Visonic MCM-140 User manual

The MCM-140 enhances the ease of use and the control of all
functions of the wireless PowerCode™, PowerMax™, home automation
and security system.
Universal Wireless Remote Commander for PowerMax™
MCM-
In-house wireless remote control of PowerCode™ and PowerMax™ systems
Easy programming and user-friendly control
Visual indications with three color-coded LEDs
Audible signals given in response to specific actions
Back light illumination
Modern, ergonomic design for hand held use or wall mounting, anywhere in
the home or office
WIRELESS
140
®

© VISONIC LTD. 2002 MCM-140 CE2460S0 (REV 05/02)
Choice of operating frequencies to comply with international demand
Different channel for each command
Fully supervised
Long-life 3 V standard lithium battery
Automatic reporting of low battery condition
Wall-mounting bracket included
Compliance with the latest European standards
MCM-140
PowerMax™ Wireless Remote Commander
Visonic’s MCM-140 is the universal wireless
remote control unit for the PowerMax™ home
automation and security control system. It
enables easy programming and control of the
many PowerMax™ functions from anywhere in
the home or office.
MCM-140 functions and commands are activated
in the same manner as on the PowerMax™
keypad for controlling events or X-10 devices
from any room or throughout the facility.
Employing Visonic’s PowerCode™ and Code
Secure™ technologies, the MCM-140 sends
different coded signal (channel) for each
function or command. The MCM-140 can also
be used with other Visonic PowerCode™ wireless
systems.
The keypad’s backlit illumination enables
operation even in the dark. Color-coded LEDs
and audible sounds confirm the user’s command.
Automatic supervision messages are sent
periodically to confirm connectivity.
This compact, ergonomically designed controller
operates at several optional frequencies in
compliance with European and U.S. standards.
It has a 3V long life standard lithium battery
with automatic reporting when the battery
needs to be replaced. The wall-mounted
bracket assures that the remote control unit
is conveniently located where you most often
need it.
SPECIFICATIONS
Transmitted ID Type: PowerCode™ and CodeSecure™
PowerCode™ - Used for Lights 1-7, Light 8 (PGM controlled),
Fire and Emergency functions
CodeSecure™ - Used for Home arming, Away arming,
Disarming, Aux and Panic functions
Operating Frequency (MHz): 315, 433.9, 868.95 and 869.2625
Battery: 3 V standard Lithium battery, CR123A
Back light illumination: Selectable on/off
Dimensions (HxWxD):
127 x 70 x 24 mm (5 x 2-3/4 x 31/32 in.)
Operating Temperatures: 0°-49°C (32°-120°F)
Compliance with Standards: FCC part 15, Industry Canada,
EN 50130-4, 300220-3
WIRELESS
®
Web site: http://www.visonic.com
Head Office (Israel) Tel [phone] Fax [phone]
Visonic Inc. (U.S.A.) Tel [phone] Fax [phone]
Visonic Ltd (U.K.) Tel [phone] Fax [phone]
Visonic Iberica (Spain) Tel [phone] Fax [phone]
Visonic GmbH (Germany) Tel [phone] Fax [phone]
Visonic SARL (France) Tel [phone] Fax [phone]
Visonic Deson (East Asia) Tel [phone] Fax [phone]
Visonic Rep. (Nordic Countries) Tel [phone] Fax [phone]
Visonic Rep. (Latin America) Tel [phone] Fax [phone]
© VISONIC LTD. 2002 MCM-140 CE2460S9 (REV 05/02)
Visonic Ltd reserves the right to change specifications without prior notice.
Full warranty statement availble upon request.