Vitek VTD-13FN User manual

VITEK
ENVI Series
ENVI Series 1.3 & 2.o MegaPixel
Indoor Dome Camera Series
• 1/3” 1.3 & 2.0 Megapixel Progressive Scan CMOS image sensors
• Up to 30fps live view @ 1920x1080p (2.0 MegaPixel Models) / 1280x1024 (1.3
MegaPixel Models)
• 3.8mm Fixed / 2.8-10mm Varifocal Auto Iris Lens options
• 2D-DNR Noise Reduction
• 16:9 (2.0 MegaPixel Models) / 4:3 (1.3 MegaPixel Models) Video format
• Secondary video output for installation & maintenance
• H.264/MJPEG Dual Streaming
• Minimal Latency with up to 16 simultaneous user connections
• Onvif Compliance
• EDGE recording with onboard MicroSD memory card slot (supports up to 32GB
of local storage)
• Optional Wall Mount available
• 12VDC Operation / Optional PoE (Power over Ethernet)
Specifications & installation procedure subject to change without notice.
Visit www.vitekcctv.com for the most current information available.

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
1
Table of Contents
1. Box Contents............................................................................................................................6
2. Included Accessories ................................................................................................................6
3. Available Accessories................................................................................................................6
3.1. Wall Mount (VT-AP/WMT)............................................................................................6
4. VTD-13FN Installation...............................................................................................................7
4.1. Connections.................................................................................................................7
5. VTD-13VN / VTD-20VN Installation............................................................................................9
5.1. Connections.................................................................................................................9
6. Camera Software Installation ..................................................................................................13
7. VTD-13FN / VTD-13VN / VTD-20VN Features...........................................................................16
8. IP Installer: Introduction.........................................................................................................17
9. Installing and Uninstalling.......................................................................................................17
9.1. Installing IP Installer ..................................................................................................17
9.2. Uninstalling IP Installer...............................................................................................20
10. Using IP Installer .................................................................................................................23
10.1. Starting the Program ..................................................................................................23
10.2. Search Product...........................................................................................................24
10.3. Manual Network Setup................................................................................................25
10.4. Automatic Network Setup............................................................................................27
10.5. Using DHCP Server.....................................................................................................30
10.6. Using PPPoE...............................................................................................................30
10.7. Updating Firmware.....................................................................................................32
10.8. Filter Configuration.....................................................................................................34
10.9. Live View ...................................................................................................................35
11. Admin Menu of VITEK VTD-13/VTD-20 Series........................................................................37
11.1. Entering Admin Menu .................................................................................................37
11.2. Admin Menu Structure ................................................................................................38
12. Quick Configuration..............................................................................................................38
12.1. Step 1:Changing Server Name.....................................................................................38
12.2. Step 2: Time Setup.....................................................................................................38
12.3. Step 3: Network Setup................................................................................................38
12.4. Step 4: IPCCTVDNS.COM............................................................................................39
12.5. Step 5: Recording Configuration..................................................................................39
12.6. Finish.........................................................................................................................39
13. System Configuration Menu ..................................................................................................39
13.1. Server Name Setup.....................................................................................................39
13.2. Date & Time...............................................................................................................40

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
2
13.3. Admin Password.........................................................................................................41
13.4. Access Control............................................................................................................41
13.5. User Registration........................................................................................................41
13.5.1. Add.................................................................................................................41
13.5.2. Edit.................................................................................................................43
13.5.3. Delete.............................................................................................................43
14. Network Configuration..........................................................................................................43
14.1. Static IP Configuration................................................................................................44
14.2. DHCP Client Configuration...........................................................................................44
14.3. PPPoE Configuration...................................................................................................45
14.4. Network Ports ............................................................................................................45
14.5. Bandwidth Control Configuration .................................................................................46
14.6. View Network Status...................................................................................................47
14.7. Network Status Notify.................................................................................................47
14.8. IP-CCTV DNS Setup....................................................................................................48
14.9. Port Forwarding & UPnP .............................................................................................49
14.10.RTP/RTSP Setup.........................................................................................................50
15. Device Configuration ............................................................................................................52
15.1. Privacy Zone ..............................................................................................................52
15.2. Camera & Motion .......................................................................................................54
15.2.1. Camera Configuration.......................................................................................56
16. Advanced Configuration........................................................................................................60
16.1. Advanced Services......................................................................................................61
16.1.1. E-mail Service Configuration.............................................................................62
16.1.2. FTP (Buffered) Service Configuration.................................................................65
16.1.3. FTP (Periodic) Service Configuration..................................................................67
17. Recording Configuration for Cameras with microSD card ........................................................69
17.1. MicroSD Configuration ................................................................................................69
17.2. Recording Configuration with microSD card..................................................................72
18. Utilities................................................................................................................................75
18.1. System Log................................................................................................................76
18.2. Save Configuration .....................................................................................................76
18.3. Reboot.......................................................................................................................76
18.4. Factory Default...........................................................................................................77
18.5. System Update...........................................................................................................77
19. ENVI Series Viewer...............................................................................................................80
19.1. Introduction...............................................................................................................80
19.2. Key Features..............................................................................................................80
19.3. System Requirement for PC.........................................................................................80

