,
allowing the display very far away from the 1080p source devices while
sustaining picture & sound quality. Each device is installed using 1 piece of
twisted pair cable. AV signals are transmitted digitally over the CAT5/6/7
cable without any signal loss. Internal JPEG video compression adapts to
available network bandwidth if needed. The integrated Scalar function allows
different input and output resolutions (different displays can be at different
resolutions). The IR TX / RX function can be used to remotely control the
HDMI source device from any receiver location.

Contents
HDMI-IP Extender............................................................................................ 1
Product Overview ............................................................................................ 1
Safety and Notice ............................................................................................ 1
Features........................................................................................................... 1
Package Contents............................................................................................ 3
Specifications................................................................................................... 3
Panel Descriptions........................................................................................... 3
Hardware Installation ....................................................................................... 5
Typical use....................................................................................................... 6
Product Service ............................................................................................... 7
●Maintenance ................................................................................................. 7
●Provided Service .......................................................................................... 7
●Mail-In Service.............................................................................................. 8
●Warranty ....................................................................................................... 8
●Warranty Limits And Exclusions.................................................................... 9

Page 1
HDMI-IP Extender
■Product Overview ( Model Number: HDIP01_020 )
■Safety and Notice
The HDMI extender has been tested for conformance to safety regulations
and requirements, and has been certified for international use. However, like
all electronic equipments, the HDMI extender should be used with care.
Please read and follow the safety instructions to protect yourself form
possible injury and to minimize the risk of damage to the unit.
}Follow all instructions and warnings marked on this unit.
}Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
}Keep objects that might damage the device and assure that the placement of this unit is
on a stable surface.
}Use only the power adapter and power cords and connection cables designed for this unit.
}Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
■Features
zHDMI 1.3 compliant.
zExtend the transmission distance to at least 100 meters from the sources
at 1080p.
zHDCP compliant.

Page 2
"Notice
Grandbeing Inc. reserves the right to make changes in the hardware,
packaging and any accompanying documentation without prior written notice.
Warning
To reduce the risk of fire, electric shock or product damage:
1. Do not expose this apparatus
to rain, moisture, dripping or
splashing and that no objects
filled with liquids, such as vases,
shall be placed on the apparatus.
6. Clean this apparatus
only with dry cloth.
2. Do not install or place this unit
in a bookcase, built-in cabinet or
in another confined space.
Ensure the unit is well ventilated.
3. To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct
the unit’s ventilation openings
with newspapers, tablecloths,
curtains, and similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
5. Do not place sources of naked
flames, such as lighted candles,
on the unit.
7. Unplug this apparatus
during lightning storms or
when unused for long
periods of time.
8. Protect the power cord
from being walked on or
pinched particularly at
p
lu
g
s.
9. Only use attachments /
accessories specified by
the manufacturer.
10. Refer all servicing to
qualified service
personnel.

Page 3
■Package Contents
1. HDMI transmitting unit
2. HDMI receiving unit
3. 5V 1A power adaptor
4. User manual
■Specifications
Video Bandwidth: 2.25 Gbps (HDMI 1.3)
Input TMDS signal: 1.2 volts (peak-to-peak)
Input DDC signal: 5 volts (peak-to-peak)
HDMI Connector: 19 pin type female connector
Power Supply: 5V 1A
RJ-45 Connector
Dimensions: 13 0x 137 x 30mm (Lx W x H)
Weight: 1.6kg
■Panel Descriptions
Front Panel
→Front View - Transmitting Unit HDoIP01-001
zLink LED: Connect
zData LED: Data transmission
zPower LED: Power on

Page 4
Rear Panel
→Rear View –Transmitting Unit HDoIP01-001
zHDMI IN: Connect a HDMI source with a HDMI M-M cable here
zIR TX: Plug IR Emitter – stick onto the front of the device you want to
control
zETHERNET: Plug in a CAT5/5e/6 cable that needs to be linked to
HDIP01-002
zDC/5V: Connect to 5V DC power supply
Front Panel
→Front View - Receiving Unit HDoIP01-002
zLink LED: Connect
zData LED: Data transmission
zPower LED: Power on

