Vitek VT-PTZ220HD User manual

VITEK
VT-PTZ220HD
On Cue 2.0 MegaPixel HD-SDI
20x IP PTZ Camera
• 1/2.8” 2.0 Megapixel Sony® Exmor™ Progressive Scan CMOS Sensor
• Built-in X20 times Optical Power Zoom Camera. (4.7mm to 94mm)
• True Night Shot function with Exmor ICR Day/Night Function.
• 248 Programable Presets
• 8 Patterns record and play back user preference of surveillance path up to 480° sec.
• 16 Scans: 8 speed steps with smooth vector scan.
• 8 Tours: Each tour consists up to 42 Presets, Patterns, and Scans
• 8 Alarm inputs with 0~8 Priority / 2 Auxiliary outputs programmable NC & NO.
• 8 Privacy Zones: 4 Polygon / Video off or 4 masked Block /Video off / Mosaic
• 64 steps of variable speed from 0.1°/sec to 105°/sec.
• Max manual speed 420°/sec with Turbo key pressed, Preset speed is 420°/sec.
• Programmable user preferences of speed (Changeable 60°/sec to 105°/sec).
• Addressable up to 999 camera IDs (Extendable up to 399 in special mode).
• Built-in RS-485 receiver driver.
• On-site software upgrade and upload/download of programmed data into the KBD.
• Built-in power-line surge protection and lighting protection.

1. CONTENT VERIFICATION
Before installing the controller, please make sure that the following items are included in
the box:
If any of these materials are missing, please contact the vendor help desk immediately.
No.
Item
Quantity
Appearance
1
PTZ Dome Camera
1
2
User’s Manual
1
3
Mount Hardware
1set
4
Alarm Cable
2

HD-SDI CAMERA
1
2. DISCLAIMER
!While every effort has been made to ensure that the information contained in this
guide is accurate and complete, no liability can be accepted for any errors or
omissions.
!Vitek reserve the right to change the specifications of the hardware and software
described herein at any time without prior notice.
!No part of this guide may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language in any form, by any means, without
prior written permission of Vitek Industrial Video Products Inc.
!Vitek makes no warranties for damages resulting from corrupted or lost data due to
a mistaken operation or malfunction of the Speed Dome Cameras, peripheral
devices, or unapproved/unsupported devices.

HD-SDI CAMERA
2
3. WARNING AND CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhe ad symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated "dangerous voltage" within the product's
e nclosure that ma y be of sufficie nt m a gnitude to constitute a risk of e le ctric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instruction in the literature
WARNING
CAUTION
accompanying the product.

HD-SDI CAMERA
3
4. FCC COMPLIANCE STATEMENT
5. CE COMPLIANCE STATEMENT
FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO
COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO
PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN
THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE
INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL
AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE
USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN
EXPENSE.
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY
THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL EQUIPMENT COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME
NMB-003 DU CANADA.
WARNING
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER
MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

HD-SDI CAMERA
4
6. IMPORTANT SAFEGUARDS
1. Read these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this equipment near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves,
or other equipment (including amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the equipment.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this equipment during lightning storms or when unused for long periods
of time.
12. Refer all servicing to qualified service personnel. Servicing is required when
the equipment has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
equipment, the equipment has been exposed to rain or moisture, does not
operate normally, or has been dropped.
13. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU
ARE QUALIFIED TO DO SO.
14. Use certified / Listed Class 2 power supply only.

