Vitamix PROFESSIONAL 750 User manual

Owner's Manual
Read and save these instructions
Vita-Mix®Corporation
8615 Usher Road
Cleveland, Ohio 44138-2103 U.S.A.
1.800.848.2649 / 1.440.235.4840
PROFESSIONAL SERIES™750
vitamix.com •vitamix.co.uk •vitamix.ie

2
Contents ...................................................................................................................................... 2
Let’s Get Started....................................................................................................................... 3
Service and Registration ........................................................................................................4
Important Instructions forSafe Use ................................................................................... 5
Parts and Features...................................................................................................................8
Control Panel .............................................................................................................................11
About the Blades.....................................................................................................................13
Tamper....................................................................................................................................... 14
How to Use the Tamper ........................................................................................................16
Hints for Setting Speeds .......................................................................................................17
Operating Instructions ...........................................................................................................19
Care and Cleaning..................................................................................................................22
Troubleshooting ......................................................................................................................25
Warranty....................................................................................................................................27
Recycling Information .......................................................................................................... 30
Notes ...........................................................................................................................................31
Warranty....................................................................................................................................32
CONTENTS

3
Congratulations!
You are about to see how quick, easy and delicious healthy eating can be!
Please read all the safety information, warnings and instructional material found
in this booklet before getting started. Set your Vitamix machine on a dry, level
surface. Make sure the power switch is set to OFF and that the machine is
plugged into an earthed electrical outlet. Then, follow the cleaning instructions
on page 22 to prepare your machine for use. Always clean your machine
beforeyou first use it.
LET’S GET STARTED

4
SERVICE AND REGISTRATION
Vitamix Service
Record the model number and serial number of your Vitamix in the spaces
provided below for future reference. These numbers can be found on the back
of the motor base.
Model Number
Serial Number
Date of Purchase
Purchased From
Before returning this product for any reason, including repair, first contact
Vitamix Customer Services on [phone] or e-mail [email protected],
Tel. UK: 0808 156 6633, Tel. Ireland: 0766 709854 or contact your local dealer.
Product Registration
If you purchased your Vitamix® machine directly from the Vita-Mix® Corporation
via the company’s website or call centre by phone, your product was registered
at the time of purchase and your Vitamix machine’s warranty has been
activated.
If you purchased your Vitamix machine from an International Distributor or
Dealer in countries other than the United States, Canada, United Kingdom
or Ireland, your product is warranted through the International Distributor or
Dealer and need not be registered with the Vita-Mix Corporation.
Your machine is not yet registered with Vitamix if you:
1. Purchased from a Dealer in the United States, Canada, United Kingdom or
Ireland
2. Purchased from a military base
3. Purchased from a retail or wholesale outlet
4. Received your Vitamix machine as a gift
5. Are not the original owner of the machine
Enjoy faster and easier service in the future by taking a few minutes to register your
Vitamix machine today.
Choose one of these easy ways to register your machine:
1. Online at vitamix.com / warranty
2. E-mail [e-mail]
3. Call 1.800.848.2649 or +1.440.235.4840, press option 2
Your warranty may be honoured by Vita-Mix®Corporation or an authorised dealer.
Failure to register your machine will not diminish your warranty rights.

5
READ ALL INSTRUCTIONS, SAFEGUARDS AND
WARNINGS BEFORE OPERATING THE BLENDER.
1. Read all instructions.
2. Not intended for use by or near children or persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge. Close
supervision is necessary when any appliance is used by or near children or
incapacitated persons.
3. To protect against the risk of electrical shock, do not put the blender base in
water or any other liquid.
4. Unplug from the outlet when not in use, before putting on or taking o parts
and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cable or plug, or after the
appliance malfunctions or is dropped / damaged in any manner. Call
Vitamix Customer Services on 1.800.848.2649 or 1.440.235.4840 or e-mail
[email protected] at once for examination, repair and replacement,
or electrical or mechanical adjustment. If purchased outside the U.S.A. or
Canada, contact your local Vitamix dealer.
7. Alteration or modification of any part of the blender base or container,
including the use of any part or parts that are not genuine, authorised Vitamix
parts, may cause fire, electric shock or injury.
8. The use of attachments not expressly authorised or sold by Vitamix for
use with this blender, including canning jars, may cause fire, electric shock
orinjury.
9. Do not use outdoors.
10. Do not let the cable hang over the edge of the table or counter.
11. Do not let the cable come into contact with hot surfaces, including the hob.
12. Keep hands and utensils out of the container while blending to reduce the
risk of severe personal injury or damage to the blender. A rubber scraper or
spatula may be used, but only when the Vitamix blender is not running.
13. The tamper provided must be used only when the main part of the lid is
inplace.
14. Blades are sharp. Handle or remove the blade and blade assembly from the
container with extreme care to avoid injury. To reduce the risk of injury, never
place a blade assembly on the motor base unless assembled to the Vitamix
container.
WARNING:To avoid the risk of serious injury when using your
Vitamix® blender, basic safety precautions should be followed, including
the following:
IMPORTANT INSTRUCTIONS
FORSAFE USE