Page 5
Rear Panel
→Rear View –Receiving Unit HDIP01-002
zHDMI OUT: Connect a HDMI display with a HDMI M-M cable here
zIR RX: Plug IR Receiver – picks up the infrared signal from your remote
control just like a TV or VCR
zETHERNET: Plug in a CAT5/5e/6 cable that needs to be linked to
HDIP01-001
zDC/5V: Connect to 5V DC power supply
■Hardware Installation
1. Connect your HDMI source (such as a DVD player) to the transmitting unit
HDIP01-001
2. Connect your HDMI display (such as a plasma TV) to the receiving unit
HDIP01-002
3. Connect your CAT-5/5e/6 cables between the transmitting and receiving
units
4. Make sure your CAT-5/5e/6 cables are tightly connected and not loose
5. Plug in 5V DC power cord to the power jack of HDIP01- 001 and
HDIP01-002

Page 6
■Typical use
①Point-to-point Example
②Point-To-Many Example Over Standard Ethernet LAN
(TX—HDIP01-001, RX—HDIP01-002)

Page 7
③Many-To-Many Home Theater Example Over Managed Ethernet LAN
■Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine
to clean this unit.
■Product Service
●Provided Service
1) Damage Requiring service: The unit should be serviced by qualified
service personnel if:
zThe DC power supply cord or AC adaptor has been damaged;
zObjects or liquids have gotten into the unit;
zThe unit has been exposed to rain;
zThe unit does not operate normally or exhibits a marked change in
performance;

Page 8
zThe unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing to
authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the service uses
parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result
in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the service to perform safety
checks to confirm that the unit is in proper working condition.
●Mail-In Service
When shipping the unit, carefully pack and send it prepaid, adequately insured
and preferably in the original carton. Include a letter detailing the complaint and
provide a daytime phone and/or email address where you can be reached.
If repair is needed during the limited warranty period the purchaser will be
required to furnish a sales receipt/proof of purchase indicating date of
purchase, amount paid and place of purchase. Customer will be charged for
the repair of any unit received without such proof of purchase.
●Warranty
If your product does not work properly because of a defect in materials or
workmanship, Grandbeing Company (referred to as “the warrantor”) will, for
the length of the period indicated as below, （Parts (1) Year，Labor(90)
Days）which starts with the date of original purchase (“Limited Warranty
period”), at its option either (a) repair your product with new or refurbished
parts, or (b) replace it with a new or a refurbished product. The decision to
repair or replace will be made by the warrantor.
During the “Labor” Limited Warranty period there will be no charge for labor.

Page 9
During the “Parts” warranty period, there will be no charge for parts. You must
mail-in your product during the warranty period. This Limited Warranty is
extended only to the original purchaser and only covers product purchased as
new. A purchase receipt or other proof of original purchase date is required for
Limited Warranty service.
●Warranty Limits and Exclusions
1) This Limited Warranty ONLY COVERS failures due to defects in
materials or workmanship, and DOES NOT COVER normal wear and
tear or cosmetic damage. The Limited Warranty ALSO DOES NOT
COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result
from accidents, misuse, abuse, neglect, mishandling, misapplication,
alteration, faulty installation, set-up adjustments, maladjustment of
consumer controls, improper maintenance, power line surge, lightning
damage, modification, or service by anyone other than a Factory Service
Center or other Authorized Service, or damage that is attributable to acts
of God.
2) There are no express warranties except as listed under “limited
warranty coverage”. The warrantor is not liable for incidental or
consequential damages resulting from the use of this product, or
arising out of any breach of this warranty. (As examples, this excludes
damages for lost time, cost of having someone remove or re-install an
installed unit if applicable, travel to and from the service location, loss of
or damage to media or images, data or other recorded content. The items
listed are not exclusive, but are for illustration only.)
3) Parts and service, which are not covered by this limited warranty,
are your responsibility.

Grandbeing Technology Co., Ltd.
Address:
6C, Jialitai Building, No. 6 Yanshan Road,
Nanshan District Shenzhen, P.R. China
Tel: [phone]/Fax: [phone]
Post Code: 518067
www.grandbeing.biz