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
3
20. Installing and Uninstalling.....................................................................................................81
20.1. Installing ENVI Series Viewer ......................................................................................81
20.1.1. Installing on Web Browser................................................................................81
20.1.2. Manual Installation...........................................................................................83
20.2. Uninstalling ENVI Series Viewer...................................................................................84
20.2.1. Uninstalling with Program Menu........................................................................84
20.2.2. Uninstalling on Control Panel ............................................................................85
21. Starting ENVI Series Viewer..................................................................................................86
21.1. Control Bar ................................................................................................................87
21.2. Channel Control Bar....................................................................................................88
21.3. OSD Channels Buttons................................................................................................88
21.3.1. Saving as Image File........................................................................................88
21.3.2. Saving as Video File .........................................................................................89
21.3.3. Manual Recording ............................................................................................89
21.3.4. Instant Playback ..............................................................................................90
21.4. Extended Features......................................................................................................91
21.4.1. Pausing Live Video...........................................................................................91
21.4.2. FPS Control .....................................................................................................91
21.4.3. Flip Control......................................................................................................92
22. EN-V-R: Introduction............................................................................................................93
23. Requirements for Installation................................................................................................94
23.1. EN-V-R Versions.........................................................................................................94
23.2. System Requirement for PC.........................................................................................94
24. Installing EN-V-R..................................................................................................................95
25. Uninstalling EN-V-R..............................................................................................................97
25.1. Closing Active EN-V-R.................................................................................................97
25.2. Executing Uninstaller ..................................................................................................98
26. Components of EN-V-R Program ...........................................................................................99
26.1. EN-V-R Configurator ...................................................................................................99
26.2. EN-V-R Service...........................................................................................................99
26.3. EN-V-R Controller .......................................................................................................99
26.4. EN-V-R System Tray Menu........................................................................................100
27. Starting EN-V-R Configurator ..............................................................................................100
28. Quick Start Guide...............................................................................................................102
28.1. EN-V-R Configurator User Interface ...........................................................................102
28.2. Searching for IP Devices...........................................................................................103
28.3. Registering IP Devices ..............................................................................................104
28.4. Viewing Live Video ...................................................................................................107
28.5. Recording Video.......................................................................................................108
29. ENVI Smart Player..............................................................................................................113

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
4
29.1. Introduction.............................................................................................................113
29.2. Key Features............................................................................................................113
29.3. System Requirement for PC.......................................................................................113
30. Installing and Uninstalling...................................................................................................114
30.1. Installing Smart Player..............................................................................................114
30.1.1. Manual Installation.........................................................................................114
30.2. Uninstalling Smart Player ..........................................................................................116
30.2.1. Uninstalling on Program Menu ........................................................................116
31. Configuring & Viewing Player..............................................................................................126
31.1. Main Window View ...................................................................................................127
31.2. Connecting to NVR Player .........................................................................................128
31.3. Creating a Group......................................................................................................128
32. Searching Video.................................................................................................................130
32.1. Searching Video .......................................................................................................130
32.2. Daily Search.............................................................................................................130
32.2.1. Search Mode..................................................................................................131
32.2.2. GO to Time Position .......................................................................................131
32.3. Condition Search Mode .............................................................................................131
32.3.1. Advanced Search Mode ..................................................................................132
33. Video Playback Controls......................................................................................................133
34. Extra Features ...................................................................................................................134
34.1. Window Control........................................................................................................134
34.2. Recording Period......................................................................................................134
34.3. Backup ....................................................................................................................135
34.4. Snapshot .................................................................................................................136
34.5. Print ........................................................................................................................137
34.6. Ratio Display............................................................................................................137
35. EN-V-R Configuration .........................................................................................................139
35.1. System, Network Configuration .................................................................................139
35.1.1. Configuring System name...............................................................................139
35.1.2. System, Network Configuration - Admin password ...........................................140
35.1.3. System, Network Configuration - Access Control..............................................140
35.1.4. System, Network Configuration - HTTP Port.....................................................141
35.1.5. System, Network Configuration–IP CCTV-DNS .................................................141
36. IPCCTVDNS Registration.....................................................................................................142
37. IP-Device Registration........................................................................................................148
37.1. IP-Device Registration (Manual) ................................................................................148
37.2. IP-Device Registration (Automatic)............................................................................150
IP-Device Modification.................................................................................................152
37.3. IP-DeviceDeletion.....................................................................................................154

