visplay Qubo25P User manual

play it smart
Qubo 25 P/L
Assembly and operating instructions


Qubo25P/L
01/2021(EN)
These instructions facilitate the safe and eective use of
the “Qubo 25 P/L” product.
This manual is a component of the product and must be
kept on hand in the vicinity of the product at all times.
All personnel who deal with the product must have read
this manual. Compliance with all the safety instructions
and handling instructions specified in this manual is a
prerequisite for safe work.
The illustrations in this manual are provided for the pur-
poses of general understanding and may deviate from
the actual version.
All dimension information in this manual is specified in
mm.
Quality assurance
All processes in our company are subject to a compre-
hensive management system, which conforms to the qua-
lity standard ISO 9001 and the environmental standard
ISO 14001.
The Zertifizierungs- und Umweltgutachter GmbH (BSI)
company audits this management system regularly and
documents compliance with the standard via a certifica-
te.
Copyright
This manual is protected by copyright. Its use is permissi-
ble as part of the use of the product. Any use other than
this is not permitted without the written consent of the
manufacturer.
Our General Terms and Conditions apply for all orders.
Content
1 Safety .......................................................... 3
1.1 Explanation of symbols ...........................................3
1.2 Intended use ............................................................3
1.3 General hazards .....................................................3
2 Product description ...................................... 3
2.1 Overview..................................................................3
2.2 Brief description.......................................................3
2.3 Power supply............................................................3
3 Technical data .............................................. 4
3.1 Dimensions.............................................................. 4
3.2 Connected loads .................................................... 4
3.3 Weight loading....................................................... 4
3.4 Scope of delivery and accessories ........................ 4
4 Installation....................................................7
4.1 Unpacking .............................................................. 7
4.2 Storage ................................................................... 7
4.3 Requirements for the installation location ............. 7
4.4 Connecting frames with connecting tubes.............8
4.5 Alignment.................................................................8
4.6 Wall fixing brackets .................................................8
4.7 Inserting shelf frames ..............................................8
4.8 Wooden shelf at top for LEDluminaire.................. 9
4.9 Frame insert with LEDfor glass and metal shelves .. 10
4.10 Panel shelves und cable tray................................. 10
4.11 Storage compartments with drawer...................... 11
4.12 Hanging rail for central space .............................. 12
4.13 Hanging rail for the wall rack ............................... 12
4.14 Hanging rail with front arms for the central space ... 12
4.15 Visplay connector system...................................... 13
5 Operation.................................................... 14
5.1 Cleaning................................................................. 14
6 Dismantling and disposal............................ 14
6.1 Dismantling ............................................................ 14
6.2 Disposal.................................................................. 14


Qubo25P/L
01/2021(EN)
1 Safety
1.1 Explanation of symbols
Safety instructions are indicated in this manual as fol-
lows.
WARNING
A warning notice designated in this manner indi-
cates a potentially dangerous situation that could
result in death or serious injury if it is not avoided.
NOTE
A warning notice designated in this manner indi-
cates a potentially dangerous situation that could
result in material damage or environmental dam-
age if it is not avoided.
1.2 Intended use
The product is designed exclusively to hold merchandise
supports for displaying goods.
Only merchandise supports and consumers that comply
with the specifications in this manual are approved.
In the event of misuse, there is the danger that the
merchandise supports and the electrical devices
will be damaged. This can result in injuries and
damage to the product.
Area of implementation
The product may only be used in the commercial area.
Personnel
This manual describes how to install the product and how
to operate and clean the product. Consequently after
the product is installed this manual must be transferred to
the end user.
The contents of the section on “Assembly” is directed at
personnel, who undertake the assembly and the electri-
cal connection (e.g. shop fitters, qualified electricians).
The contents of the section on “Handling” is directed at
the end users (e.g. sales personnel, visual merchandis-
ers).
1.3 General hazards
>Use only approved accessories and electrical
devices.
>Comply with the permitted connection, maximum
load and equipment values.
>Do not lean any ladders against the merchandise
supports.
>Do not load the merchandise supports above the
maximum load capacity.
>Do not place any receptacles, from which fluids
can escape, on the merchandise supports.
>Keep moisture away from current conducting
components.
2 Product description
2.1 Overview
The Qubo 25 P/L is a structural shelving system, with a
high degree of design freedom, for centre room and wall
structures.
Fig. 1: Qubo 25 P/L
2.2 Brief description
Qubo25P/L is a steel frame with or without integrated
power tracks for electrified shelves with LEDluminaires,
with a 87.5mm hole matrix. This allows the use of shelves
with integrated light fittings for additional illumination of
the goods on display.
The structural system can be configured in many ways by
fitting connecting tubes.
2.3 Power supply
The 24V distributor supplies power to a maximum of
eight connections, each with a maximum of two 90W
converters. The switched input facilitates the use of a
power switch.
ø 7.7 mm
NV (24 V)
L = 200 mm
220–240 V
L = 200 mm
Fig. 2: Converter
NOTE
It is imperative to take account of power consump-
tion of the electrical devices.
The dimmer set 318-271.19 is required for the use of
dimmers.