6
WARNING
To Avoid Injury.
Read and understand the instruction
manual before using this machine.
SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS
FORSAFE USE
15. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in
the container as this will damage the blades and other components when
starting the machine and may cause injury.
16. Never attempt to operate with damaged blades.
17. Always operate the blender with the lid and lid plug firmly in place. The
lid cap should be removed only when adding ingredients and when using
thetamper.
18. When blending hot liquids or ingredients, use caution; spray or escaping
steam may cause scalding and burns. Do not fill the container to the maximum
capacity. Always begin processing at the lowest speed setting, Variable
Speed 1. Keep hands and other exposed skin away from the lid opening to
prevent possible burns.
19. When making nut butter or oil-based food, do not process for more than one
minute after the mixture starts to circulate in the container. Processing for
longer periods can cause dangerous overheating.

7
IMPORTANT INSTRUCTIONS FOR SAFE USE
This product is intended for HOUSEHOLD USE ONLY and is not intended to be
used for commercial purposes.
Do not leave your Vitamix blender unattended when operating.
Any repair and servicing, or the replacement of parts must be performed by Vitamix
or an authorised service representative.
WARNING
Electrical Shock Hazard.
Use an earthed outlet only.
DO NOT remove earth.
DO NOT use an adaptor.
DO NOT use an extension cable.
Failure to follow instructions can cause death
orelectricalshock.
NOTICE: FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS AND
IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR VITAMIX
BLENDERTHAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF
SERIOUS INJURY.
IMPORTANT INSTRUCTIONS
FORSAFE USE

8
Drive Socket
Blade
Assembly
Lid Cap
2-Part Lid
Lid Flaps
Container
Retainer Nut
Centring Pad
Start / Stop
Switch
Feet
Tamper
Variable-
Speed Dial
Pulse Switch
Motor Base
PARTS AND FEATURES

9
On / O Switch: The On / O (or Power) Switch is on the right-hand side of the
machine base. The On / O Switch controls the power to the machine.
Start / Stop Switch: Pressing down on the Start / Stop Switch will initiate the
blending process. Pressing down on the Start / Stop Switch again will stop the
blending process.
Variable-Speed Dial: The centre Variable-Speed Dial serves two functions:the use
of three programmes or the use of ten variable-speed settings.
Pulse Switch ( ): The Pulse Switch can be used when using Variable Speeds or
Programmes.
Container: Millilitres, ounces and cups are clearly marked.
2-Part Lid: The 2-part Lid is easy to put on and take o and easy to clean. Always
use the lid and the lid plug when the machine is in operation.
CAUTION: Lids and tampers are not interchangeable between dierent
container styles, types and sizes.
Snap the lid onto the container and leave in place for a few minutes. Once the lid
has been left on the container, it will be much easier to lock or remove.
Lid Cap: Insert through the lid and secure by turning clockwise. Remove the lid
cap to use the tamper or to add ingredients.
Tamper: The tamper allows you to accelerate the process of very thick and / or
frozen mixtures that cannot be processed in a standard blender. Using the Tamper
maintains circulation by preventing air pockets from forming.
WARNING
Rotating Blades Can
CauseSevere Injury.
DO NOT reach into the container while
the machine is running.
PARTS AND FEATURES

