viveroo LockingSystem User manual

Installation guide and !
operating instructions
LockingSystem security.
Key-based locking system to protect iPad from theft. For viveroo free."
Includes
-Locking plate to fasten to free, with fastening
material
-Removable locking bar
-Key hole barrier, two keys
-Installation guide and operating instructions
This installation guide explains how to install the
security locking system for viveroo free. security has
either been pre-installed or can be retrofitted. If
security has been pre-installed, please continue with
Step 3.
Step 1
Deinstall free. (Please see installation guide free,
Chapter Mounting, Step 4).
Step 2
Fasten the locking plate on the back of free using the
fastening screws included (2mm hexagon socket
screws).
Remount free.

Installation guide and !
operating instructions
LockingSystem security.
Key-based locking system to protect iPad from theft. For viveroo free.
viveroo GmbH - Wewelsburger Str. 4 - 33154 Salzkotten, Deutschland - T [phone] - [email protected] - www.viveroo.com
Step 3
Place the iPad in free. Put the locking bar on the
locking plate from the left. The keyhole will be
pointing down.
Step 4
Insert the keyhole barrier and the key into the locking
bar from below. Turn the key to the left and remove
it. Free is now locked and the iPad is protected from
theft.
To unlock free, insert the key and turn it to the right.
The key and the keyhole barrier can now be removed
by pulling downward and the locking bar can be
removed by sliding it off sideways.
! Please note: Store keys in a safe spot and identify
them well. Without a key, the locking system can
only be opened by force and will be damaged!