Qubo25P/L
01/2021(EN)
For an overview of the electrical connection of the frames
and the required components see the section on Electrifi-
cation 4.15
3 Technical data
3.1 Dimensions
Converter dimensions, power-dependent
L = 200190 22
65
L = 200
Fig. 3: Converter dimensions
3.2 Connected loads
General
Specification Value Unit
Operating voltage 220–240 VAC
Frequency 50–60 Hz
Nominal voltage (SELV) 24 VDC
Maximum load 90 W
Mains protection class II
Maximum housing temperature
(converter)
90 °C
3.3 Weight loading
The maximum load applies including the dead weight
and the weight of all components
Frame
Specification Value Unit
Maximum load 350 kg
Shelves
Specification Value Unit
Shelf frames for wooden, glass and
metal inserts
Depth 330/475 mm
Wooden/glass shelves
Max.placement depth
30
280/425
kg
mm
Metal shelves
Max. placement depth
40
330/475
kg
mm
Hanging rail
Specification Value Unit
Maximum load 52 kg
3.4 Scope of delivery and accessories
3.4.1 Outside frame
Outside frame Steel frame with or without integrated
power tracks on one side for supplying electricity to
shelves with LEDs. The four spigots on one side are for
fitting connecting tubes.
330
475
860
1460
1860
2460
Fig. 4: Outside frame
3.4.2 Centre frame
Outside frame Steel frame with or without integrated
power tracks on one side for supplying electricity to
shelves with LEDs. The four spigots on both sides are for
fitting connecting tubes. The frames in each case can be
electrified or non-electrified.
330
475
860
1460
1860
2460
Fig. 5: Centre frame


Qubo25P/L
01/2021(EN)
3.4.3 Connecting tube set
The connecting tubes are screwed on to the four spigots
on the frame. Please use the assembly key (111-844.12).
A 650
A 800
A 1000
A 1300
Fig. 6: Connecting tubes
3.4.4 Non-electrified shelf frames
The shelf frames are used to support glass, wooden and
metal inserts. The steel frames, including the four shelf
supports, are hung between the frames.
A 650
A 800
A 1000
A 1300
475
Fig. 7: Shelf frame
Drawing number:
994-150 Glass insert 8mm
994-151 Wooden insert 19mm.
3.4.5 Electrified shelf frame
The shelf frames are used to support glass, wooden and
metal inserts. The steel frames are hung between the
frames using shelf supports. The shelf support set consists
of four supports, once of which is for the power take-up
(Fig. 8/1). An LEDluminaire is built into the electrified
shelf frame. The power take-up is at the rear left side,
and the LED luminaire is in the frame at the front.
A 650
A 800
A 1300
A 1300
475
Fig. 8: Electrified shelf frame
Drawing number:
994-150 Glass insert 8mm
994-151 Wooden insert 19mm.
3.4.6 Hanging rail for the central space
The hanging rail is hung between the frames.
475
A 650
A 1300
25 x 25
Fig. 9: Hanging rail for the central space
3.4.7 Hanging rail for the wall rack
The hanging rail is o-centre for the wall system.
25 x 25
475
350
A 650
A 1300
Fig. 10:Fig. 10: Hanging rail for the wall rackHanging rail for the wall rack
3.4.8 Front arm for hanging rail
475
180
180
A 650
A 1300
180
475
A 650
A 1300
Fig. 11:Fig. 11: Hanging rail with front arms clipped in (one or two-sided)Hanging rail with front arms clipped in (one or two-sided)
3.4.9 Hanging rail with front arms
The hanging rail with front arms is suspended between
the frames.
It comes in the following layouts:
• Hanging rail with one front arm on both sides for
650mm axis (A)
• Hanging rail with two front arms on both sides for
1300mm axis (B)
A B
475 A 650
25 x 25
25 x 25
625
A 1300
Fig. 12:Fig. 12: Hanging rail with front armsHanging rail with front arms