10
Front
Back
On / O
Switch
PARTS AND FEATURES
To Lock the Lid in Place: Position the lid on the container with th lid flaps midway
between the spout and the handle. Push the lid onto the container until it locks
into place. The lid must always be secured when processing, especially when
blending hot liquids that may scald. Never operate the blender without checking
to make sure that the lid is securely locked in place.
To Remove the Lid: Lift up on one lid flap, while holding the container securely.
To Remove the Lid Cap: Rotate the lid cap anti-clockwise from the “locked” to the
“unlocked” position and lift out.
Automatic Overload Protection: Your Vitamix motor is designed to protect itself
from overheating. If the motor shuts o, follow these instructions:
Turn off the power switch for up to 45 minutes to reset. The reset time will be
extended if high room temperatures exist. To reduce the reset time, unplug the
machine, remove the container and blow air into the centre section of the bottom
with a hair dryer on the cool setting.
Power Cable: Your machine is
equipped with a long power
cable. Store the unused
portion neatly underneath.
Bottom View / Cable Wrap:
Plastic cable retainers hold
the cable securely. They are
flexible and return to position
after the cable is lifted out.

11
1. On / O Switch:
The On / O (or Power) Switch is located on the lower right-hand side of the
machine. The On / O Switch controls the power to the machine.
BEFORE moving the On / O Switch to the On (I) position, make sure that
the marker on the Variable Speed Dial is pointed at the Stop Symbol ( ) at
the top of the dial.
After plugging in the unit, move the On / O Switch to the On position to
ready the machine for blending. Move the On / O Switch to the O position
at night and whenever the machine is left unattended.
If the On / O switch is moved to the O position to stop a programme mid-
cycle, wait 30 seconds for power to recycle and the timer to reset before
moving the On / O switch back to the On position.
When the Pulse, Start / Stop, and Programme Symbols brighten, the On / O
Switch is in the On position and power is flowing.
2. Start ( ) / Stop ( ) Switch:
After the marker on the Variable-Speed Dial is rotated from the Stop Symbol
() either to Variable Speed 1 or a Programme setting, press the Start / Stop
Switch to start the machine and initiate the blending process. Pressing the
Start / Stop Switch again will stop the blending process.
Programmes can be interrupted by pushing down the Start / Stop switch
at any time. If reactivated by pushing down the Start / Stop switch, the
programme will start at the beginning.
23
4
5
OFF
ON
1
CONTROL PANEL

12
CAUTION
To Avoid Possible Burns, Never Start
on Speeds Above 1 when Processing
Hot Liquids.
Escaping steam, splashes or contents
mayscald.
To secure the contents, lock the lid and lid
cap securely in place prior to operating the
machine.
Always start on Variable 1, then slowly
increase to 10.
CONTROL PANEL
3. Pulse Switch ( ):
Variable Speed: Pressing down on the Pulse Switch will cause the machine to
blend at the speed setting shown on the Variable-Speed Dial for as long as
the Pulse Switch is held down.
Programmes: The Pulse function can be used when a programme is selected.
Pushing down the Pulse switch when a programme is selected will cause
the machine to run at 50% of high power for as long as the Pulse switch is
pusheddown.
4. Variable-Speed Dial:
The Variable-Speed Dial serves two functions: the use of five programme
settings or ten variable-speed settings.
• To use programmes: rotate the Variable-Speed Dial to the left to the
desired programme.
• To use Variable Speed:
a. Rotate the Variable-Speed dial to the right to 1.
b. Press down on the Start / Stop switch.
c. Rotate the Variable-Speed dial to the right or left during blending to
increase or decrease the speed of the blades.
d. At the end of the blending cycle, rotate the marker on the
Variable-Speed dial back to the Stop Symbol ( ) at the top of
thedial.
5. Programmes:
Your Professional Series 750 is equipped with five programme settings for
the most commonly used recipes. Rotating the Variable-Speed Dial left of
centre allows you to select a programme for Smoothies, Frozen Desserts,
Soups, Purées and a Cleaning cycle. These programmes are optimised for
these recipe categories, but may also work well with other recipe choices.

13
WARNING
Rotating Blades Can
CauseSevere Injury.
DO NOT reach into the container
whilethe machine is running.
Wet-Blade Container: Designed for processing liquids,
including juice, frozen mixtures, sauces, soup, purees, batter,
and for wet chopping. The wet blades can also grind grain
and knead dough, but they are not quite as efficient as
the dry blades in this application. If used for grinding, your
container will mar and become cloudy; See instructions for
dry container use.
Dry-Blade Container: These blades are clearly marked “D”
and are designed specifically for grinding dry materials such
as grains, cereal and coffee, and are also used for kneading
bread dough. The dry blades can NOT process liquids
efficiently. If you grind herbs on a regular basis, you may wish
to purchase a separate dry blade container and replace the
blades as needed.
D
WD
W
The wet-blade container comes as standard with the Vitamix machine. The blade is
identified by a “W” for wet. This blade is used for most of your recipes. Additional
containers with wet or dry blades may be purchased separately.
Moving Parts
May Become
Hot with
Extended
Use.
DO NOT touch.
ABOUT THE BLADES
CAUTION

