Vital Baby HYDRATE User manual

spout cups
HYDRATEHYDRATE
™™
www.vitalbaby.com
Made in China to Vital Baby®
specifications. Vital Innovations
Limited, Hatfield, Herts,
AL10 9EW, United Kingdom.
Vital Baby®is a registered
trademark.
HYDRATE™ is a trademark.
© Vital Innovations Ltd 2019.
IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY BEFORE USE.
For your baby’s safety
and health WARNING!
• Keep all components not in use out
of the reach of children.
• Always use this product with
adult supervision. Accidents have
occurred when babies have been
left alone with drinking equipment
due to the baby falling or if the
product has disassembled.
• Never use feeding teats or cup
spouts as a soother or teether.
• Inspect before each use.
Throwaway at the first sign of
damage or weakness.
• Continuous and prolonged sucking
of fluids will cause tooth decay.
Tooth decay in young children can
occur even when non sweetened
fluids are used. This can occur if
baby is allowed to use the cup for
long periods through the day and
particularly through the night, when
saliva flow is reduced or if it is used
as a soother.
• Take extra care when microwave
heating. Always stir heated food to
ensure even heat distribution and
test the temperature before serving.
• Keep all components not in use out
of the reach of children.
• Do not store or leave in direct
sunlight or near a source of heat, or
leave in sterilising solution for longer
than recommended, as this could
weaken the spout.
• Ensure that your cup is assembled
correctly in-line with the assembly
instructions.
Fully disassemble and wash all
components thoroughly in hot soapy
water or in the top rack of your
dishwasher before first and after
each use. Top rack dishwasher safe
(max.65°C). Suitable for all methods
of sterilisation. Do not use abrasive or
solvent based cleaning agents as this
may cause damage. Do not store or
leave in direct sunlight or near a source
of heat, or leave in sterilising solution
for longer than recommended, as this
could weaken the spout.
This product conforms to
BS EN 14350 standards.

31 2