VITINNI JF07521500 User manual

For further assistance, other products and more, join us at:
Website: www.vitinni.co.uk
Instagram: @vitinniuk
Facebook: www.facebook.com/vitinni
Stainless Steel Milk Frother
PLEASE READ AND KEEP THESE INSTRUCTIONS FOR FUTURE USE
SAP Code: JF07521500
2
Thank you for choosing our Vitinni Stainless Steel Milk Frother. Please read this
user manual carefully and keep it for future reference. The manufacturer and
importer do not accept any liability if the information in these operation instructions is
not complied with. If you need any assistance, please contact our customer service
team on the details provided on the back page of this manual.
SAFETY INSTRUCTIONS
This product is for domestic and indoor use only.
This appliance is for domestic use only and should not be used for commercial
purposes.
Check that the voltage on the rating plate corresponds with that of the local network
before connecting the appliance to the mains power supply.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge providing they have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards involved. Cleaning and
user maintenance shall not be undertaken by children unless they are older than 8
years and supervised.
This is not a toy - children should be supervised to ensure they do not play with the
appliance. Keep the appliance and its cord out of reach of children less than 8 years.
If the appliance, power supply cord and plug are malfunctioning or they have been
dropped or damaged switch off the appliance and discontinue use immediately.
This appliance contains no user serviceable parts. Repairs should only be
undertaken by the manufacturer, its service agent or a similar qualified person.
If the power supply cord is damaged, it must be replaced by the manufacturer, its
service agent or a similar qualified person in order to avoid a hazard.
Keep the power supply cord away from sharp edges and parts of the appliance that
may become hot during use. Do not allow the power supply cord to overhang the
worktop.
Do not use this appliance with an extension lead or multiple socket adaptor.
Do not use this appliance near an open flame or in moist or damp conditions.
Allow sufficient space around the product for ventilation and heat dissipation. Place
on a flat, stable, heat resistant surface a minimum distance of 5 to 10 cm from walls
and other items.
Do not leave the appliance unattended whilst connected to the mains power supply.
Switch off the mains power supply and remove the plug by hand.

3
Always disconnect the appliance from the power supply before assembling,
disassembling or performing cleaning or maintenance.
Do not immerse the product, cordless power base, power supply cord or plug in
water. Care should be taken to avoid spillage on the electrical components, power
cord and plug. Do not operate the appliance with wet hands.
Do not use any accessories or attachments with the appliance that have not been
supplied or recommended by the manufacturer.
Make sure the socket used is freely accessible at all times, enabling the appliance to
be unplugged when necessary.
Caution: Misuse of the appliance could cause injury – do not use the appliance for
anything other than its intended use
Caution: Hot surface. To avoid injury do not touch the hot or heated
surfaces of the Milk Frother. The heated surfaces and heating element may contain
residual heat and still be hot after use. Allow the Milk Frother to cool fully before
moving or handling.
Do not overfill the Milk Frother past the maximum mark. If the Milk Frother is
overfilled, hot milk may be ejected
To avoid electrical hazards, the Milk Frother should only be used with the power
base provided
Hot Milk and Steam can be released from the Milk Frother during use and can cause
serious injury, scalds and burns. Allow the warming and / or frothing cycle to finish
before removing the Milk Frother from the power base. Exercise caution when
handling the Milk Frother.
WARNING: Do not open the lid while the milk is heating and/or frothing.
WARNING: Spillage on the connector can cause an electrical hazard. If spillage
occurs disconnect the power and let the power base dry thoroughly before re-use.
CLEANING AND MAINTENANCE
Unplug the product from the mains power supply and allow to cool fully before
performing any cleaning or maintenance.
Remove the lid and Milk Frothing Attachment from the Milk Frother Body and wash
in warm, soapy water. Rinse and leave to dry naturally.
Wipe the inside and outside Milk Frother Body with a soft damp cloth and a small
amount of mild detergent taking care to avoid wetting the cordless connector on the
underside. Leave to dry naturally.
4
Wide down the cordless power base with a soft damp cloth and a small amount of
mild detergent taking care to avoid wetting the cordless connector. Leave to dry
naturally.
The Milk Frother, all attachments and accessories are not dishwasher safe.
Do not use solvents, abrasives, strong detergents or alcohol to clean the appliance
as this will damage the finish of the product.
STORAGE
Before storing, ensure that the Milk Frother is cool, clean and dry.
Reassemble all of the parts and wrap the power cord loosely around the body of the
Milk Frother. Never wrap the cord tightly to avoid causing damage.
Store in a cool, dry place away from direct sunlight.
DESCRIPTION OF PARTS
1. Transparent Lid 5. Cold Froth Button ( )
2. Milk Frothing Attachment 6. Handle
3. Milk Frother body 7. Cordless Power Base
4. Hot Function Button ( )
1.
2.
3.
4.
5.
6. 7.