14
CAUTION
Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between dierent
container styles, types and sizes. Use the tamper that was
supplied with your machine.
How to Determine the Tamper to be Used with Your
Container
Each type of tamper is designed to be used safely and eectively with a particular
container. If a tamper came with your container, it is the correct tamper for
the container. If a tamper did not come with your container or you want to
determine if a tamper that you already have can be used with your new container,
please compare your container with the containers and matching tampers in the
illustration below.
Before using the tamper during the blending process, verify that it is the
correcttamper.
• 2.0 L (64 oz.) Short Containers use Tamper 016041 that is approximately
24.8cm (9-¾ inches) long.
• 2.0 L (64 oz.) Tall Containers uses Tamper 000760 that is approximately
31.8cm(12-½ inches) long.
• 0.9 L and 1.4 L (32 oz. and 48 oz.) Containers use Tamper 015033 that is
approximately 27.9 cm (11 inches) long.
TAMPER
2.0 L / 64 oz. (SHORT) 2.0 L / 64 oz. (TALL) 1.4 L / 48 oz. 0.9 L / 32 oz.

15
TAMPER
To verify that you are using the correct tamper, place the lid on an empty container,
remove the lid cap and insert the tamper. If it is the correct tamper, it should fit
easily into the opening, but should not come into contact with the blades no matter
where you move the tamper inside the container. IF THE TAMPER TOUCHES THE
BLADES AT ANY ANGLE - DO NOT USE THE TAMPER WITH YOUR CONTAINER.
If you do not have the correct tamper for your container, call Vitamix Customer
Services on [phone] or [phone] or e-mail [email protected]
to order a new tamper. If purchased outside the United States or Canada, contact
your local Vitamix Dealer.

16
Tamper Splash Disk
Tamper
Blade Assembly
WARNING
Rotating Blades Can
CauseSevereInjury.
• DO NOT put hands, spatulas etc. into
the container while the machine is
running or while the container is still
on the base.
• Lids and tampers are not
interchangeable between dierent
container styles, types and sizes.
Usethe tamper that was supplied
with your machine.
IMPORTANT!
• The splash disk (near the top of
the tamper) and lid prevent the
tamper from hitting the blades
when the lid is secured properly in
the lockedposition.
• The container should not be more
than two-thirds full when the
tamperis used during blending.
• To avoid overheating during
blending, DO NOT use the tamper
for more than 30 consecutive
seconds.
• If the food does not circulate, the
machine may have trapped an
air bubble. Carefully remove the
lid cap, while making sure the lid
stays firmly in place. Release the
air bubble by inserting the tamper
through the lid cap opening.
HOW TO USE THE TAMPER
Lid
• Holding the tamper straight down may not help the ingredients circulate.
Ifnecessary, point the tamper towards the sides or corners of the container.
DO NOT try to force the tamper more deeply into the container.

17
Variable Speed
Before using the Variable-Speed option, always begin with the Variable-Speed
Dial marker pointing to the Stop Symbol ( ) at the top of the dial.
1. Rotate the dial to the right to Variable Speed 1.
2. To activate the blending process, press down on the Start / Stop Switch.
3. Slowly turn the Variable-Speed Dial to the desired speed, depending on the
recipe used.
4. At the end of the blending cycle, rotate the Variable-Speed dial back to the
Stop Symbol ( ) at the top of the dial.
Use the highest setting stated in the recipe for as much of the processing
time as possible to make smoothies, soup, shakes, frozen mixtures, purées,
nut butter, and for grinding grain. Processing times will generally be less than
one minute (most take less than 30 seconds). The higher speed provides
the best quality of refinement, breaking down ice, frozen fruit, whole fruit
orvegetables, and grains to a smooth, lump-free consistency.
Blending for too long at too low a speed setting will overheat the machine
and cause the Automatic Overload Protection to turn o the machine.
Blending on a higher speed maximises the working of the motor's cooling fan
to avoid overheating.
If the mixture stops circulating, you may have trapped an air bubble. To
resolve Insert the tamper through the lid plug and stir until it “burps”. If
this does not work, press the On / O switch to stop the motor. Remove
the container from the motor base and use a rubber spatula to press the
air bubble away from the blades. Return the container to the motor base,
replace the lid and continue blending.
CAUTION
To Avoid Possible Burns, Never Start
on Speeds Above 1 when Processing
Hot Liquids.
Escaping steam, splashes or contents
mayscald.
To secure the contents, lock the lid and
lid cap securely in place prior to operating
themachine.
Always start on Variable 1, then slowly
increase to 10.
HINTS FOR SETTING SPEEDS