HD-SDI CAMERA
5
TABLE OF CONTENTS
1. CONTENT VERIFICATION............................................................0
2. DISCLAIMER .............................................................................1
5. CE COMPLIANCE STATEMENT.....................................................3
6. IMPORTANT SAFEGUARDS..........................................................4
7. FEATURES ...............................................................................7
8. INSTALLATION AND CONFIGURATION .........................................8
8.1 TYPICAL SYSTEM CONFIGURATION ..................................................................... 8
8.2 BASIC CONFIGURATION OF SPEED DOME CAMERA SYSTEM ......................................... 9
8.3 LAYOUT OF SWITCHES................................................................................. 10
8.4 PRINCIPLE OF TERMINATION .......................................................................... 12
8.5 DOME CAMERA ADDRESS (ID) ....................................................................... 14
8.6 SYSTEM SETUP .......................................................................................... 15
8.7 CONNECTIONS .......................................................................................... 16
8.7.1 How to Connect RS-485 .................................................................. 16
8.7.2 Connecting Video output................................................................. 16
8.7.3 Video Standard............................................................................... 16
8.7.4 Video Cable.................................................................................... 16
8.7.5 Connecting Alarms .......................................................................... 17
8.7.6 Power Supply (AC/DC) .................................................................... 18
8.8 MOUNTING THE DOME CAMERA....................................................................... 19
8.9 POWER ON AND BOOT-UP SEQUENCE ................................................................ 21
8.10 NORMAL DISPLAY (OSD)........................................................................... 22
9. PROGRAM & OPERATION..........................................................23
9.1 DOME CAMERA KEY BOARD CONTROLLER..................................................... 23
10. FUNCTIONS......................................................................... 24
10.1 MAIN MENU ........................................................................................... 24
10.1.1 Home Function ............................................................................. 24
10.1.2 Preset.......................................................................................... 25
10.1.2.1 Edit Title .............................................................................................................26
10.1.2.2 Edit Position........................................................................................................26
10.1.3 Pattern ........................................................................................ 27
10.1.4 Scan ............................................................................................ 29
10.1.5 Tour ............................................................................................ 30
10.1.6 RUN FUNCTION.............................................................................. 31
10.2 Actions ........................................................................................... 32
10.2.1 Alarm Action..........................................................................................................32
10.2.2 Alarm List .............................................................................................................33
10.2.3 Clear Alarm List ....................................................................................................34
10.2.4 Schedule Action.....................................................................................................34
10.2.5 Schedule Action List..............................................................................................38

HD-SDI CAMERA
6
10.3 Screen ............................................................................................ 38
10.3.1 Language ...............................................................................................................38
10.3.2 Privacy Zone ..........................................................................................................38
10.3.3 North Direction ......................................................................................................40
10.3.4 Zone Title...............................................................................................................40
10.3.5 CAMERA TITLE .......................................................................................................41
10.3.6 OSD DISPLAY .........................................................................................................42
10.4 CAMERA SETUP ................................................................................ 43
10.4.1 AE Control (Automatic Exposure) .........................................................................43
10.4.2 WB Control (White Balance) ..................................................................................46
10.4.3 Focus Control.........................................................................................................47
10.4.4 Night Shot..............................................................................................................48
10.4.5 Digital Zoom...........................................................................................................48
10.4.6 Gamma...................................................................................................................48
10.4.7 Noise Filter.............................................................................................................49
10.4.8 Camera Default ......................................................................................................49
10.5 Date/Time....................................................................................... 49
10.6 Data ............................................................................................... 53
10.7 Setup.............................................................................................. 54
10.7.1 Preset Freeze.........................................................................................................54
10.7.2 Speed.....................................................................................................................54
10.7.3 Communication ......................................................................................................54
10.7.4 Dome Angle ...........................................................................................................55
10.7.5 CALIBRATION .........................................................................................................56
10.7.6 Password SETUP ....................................................................................................56
10.7.7 Installation .............................................................................................................57
10.7.8 Flip Offset ..............................................................................................................57
10.7.9 System Information ...............................................................................................57
11. APPENDIX ............................................................................59
11.1 SPECIFICATION.................................................................................... 59
11.2 DIMENSION ............................................................................................ 61
11.3 TROUBLE SHOOTING.................................................................................. 62
12. GLOSSARY ...........................................................................63

HD-SDI CAMERA
7
7. Features
The PTZ Dome Camera features a high resolution Sony®Exmor CMOS image
sensor, That supports FULL HD (high definition) to produce high-quality images.
User friendly, on-screen pull-down menus and short-cuts make it easy to setup
and program functions.
!Built-in HD SDI driver.( SMPTE 274M, SMPTE 296M compatible.
720p/1080p)
!Built-in 20X Optical Power Zoom Camera(12X digital zoom/240X with optical
zoom).
!248 Presets programmed with view direction, zoom, focus, and AE.
!8 Tours consist of Preset, Pattern, Auto-Scan and other Tours can be
programmed with over 377 functions and Preset location. While moving,
each Preset scan can be watched in smooth Vector Scan mode.
!16 Scans, 1 Auto Pan: 8speed steps from slow to medium panning with
smooth Vector Scan.
!8 Patterns (up to 480 second). 
!16 Area Titles.
!Wide Dynamic Range Mode (WDR)
!Variable speed from 0.1°/sec to 420°/sec.
!Turbo speed is Max 420°/sec when the TURBO key is pressed.
!8 Alarm inputs with 0~ 3 priority / 2 Auxiliary outputs programmable N.C. and
N.O.
!8 Privacy Zones: : 4 POLYGON / V.OFF or 4 masked BLOCK / V.OFF /
MOSAIC
!Addressable up to 999 camera IDs (Extendable up to 3999 in special mode).
!Built-in RS-485 receiver driver.
!On-site firmware upgrade and upload/download of programmed data into the
KBD or base on the PTZ Dome camera. (Full function version only.)
!Built-in power-line surge protection and lightning protection.
!Optional Tinted Bubble, Indoor & Outdoor pendant housing with heater &
blower, Indoor
!Flush Mount, Parapet mount & Roof Top mount.
!Adaptive tilt limit control according to the zoom ratio provides.
!Block mode alarm preset
!On screen popup menu provides an easy way to control the dome system
using simple keyboard.