5
BEFORE FIRST USE
Before use, remove all packaging materials. Check all accessories are complete and
that the equipment is not damaged. The product should be cleaned according to the
instructions in the Cleaning and Maintenance section. The product should be run
through an operational cycle before it is used for the first time.
When using the product for the first time a slight odour may be emitted. This is
normal and will soon subside.
INSTRUCTIONS FOR USE
1. Place the Cordless Power Base on a flat, stable, heat resistant surface.
2. Remove the Transparent Lid and Milk Frothing Attachment from the Milk
Frother Body.
3. Pour the desired quantity of milk into the Milk Frother Body. Do not add more
than 150ml of milk if frothing and no more than 350ml if heating only . Ensure
the level of milk is above the minimum capacity mark.
4. Insert the Milk Frothing Attachment into the Milk Frother Body if the milk is to
be frothed. Replace the Transparent Lid and press down gently to seal.
5. Place the Milk Frother Body onto the Cordless Power Base then plug in and
switch on the Milk Frother at the mains power supply.
6. To heat the milk press the Hot Function Button ( ). The Function Button
will light red while the heating cycle is in progress.
To heat and froth the milk press the Hot Function Button ( ) twice. The
Function Button will flash red while the heating and frothing cycle is in
progress.
To froth the milk without heating press the Cold Froth Button ( ). The Cold
Froth Button will light blue while the frothing cycle is in progress.
7. When the heating and/or frothing cycle has finished the illuminated button will
extinguish. Wait a few seconds for the milk to subside then remove the lid.
8. Remove the Milk Frother body from the Cordless Power Base using the
handle and pour out the heated and/or frothed milk.
9. Ensure that the Milk Frother is cleaned according to the Care and
Maintenance instructions after each use.
6
TROUBLESHOOTING
SPECIFICATION
WEEE INFORMATION
The symbol on this product or its packaging means that this product may not
be treated as household waste. It should be handed to an appropriate collection
point for the recycling of electrical and electronic equipment. Contact your local
council or household waste disposal service for further information.
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities.
Problem Cause Solution
The Milk
Frother does
not switch on
The Milk Frother is not
plugged in or switched on at
the mains power supply.
Plug in and switch on at the
mains power supply.
There is little
or no froth
on the milk
The Milk Heating only
function has been selected.
Press the Hot Function
Button twice for heated and
frothed milk.
For cold frothed milk
replace the milk in the Milk
Frother with fresh milk and press
the cold froth button
The milk is too hot. Use milk at refrigerator
temperature to start.
After cleaning the whisk has
been removed from the Milk
Frothing Attachment, the
whole accessory is absent or
incorrectly positioned.
Insert the whisk into the Milk
Frothing Attachment, and make
sure the accessory is correctly
positioned in the appliance.
The milk
overflows
Too much milk has been
placed into the Milk Frother.
Always respect the MAX quantity
marking when pouring milk into
the Milk Frother.
The appliance is standing on
a sloping surface.
The appliance must always be
operated on a flat,
stable, heat resistant
surface.
Rated Power: 500W Maximum frothing
capacity: 150ml Milk
Voltage: 220-240V Maximum warming
capacity: 350ml Milk
Frequency: 50/60 Hz

Guarantee
Our products are guaranteed for a period of 2 years from the date of purchase.
Products that develop a fault within this period are covered by our warranty and we
will replace defective parts, or where not available the whole product. The warranty
does not apply to any defect in the goods arising from fair wear and tear, wilful
damage, accident, negligence by you or any third party, use otherwise than as
recommended by us, failure to follow our instructions, any alteration or repair carried
out without our approval or has been the subject of commercial use. Your statutory
rights remain unaffected, in particular any rights you have under the Consumer
Rights Act 2015.
If you have a problem with your product within this warranty period please contact
our customer services team.
In the event of changes to the specification of a product and we are not able to
replace parts, we will replace the whole product within the 2 year guarantee period
For products that fall outside of the 2 year guarantee, we will endeavor to provide
spare parts to purchase for as many of the replaceable parts as possible, but cannot
foresee specification changes or upgrades to products or parts outside of the initial 2
year period.
7
Customer Services:
If you would like further advice or information on your product, ensure you have the SAP
code ready and please get in touch with us at Vitinni on the contact options below:
SAP Code: JF07521500
Phone: [phone] (Mon – Fri 9am to 5pm)
Email: [e-mail]
UK Address: Vitinni, Vale Mill (Rochdale) Ltd, Robinson Street, Rochdale,
OL16 1TA, UK
EU Address: Vitinni, Delu-Ako Minky GmbH, Hauptstraße 103, 53619, Rheinbreitbach,
Germany