18
HINTS FOR SETTING SPEEDS
Programmes
Programme blending speeds and duration vary and will stop automatically at the
end of the programme.
• The Smoothie ( ) programme runs for approximately 45 seconds.
• The Frozen Dessert ( ) programme runs for approximately 55 seconds.
• The Hot Soup ( ) programme runs for approximately 5 minutes, 45 seconds.
• The Purée ( ) programme runs for approximately 1 minute.
• The Cleaning ( ) programme runs for approximately 1 minute.

19
Wet-Blade Container
The Wet Blade Container is designed for processing liquids, including juice, frozen
mixtures, sauces, soups, purées, batters and for wet chopping.
Before using this container with programmes or the Variable-Speed option,
always begin with the Variable-Speed Dial pointing to the Stop Symbol ( ) at
thetop of the dial.
1. Move the On / O switch to the On position.
2. Load the container before placing it on the motor base. Place liquids and soft
foods in the container first, then solid items and, finally, ice. Although not
necessary for blending, you may want to cut or break food into smaller pieces
for more precise measurement of ingredients.
3. Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending(unless the tamper is inserted through the lid cap opening). Make
sure that the lid is securely latched, especially when blending hot ingredients.
4. With the motor o, set the wet-blade container on the motor base by aligning
it over the centring pad. Never attempt to put a container onto an operating
motor base or to operate a motor base without a container properly in place.
5. Use the Variable-Speed dial to select a function.
• Variable Speed - Rotate the dial to the right of centre to Variable Speed 1.
• Programmes- Rotatethe dialto theleft ofcentretothedesiredprogramme.
6. Activate the blades by pressing the Start / Stop Switch. Your container may
shift as it is aligned.
• Variable Speed - slowly rotate the Variable-Speed Dial to the right to the
desired speed.
• Programmes - The programme blending speeds and duration vary and
will stop automatically at the end of the programme. Programmes can
be interrupted by pushing down the Start / Stop switch at any time. If
reactivated by pushing down the Start / Stop switch, the programme will
start at the beginning.
7. If the mixture stops circulating, you may have trapped an air bubble. To
resolve, insert the tamper through the lid cap and stir until it “burps”. If
this does not work, press the On / O switch to stop the motor. Remove
the container from the motor base and use a rubber spatula to press the
air bubble away from the blades. Return the container to the motor base,
replace the lid and continue blending.
OPERATING INSTRUCTIONS

20
8. Take proper care when handling and processing hot ingredients and when
making hot soup and sauces.
9. Due to the machine's speed, processing times are much quicker than with
standard appliances. Until you are accustomed to the machine, time things
carefully to avoid over-processing.
10. After pressing the Start / Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
Dry-Blade Container
Before using this container with programmes or the Variable-Speed option, always
begin with the Variable-Speed Dial pointing to the Stop Symbol ( ) at the top of
the dial.
If purchased, your dry-blade container should be used only for hard, dry materials,
such as grain, and for kneading dough.
1. Load the container before placing it on the motor base.
2. Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid cap opening).
3. With the motor o, set the dry-blade container on the motor base by aligning
it over the centring pad. Never attempt to put a container onto an operating
motor base or to operate a motor base without a container properly in place.
4. To begin, make sure that the On / O switch is in the On position.
5. Use the Variable-Speed dial to select a function.
• Variable Speed - Rotate the dial to the right of centre to Variable Speed 1.
• Programmes - Rotate the dial to the left of centre to the desired
programme.
OPERATING INSTRUCTIONS
CAUTION
To Avoid Possible Burns, Never
Start on Speeds Above 1 when
Processing Hot Liquids.
Escaping steam, splashes or contents
mayscald.
To secure the contents, lock the lid and
lid cap securely in place prior to operating
themachine.
Always start on Variable-Speed 1 and
slowly increase to 10.