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
5
37.4. IP-Device Homepage................................................................................................154
37.5. Camera Management................................................................................................154
37.5.1. Configure Camera Name and Information........................................................155
37.5.2. Camera Resolution, Quality.............................................................................156
37.5.3. Configure Camera Recording Condition ...........................................................157
37.5.4. Alarm, Event Configuration.............................................................................160
37.6. User Management ....................................................................................................161
37.6.1. User Registration ...........................................................................................162
37.6.2. User Modification ...........................................................................................162
37.6.3. User Deletion.................................................................................................163
37.7. Disk Setup ...............................................................................................................163
37.7.1. Disk Setup.....................................................................................................163
37.7.2. Disk Quota Modification and Deletion..............................................................163
37.7.3. Disk Mode Change .........................................................................................164
37.8. Utilities ....................................................................................................................166
37.8.1. Email account Configuration ...........................................................................166
37.8.2. About Program ..............................................................................................167
38. Using EN-V-R Controller......................................................................................................168
39. Connecting to EN-V-R.........................................................................................................169
39.1. PC with EN-V-R installed ...........................................................................................169
39.2. PC without EN-V-R....................................................................................................170

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
6
1. Box Contents
1) Dome Camera
2) Mounting Accessories
3) ENVI Series CD
2. Included Accessories
Self Tapping Screws
For mounting dome to ceiling, wall etc.
Type #: Phillips head ST4x30
Qty: 2
Secondary Video Output Cable
To be used with a service monitor for adjusting the angle, focus and zoom.
Qty: 1
3. Available Accessories
Optional Wall Mount:
3.1. Wall Mount (VT-AP/WMT)

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
7
4. VTD-13FN Installation
4.1. Connections
1. Power
Depending on the type of installations, apply power to the camera by one of the options
below.
a) Via Ethernet – Use only with POE switch (100 Meters max distance)
b) 12VDC - Use with 12VDC 500mA
NOTE: If your camera is PoE you do not need to apply
separate power
2. Ethernet connection
a) Insert one end of the Ethernet cable into the network jack of your camera, and insert the
other end into the data port (sample: switch, router, etc)
3. Remove the dome cover from the camera using a coin

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
8
4. Place the camera in the desired location and install usingsupplied screws.
5. With the help of a hand held monitor (VTM-LCD351 not included) you can adjust the field of
view and focus the camera.
a) Connect the secondary video cable between the camera and the monitor BNC as shown
below.
6. Adjusting Camera View
You can adjust the camera’s Pan / Tilt
7. Removable Storage
For recording directly on the camera you will need to install a MicroSD card, this will allow
you to play video directly from the camera. The MicroSD card willneed to be formatted.
(refer to Section 17.1MicroSD Configuration on page 69for instructions on Formatting)
Note: (Please use only class 10 MicroSD cards)

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
9
8. After the camera adjustments are completed, place the dome cover back on to the camera
base.
5. VTD-13VN / VTD-20VN Installation
5.1. Connections
1. Power
Depending on the type of installations, apply power to the camera by one of the options
below.
a) Via Ethernet – Use only with POE switch (100 Meters max distance)
b) 12VDC - Use with 12VDC 500mA
NOTE: If your camera is PoE you do not need to apply
separate power

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
10
1. Ethernet connection
b) Insert one end of the Ethernet cable into the network jack of your camera, and insert the
other end into the data port (sample: switch, router, etc)
2. Remove the dome cover from the camera using a coin
3. Place the camera in the desired location and install usingsupplied screws.
4. With the help of a hand held monitor (VTM-LCD351 not included) you can adjust the field of
view and focus the camera.
b) Connect the secondary video cable between the camera and the monitor BNC as shown
below.

