VITINNI HB-2240T User manual

3 IN 1 HAND BLENDER
INSTRUCTION MANUAL
PLEASE READ AND KEEP THESE INSTRUCTIONS FOR FUTURE USE
MODEL NO: HB-2240T
SAP Code: JF07533001
For further assistance, other products and more, join us at:
Website: www.vitinni.co.uk
Instagram: @vitinniuk
Facebook: www.facebook.com/vitinni

11

General Safety Instructions
•Read the operating instructions carefully before using the Hand Blender for the first
time.
•This Hand Blender is designed for personal use and is not suitable for commercial
use.
•Do not use outdoors. Keep away from direct sunlight, heat sources and do not use
with wet hands.
•Before cleaning ensure the Hand Blender is switched off and the plug removed
from the socket.
Warning
•Before using, please ensure that your output voltage is the same voltage as stated
on the rating label of the Hand Blender.
•Before use please check the power cord and accessories of the Hand Blender, do
not use if there is any damage.
•Ensure the power cord is not hanging over any sharp edges or overhanging the
worktop.
•Do not plug in or use the Hand Blender with wet hands.
•Do not use the Hand Blender on a tablecloth or near curtains to avoid the risk of
burning.
•When in use do not use an external power cord connection.
•Failure to follow these instructions can result in damage to the appliance and harm
to the user. No liability is accepted if these instructions are not followed or if
damage results through improper use. Any attempt to alter the appliance or not
follow instructions may result in harm and will also void any warranty.
•The Hand Blender should be placed on a stable surface when in use.
•Do not place anything on the top of the Hand Blender.
•Do not use the Hand Blender for anything other than that specified in the operating
instructions.
•Do not leave the Hand Blender unattended when in use.
•After using the Hand Blender, press the power button to turn off, and then remove
the plug from the socket.
•This appliance shall not be used by children. Keep the appliance and its cord out of
reach of children.

•This appliance can be used by persons with reduced physical, sensory or mental
capacities or lack of experience or knowledge only if they have been given
supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
•Care should be taken handling the sharp cutting blades, emptying the bowl and
during cleaning.
Caution
•Do not immerse the power cord, plug or housing in water or under the tap during
cleaning.
•Unplug the Table Blender from the wall socket when not in use or before cleaning.
•Do not use any accessories other than those provided.
•Ensure the accessories are clean and dry before putting the food inside.
•If the power cord becomes damaged, it must be replaced by the manufacturer, its
service agent or a similarly qualified person.
•Keep the Table Blender and the power cable out of reach of children.
•The Table Blender must not be operated by means of an external timer or separate
remote-control system.
Before First Use
•Remove all packaging materials, stickers and labels.
•Clean with hot soapy water, using a non-abrasive sponge.
•Ensure the inside and outside of the Table Blender are completely dry.
Using Your Hand Blender
•Make sure the Hand Blender is complete and undamaged and that you have all the
accessories.
•Do not use the Hand Blender if it is visibly damaged.
•Check that your power supply voltage corresponds to that indicated on the rating
label.
•The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise
and baby food as well as for mixing and milkshakes.
Insert the blender bar into the motor unit and turn clockwise to lock it into motor unit as
shown.

•Put ingredients into a bowl or mixing jug.
•To prevent splattering, immerse the blade guard completely into the ingredients.
•Switch the hand blender on by pressing the switch I or switch II. You can adjust
speed by using the variable speed control.
•Blend the ingredients by moving the hand blender slowly up, down and in circles.
Whisk
•The whisk is used for whipping cream，beating egg whites and cake mixes as well
as ready-mix desserts.
•Insert the whisk into the motor unit and turn clockwise to lock as shown.

•Press the switch I to activate the hand blender, and then press the switch II after
approx 30 seconds to prevent ingredients splashing. Switch the hand blender on by
pressing the switch I or switch II
•You can adjust speed by using the variable speed control.
Cleaning
•Before cleaning, unplug the hand blender and detach the accessories.
•Wipe the motor unit, the chopper whisk coupling unit with a moist cloth, do not
immerse them in water.
•For stubborn food or cleaning the whisk, place a drop of washing up liquid in a bowl
with water.
•Plug into your wall socket.
•Immerse the blade or whisk and operate the unit for about 10 seconds.
•Unplug, rinse under running water, and then dry.
•If not used for a long period of time, ensure the hand blender is kept in a well
ventilated place to protect the motor
CAUTION
The cutting edges of the blades are very sharp, when cleaning please take care.
TECHNICAL SPECIFICATIONS
Model NO HB-2240T
Rated voltage 220-240V~50/60Hz

Guarantee
Our products are guaranteed for a period of 2 years from the date of purchase. Products that
develop a fault within this period are covered by our warranty and we will replace defective
parts, or where not available the whole product. The warranty does not apply to any defect in
the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any
third party, use otherwise than as recommended by us, failure to follow our instructions, any
alteration or repair carried out without our approval or has been the subject of commercial
use. Your statutory rights remain unaffected, in particular any rights you have under the
Consumer Rights Act 2015.
If you have a problem with your product within this warranty period please contact our
customer services team.
In the event of changes to the specification of a product and we are not able to replace
parts, we will replace the whole product within the 2 year guarantee period
For products that fall outside of the 2 year guarantee, we will endeavour to provide spare
parts to purchase for as many of the replaceable parts as possible, but cannot foresee
specification changes or upgrades to products or parts outside of the initial 2 year period.
Customer Services:
If you would like further advice or information on your product, ensure you have the
SAP code ready and please get in touch with us at Vitinni on the contact options
below:
SAP Code: JF07533001
Phone: [phone] (Mon – Fri 9am to 5pm)
Email: [e-mail]
Address: Vitinni, Vale Mill (Rochdale) Ltd, Robinson Street, Rochdale, OL16 1TA