Qubo25P/L
01/2021(EN)
3.4.10 Non-electrified metal shelf
The metal shelves are suspended between the frames
using shelf supports.
A 650
A 1000
A 1300
475
Fig. 13:Fig. 13: Non-electrified metal shelfNon-electrified metal shelf
3.4.11 Electrified metal shelf
The metal shelves are suspended between the frames
using shelf supports.
The metal shelves come in the following layouts:
• with integrated LEDluminaire on one side
• with integrated LEDluminaire on both sides
• with integrated 3Vpower track on one side
• with integrated 3Vpower track on both sides
• with integrated LEDluminaire and 3Vpower track on
one side
• with integrated LEDluminaire and 3Vpower track on
both sides
The shelf support set consists of four supports, once of
which is for the power take-up (Fig. 14/1).
A 650
A 1000
A 1300
475
Fig. 14: Electrified metal shelf
3.4.12 Single power adapter with cable and socket
The power take-up can only be fitted to an electrified
frame (rear tube). Once inserted, the adapter must be
locked into place by pushing it down.
500
2.
1.
Fig. 15: Single power adapter with cable and socket
Specification Value Unit
Nominal voltage 24 VDC
Nominal current max.4 A
3.4.13 Wall brackets
The wall brackets ensure that high wall structures (over
1600 mm) are stable and do not tip over.
A B
Fig. 16:Fig. 16: Wall bracketWall bracket
NOTE
Wall bracket A is required for structures that con-
tain a glass or metal supports
3.4.14 Bottom beam
The bottom beams for the lower wooden inserts are
available separately. The beams are hung in the hole
matrix for support.
Fig. 17: Bottom beam
3.4.15 Cable tray
The cable tray including bottom beams act as stowage
for converters and cables.
514
A 330
A 450
Fig. 18: Cable tray


Qubo25P/L
01/2021(EN)
4 Installation
WARNING
Risk of injury from falling goods or merchandise
supports. If the installation is not executed properly
or if the substrate cannot accommodate the neces-
sary loads, the system can fail.
>Make sure that the fixtures and the base can
support a pulling force of 0.1kN per mounting
point.
4.1 Unpacking
Check the delivery for completeness and transport dam-
age immediately upon receipt.
Proceed as follows if there is apparent transport dam-
age:
• Do not accept delivery, or only accept delivery subject
to reservation.
• Note the scope of damage on the transport docu-
ments or on the delivery ticket of the freight forwarder.
• Initiate the claim process.
Packaging
The product is safely packed so that transport damage is
unlikely.
• Keep the original packaging for later transport.
• Only ship the product in the original packaging.
• Comply with all instructions that are specified on the
packaging.
Disposing of packaging material
If packaging material is no longer required, dispose of
it in accordance with the locally-applicable disposal
regulations.
4.2 Storage
Store the product and its components under the follow-
ing conditions:
• Do not store outdoors.
• Store in a dry and dust-free location.
• Do not expose to aggressive media.
• Protect from sunlight.
• Avoid mechanical shocks.
• Storage temperature: 23 °C
• Relative humidity: 50%
4.3 Requirements for the installation
location
The installation location must meet the following require-
ments:
• The installation location must be dry. Installation out-
doors is prohibited.
• The ceiling must be designed for, and able to support,
the load to be borne (check with architect and struc-
tural engineer).
1 Outside frame
1.1 Integrated power track
2 Wood / glass insert
3 Shelf frame
4 Connecting tube (top, bottom)
5 Centre frame
6 Wall bracket
7 Hanging rail
8 Glide, height-adjustable
9 Cable tray