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
11
5. Lens Adjustment
a) Loosen Zoom & Focus screw and make necessary adjustments as shown.
Field of view: Telephoto(T) to Wide(W)
Focus: Near(N) to infinity (∞)
6. Adjusting Camera View
You can adjust the camera’s Pan / Tilt
7. Removable Storage
a) For recording directly on the camera you will need to install a microSD card, this will allow
you to play video directly from the camera. The MicroSD card will need to be formatted.
(refer to Section 17.1MicroSD Configuration on page 69for instructions on Formatting)

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
12
8. After the camera adjustments are completed, place the dome cover back on to the camera
base.

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
13
6. Camera Software Installation
1. Run IP Installer Software from the CD program on a computer that is on the same network
as the IP camera.
2. StartIP Installer, by double clicking the icon “IP Installer”
3. After the program has started, the main window of IP Installer program will appear on the
screen as shown below.
4. Search for the installed camera on the network by clicking the search product icon, the
camera should appear as the image below. The default IP address is 10.20.30.40
5. To assign an automatic IP address to this camera within the network, click the “Automatic IP
Setup” icon
6. Verify the Automatic IP address provided, enter the default password root and then click Set
as shown below.

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
14
7. After the camera was configured by the program automatically, you will be able to get access
by
a) Right click over the camera information, “
Go Product Homepage ”
b) Click over the icon “
Connect Product Homepage ”
8. From the Home Page, you can “
Live View” or administrate “Admin” the camera.

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
15
On Live View you will be able to see live video from your camera.
NOTE: For more information, refer to Section 11Admin Menu of VITEK VTD-13/VTD-20
Series on page 37.

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
16
7. VTD-13FN / VTD-13VN / VTD-20VN Features
VTD-13FN
ENVI Indoor 1.3 MegaPixel IP Dome Camera Series
1/3" 1.3 Megapixel Progressive Scan CMOS imager
Up to 30fps live view @ 1280x1024
3.8mm Fixed Lens Included
2D-DNR Noise Reduction
4:3 Video format
Secondary video output for installation & maintenance
H.264/MJPEG Dual Streaming
Minimal Latency with up to 16 simultaneous user connections
Onvif Compliance
SD memory card slot for Local recording
12VDC Operation / Optional PoE (Power over Ethernet)
Available in Ivory or Black
VTD-13VN / VTD-20VN
ENVI Indoor 1.3 / 2.0 MegaPixel IP Dome Camera Series
1/3" 1.3 / 2.0 Megapixel Progressive Scan CMOS imager
Up to 30fps live view @ 1280x1024 / 1920x1080
2.8-10mm Varifocal Auto Iris Lens
2D-DNR Noise Reduction
4:3 Video format(1.3) 16:9 Video format(2.0)
Secondary video output for installation & maintenance
H.264/MJPEG Dual Streaming
Minimal Latency with up to 16 simultaneous user connections
Onvif Compliance
12VDC Operation / Optional PoE (Power over Ethernet)
Available in Ivory or Black

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
17
8. IP Installer: Introduction
IP Installer is a proprietary utility program for VitekIP products. It enables users of Vitek products
to search their network for any Vitek network camera, video server, or network video recorder no
matter what IP address it has. By using IP Installer, users will be able to facilitate network setup
process for Vitek products deployment.
Runs on Microsoft Windows operating system (XP, Vista, 7, 8)
Search for Network Cameras, Video Servers, and Network Video Recorders
Capable of firmware updating
Support automatic and manual IP setup
9. Installing and Uninstalling
** It’s recommended to install this program as an administrator **
9.1. Installing IP Installer
If the program is started from the CD supplied with Vitek products, insert the CD in to CD/DVD tray
and check the installation file. If it is download or copied from the Internet or any other media,
locate the file from the PC’s hard drive. You will see the icon as shown with the file name IP
Installer_Setup_x.x.x.exe. The actual file name in your case may vary as the version changes.
Double click the icon to start installation.

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
18
You may be prompted to continue running the installation program.
Click Yes button, then the following window will be shown on the screen.
To continue the installation, click Next. The following window will be displayed for location to
install.

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
19
The default location for installation is C:\Program Files\IP Installer. It is recommended to install
in this folder, if you want to change it to a different location, click the Browse button to choose
location. Now click the Install button. You will see the progress of theinstall as shown below.