Vitek VTM-LCD561 User manual

VTM-LCD561
Model VTM-LCD561
Display Type 5.6" TFT LCD Panel
Input Signal NTSC or PAL
Video: 1Vp-p/75 ohm
Audio: 1Vp-p/100k ohm
Display Frequency NTSC: Fh=15.73KHz, fv=60HZ
PAL: Fh=15.63KHz, fv=50HZ
Display Resolution 960 x 234 dpi
Display Color Full color
Input Video Input x2
Audio input x2
Functions Functions controlled by OSD (On screen display)
Audio Volume: Audio output power: 0.5 Watts
Video Control: Video 1 / Video 2 / Reverse Picture,
Contrast, Bright color, Up / Down (picture), Reset
Power Input DC 12V+/- 15%
Operation Temp -20 C ~ +70 C
Storage Temp -30 C ~ +80 C
Humidity 10-90% RH
Dimensions 153 (H) x 134 (V) x 29.5 (D) mm
Viewing Angle 40 Degrees Horizontal / 90 Degrees Vertical
Product Manual
5.6”TFT Color LCD Display Monitor
LCD Specifications

Installation Operation
Bracket Installation
Wiring Diagram
LCD Buttons
Sw1 Sw2 Sw3Sw4 Sw5Sw6Sw7
Power N/R Function Video In Volume Up + Down -
Contrast Brightness Color
Up/DownReset
SW1 : Power On / Off
SW2 : Normal / Reverse
SW7 : Function
SW4 : Video Input
SW3 : Volume
SW6 : Up Key
SW5 : Down Key
Powers the unit On or Off.
Changes the display to a horizontally mirrored image, as seen below.
Used in conjunction with the Up / Down keys, the function button
adjusts the video settings as seen below.
Use in conjunction with the Up / Down keys to adjust the LCD volume.
Adjusts the input setting between:Video/Audio 1 and Video/Audio 2.
Top of LCD Unit
1) Insert metal plate into Slot
on back of unit.
2) Attach bracket to metal plate.
3) Adjust to comfortable viewing angle to complete.
Output device:
(Recorder, Camera, Etc.)