Qubo25P/L
01/2021(EN)
4.4 Connecting frames with connecting
tubes
NOTE
The connecting tubes must be twisted with the as-
sembly tool and positioned properly.
4.5 Alignment
4.6 Wall fixing brackets
WARNING
Risk of injury due to tipping of the merchandise
support and falling products.
>For structures with a height of 1600mm or more,
the merchandise support must be affixed to the
wall with a stabiliser to prevent it from tipping!
4.7 Inserting shelf frames
Construction drawings are available to download in the
product section at www.visplay.com, or can be request-
ed if needed.
Drawing number:
994-150 Glass insert 8mm(1)
994-151 Wooden insert 19mm(2)


Qubo25P/L
01/2021(EN)
NOTE
With electrified versions, attention must be given to
the position of the electrified shelf support on the
shelf frame. In this figure always to the rear left.
1 LED luminaire
2 Electrification on shelf frame
3 Shelf support (3 x basic)
4 Shelf support (1 x electrified)
5 Outside frame, electrified
4.8 Wooden shelf at top for LEDluminaire
Construction drawings are available to download in the
product section at www.visplay.com, or can be request-
ed if needed.
Drawing number:
991-374Overview of wooden shelves
991-368Wooden shelf for single piece/end piece
left (1)
991-372Wooden shelf for central piece
991-390Wooden shelf for end piece, right (2)


Qubo25P/L
01/2021(EN)
4.9 Frame insert with LEDfor glass and
metal shelves
4.10 Panel shelves und cable tray
Construction drawings are available to download in the
product section at www.visplay.com, or can be request-
ed if needed.
Drawing number:
993-100Wooden shelf 19mm at top and also at bot-
tom for non-electrified structures (without cable tray).
993-117Wooden insert 19mm at bottom if structures
are electrified and cable tray is inserted.
A 1300:10x
A 1000:10x
A 650: 6x
A 800: 6x
A 1300: 8x
A 1000: 8x
A 650: 0x
A 800: 0x 4x
1 Shelf
2 Cable tray


Qubo25P/L
01/2021(EN)
4.11 Storage compartments with drawer
In the case of electrified structures, mount cable tray(2)
and converter(1) first.
In the case of multiple-axis structures, use filling piece (1).
278-178 middle filling piece T 475 mm
704-985 middle filling piece T 330 mm
Screw on side cover and body from the inside.


Qubo25P/L
01/2021(EN)
4.12 Hanging rail for central space
2.
1.
4.13 Hanging rail for the wall rack
1.
2.
4.14 Hanging rail with front arms for the central space
2.
1.
4x


Qubo25P/L
01/2021(EN)
4.15 Visplay connector system
NOTE
It is imperative to take account of power consumption of the electrical devices! The power consumption of all
electrical devices should be below the nominal output rating of the converter. It is generally recommended
to factor in a power reserve for additional electrical devices.
Powering with 90W converter
2 14 3
Powering with 2x90W converters (max. 180W)
2 135
31 2
UK UK
EU EU
4 5
1 Extension cable 24VDC
2 24VDC distributor, 8-way
3 90WLED converter
4 Supply lead 220–240VAC
5 220-240VAC distributor, 4-way


Qubo25P/L
01/2021(EN)
5 Operation
WARNING
Risk of injury from falling goods or merchandise
supports. The system can fail if the maximum
permissible load of the merchandise support is
exceeded.
>Observe the maximum load values of the indi-
vidual merchandise supports.
>Do not exceed the maximum load of 350 kg per
frame.
5.1 Cleaning
During the course of time, dust and deposits from clothes
hangers can settle on the merchandise supports. In order
that the goods on display do not become soiled, the
merchandise supports must be regularly cleaned.
Remove goods from the merchandise support.
1. Remove dirt on the merchandise support carefully
with a soft, dry cloth.
2. Remove stubborn dirt with a mild cleaning agent.
6 Dismantling and disposal
6.1 Dismantling
>Pull the power plug out of the power outlet.
>Dismount converter and power distribution mod-
ule (if present).
6.2 Disposal
NOTE
Hazards to the environment can occur if product
components are disposed of improperly.
>Ensure product components are disposed of in a
proper environmental manner or through waste
management specialists.
>Send components that can be recycled for recy-
cling.
• Send metal components for recycling or scrapping.
• Recycle plastic parts.
• Have an approved specialized disposal company
dispose of electrical and electronic components.
• Dispose of other components according to their mate-
rial characteristics.


Qubo25P/L
01/2021(EN)

www.visplay.com [email protected]