HD-SDI CAMERA
8
8. INSTALLATION AND CONFIGURATION
8.1 TYPICAL SYSTEM CONFIGURATION
Additional Speed Dome joystick controllers and a variety of external switching
devices such as HD-SDI multiplexers (MUXs) and HD-SDI Digital Video
Recorders (DVRs) may be incorporated to accommodate the needs from a small
to a large surveillance/security system.
Figure 1 illustrates sample installation.
Figure 1- Typical System Configuration

HD-SDI CAMERA
9
G-+
DC 12V
DATA1 G
SLAVE KBD
DATA2 +
DOME1
-DVR
DVR ALARM/ PC
DATA2 DATA1
STP AWG # 22
VIDEO
BNC MONITOR
J-BOX BACK
J-BOX FRONT
KEYBOARD CONTROLLER
REAR
AC 24V
POWER
HALF DUPLEX MODE
RS-485
RXB
RXA TXA(TX+)
TXB(TX-)
CONTROLLER
DOME
COMM.(TXA/TXB)
POWER
AC 24V
AC 24V
HEATER
1 AUX OUTPUT
4 ALARM INPUT
8.2 BASIC CONFIGURATION OF SPEED DOME CAMERA SYSTEM
Figure 2 - Basic Installation Diagram

HD-SDI CAMERA
10
8.3 LAYOUT OF SWITCHES
Figure 3 – HD-SDI Layout of Switches

HD-SDI CAMERA
11
Figure 4 – HD-SDI Sub Connector

HD-SDI CAMERA
12
8.4 PRINCIPLE OF TERMINATION
Every device that is connected at the end of the communication data line must be
terminated by either the DIP switch setting or an appropriate device such as a
termination jumper to prevent potential control signal errors.
See Figure 6 for termination switch settings and Figure 7 for examples of devices
requiring termination. Note: Total length of the cable for communication should
not exceed 1.2Km or .74 mile.
S8
Figure 5 - Setting Dome Camera Termination
** Unless communication error, Set switch 3, 4 of S2 in OFF state.
Position 3, 4 should be set as a pair. (Both 3, 4 to ON position or OFF position)
S8:
1
2
3
4
Terminated
ON
X
X
X
Not terminated
OFF
X
X
X
Pull Up/Down **
X
X
ON
ON
Normal **
X
X
OFF
OFF

HD-SDI CAMERA
13
Figure 6 - Termination Diagram

HD-SDI CAMERA
14
8.5 DOME CAMERA ADDRESS (ID)
Each dome camera must have a unique address (ID). Identical IDs on the same
line may damage the control circuit caused by an electrical short. When
installing multiple dome cameras or a DVR, it is recommended that the dome
camera ID’s be identical to the camera port of the DVR.
Cam Port 1 = Dome ID1, Cam Port 2 = Dome ID 2 … Cam Port 16 = Dome ID 16.
If more than 16 dome cameras are installed using two or more DVRs the
following formula is useful to determine the Dome ID: ID =16x (n-1) +m (where
n= number of DVR, m=Camera Port)
Refer to Figures 8 for setting the dome camera address (ID) and protocol
DI Digit
100 10 1
S1 S2 S3
Figure 7 - Setting Dome Camera Address (ID)
DOME ID
100
10
1
1
0
0
1
.
.
.
.
999
9
9
9

HD-SDI CAMERA
15
8.6 SYSTEM SETUP
The PTZ Dome Camera support several High Definition video standards
such as 1080i 60Hz, 1080i 50Hz,1080p 30Hz, 1080p 25Hz, 720p 60 Hz or 720p
50Hz, 720p 30 Hz or 720p 25Hz. (1080p 30Hz = 1080p 30 fps)
See Figure 9 (S4) for the appropriate protocol switch settings.
The PTZ Dome camera is capable of negotiating with multiple protocols if the
communication speed is matched (same baud rate i.e., 9600 bps).
See Figure 8 (S5 and S6) for the appropriate protocol switch settings.
Note: 1. Consult service personnel if a dome camera is installed with a
device other then recommended PTZ Dome Controller.
2. You must reboot after setting the
system setup switch’s (cycle power).
S4 S5 S6
Video format Baud rate protocol
Video Format S4 :
1
2
3
4
1080i 60
ON
OFF
OFF
OFF
1080i 50
ON
OFF
OFF
ON
720p 60
ON
OFF
ON
OFF
720p 50
ON
OFF
ON
ON
1080p 30
ON
ON
OFF
OFF
1080p 25
ON
ON
OFF
ON
720p 30
ON
ON
ON
OFF
720p 25
ON
ON
ON
ON
Baud Rate S5 :
1
2
3
4
2400
x
OFF
OFF
OFF
4800
x
OFF
OFF
ON
9600
x
OFF
ON
OFF
19200
x
OFF
ON
ON
38400
x
ON
OFF
OFF
Protocol S6 :
1
2
3
4
Auto Detect (No Parity)
OFF
OFF
OFF
OFF
Auto Detect (Even Parity)
OFF
OFF
OFF
ON
EZ
OFF
OFF
ON
OFF
PP
OFF
OFF
ON
ON
PD
OFF
ON
OFF
OFF
Figure 8 - Protocol Selection Tables

HD-SDI CAMERA
16
8.7 CONNECTIONS
8.7.1 How to Connect RS-485
The dome camera has a built-in RS-485 receiver so that it can be controlled
remotely by an external control device such as a joystick controller or a DVR.
RS-485: Connect the Tx(D)+and Tx(D)- of the RS485 control devices (KBD,
DVR…) to RX+, RX- of the dome camera.
Figure 9 - Connection RS-485
RS-485 does not allow for a star connection layout. A splitter is required if a star
connection layout is desired. RS-485 guarantees 1.2 Km(4000 ft) of data line
routing. A repeater is recommended to extend over 1.2 Km.
8.7.2 Connecting Video output
1. In the initial installation of the camera, you can connect the camera to a HD-
SDI monitor to check the connection status.
2. When connecting a general monitor device with HDMI or YPbPr component
input to the HD-SDI video output, you need to use a signal converter (SDI to
HDMI or SDI to YPbPr component).
8.7.3 Video Standard
1. Countries and territories use different broadcasting television systems. to
ensure a correct video signal transmission, the appropriate video standard for
your country must be set at the device.
2. Select 1080i60/1080p30/720p60/720p30 for “NTSC countries”
3. Select 1080i50/1080p25/720p50/720p25 for “PAL countries”
8.7.4 Video Cable
The cable connecting the camera’s video output and a monitor is a BNC
coaxial cable as shown below.

HD-SDI CAMERA
17
If the distance between the camera and the monitor exceeds the recommended
maximum, please use an auxiliary HD-SDI Repeater.
Figure 10 – HD-SDI Video Cable
8.7.5 Connecting Alarms
Alarm In (AL1 to 8)
Magnetic, PIR or other external sensor devices can be used to signal the dome
camera to react to an event.
If you want to use alarm input, the types of sensor must be selected in OSD
menu. The sensor types are ‘Normal Open’ and ‘Normal Close’.
Select Alarm input in OSD menu
Normal Open Sensor devices: Select NO
Normal Close Sensor devices: Select NC
Alarm In activation:
N.O. ---Short circuit between GND and Alarm Input pin
N.C. ---Open circuit between GND and Alarm Input pin
Alarm Out 1,2
If you want to use alarm Output, the Number of output “1” and “2” must be
selected in OSD menu.
1. Alarm out “1” in OSD menu
2. Alarm out “2” in OSD menu

HD-SDI CAMERA
18
Alarm out (NO,NC,COM) activation
Figure 11 - Alarm Cable assignment
GND (Ground)
NOTE: All the connectors marked GND are common.
Connect the ground for the Alarm input and /or alarm output to the GND
connector.
NO / NC (Normal Open or Normal Close /Contact Relay Output)
The dome camera can activate external devices such as buzzers or lights using
dry contact relays. Connect the device to the NO (NC) (Alarm Out) and COM
(Common) connectors. (See Figure 5 /12)
8.7.6 Power Supply (AC/DC)
You can use either AC 24V/2A or DC 12V/2A adaptor.
Use certified / Listed Class 2 power supply Only.
J1: Alarm1(part A)
J2: Alarm2 (part B)
Black
Alarm1
Black
Alarm5
Brown
Alarm3
Brown
Alarm6
Red
Alarm3
Red
Alarm7
Orange
Alarm4
Orange
Alarm8
Yellow
A1 GND
Yellow
A2 GND
Green
COM A
Green
COM B
Blue
NC A
Blue
NC B
Gray
NO A
Gray
NO B