Vivitar® VM175BT
Bluetooth® Speaker
User Guide
Thank you for purchasing the Vivitar® VM175BT
Bluetooth® Speaker.
Introducon
With this speaker, you will enjoy listening to high quality
music wirelessly using Bluetooth® technology. Easily
connect to any mobile device for both conversaon and
music listening. It also pairs with other Bluetooth-en-
abled devices (Bluetooth V4.1+EDR specificaon and
HSP, HFP, A2DP and AVRCP profiles).
Specificaons
• Bluetooth Specificaon: V4.1+EDR
• Operaon Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operaon Range: Up to 33 feet(10 meters)
• Talk Time: 4 hours
• Play Time: 2 hours
• Standby Time: 10 hours
• Baery Type: 400mAh, 3.7V, Polymer Lithium Ion
Baery
• Charge Time: 2 Hours
Important!
Ensure that the baery is fully charged if the speaker is
not used for a long period of me. To avoid a complete
discharge of the baery, charge the speaker at least
every six(6) months.
Baery Notes
• A fully charged baery provides up to four(4) hours of
talk-me, two(2) hours music playback, and up to
ten(10) hours of standby me. Talk and standby mes
vary depending on mobile phones or other
compable Bluetooth® devices, sengs, styles, etc.
• When the baery power is low, the speaker will beep
every 30 seconds.
• When using with your iPhone, an addional baery
meter feature will display the remaining baery on
your phone’s touch screen.
Pairing with your Phone
1. Place the speaker in close range of a Bluetooth®-en-
abled mobile phone.
2. Press and hold POWER buon for three(3) seconds.
Unl indicator lights flash blue and red.
3. Set your mobile phone to pairing mode (as explained
in operang instrucons for your phone) and search
for Bluetooth® devices.
First Time Use
Charging the Baery
The VM175BT Speaker has a built-in, rechargeable
lithium-polymer baery. To avoid damage, do not
aempt to remove the baery. The full performance of
the baery is achieved aer two or three charging-dis-
charging cycles. Charge the baery fully before first use.
1. Connect the USB cable to the speaker.
2. Connect to the correct outlet (wall, computer, car
charger).
3. When the charger is connected to the speaker, the red
indicator light will turn on.
Note: Charging the baery fully may take up to 2 hours.
4. When the baery is fully charged, the red indicator
light will turn off. Disconnect the charger from the
speaker and the outlet. The speaker is ready for use.
Note: Overcharging could reduce the life of the baery. A
charged baery will lose its capacity if it is not used
on a regular basis.
In the Box
• VM175BT Bluetooth® Speaker
• USB Charging Cable
• AUX Cable
• User Manual
Safety Precauons
• Please read this User Manual carefully and follow all
instrucons.
• To avoid damage or malfuncon of the speaker do not
drop it from high locaons and/or on to hard surfaces,
do not place heavy objects on it.
• Keep speaker away from humidity, water and other
liquids. If it does get wet, do not operate as this may
cause an electrical shock, explosion and damage to the
device or to the user.
• Do not place or keep this product near heat sources,
such as direct sunlight, radiators, stoves or any other
apparatus that produces heat. This may cause an
explosion, degrade the performance and/or reduce
baery life.
• Do not modify, repair or disassemble device (especially
the baery). Doing so will void the warranty. The
baery in this device may present a risk of fire or
chemical burns if misused or tampered with.
• Use only supplied and manufacturer-approved chargers
and unplug this device when not in use for long periods
of me or during lightning storms.
FCC Statement
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
Note:The manufacturer is not responsible for ANY
interference, for example RADIO or TV
interference, caused by unauthorized modificaons
to this equipment. Such modificaons could void
the user's authority to operate the equipment.
EC Declaraon of Conformity
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV
interference, caused by unauthorized modificaons
to this equipment. Such modificaons could void
the user's authority to operate the equipment. This
product is CE cerfied according to the provision of
the R&TTE Direcve (99/5/EC). This declares that
this product is in compliance with the essenal
requirements and other relevant provisions of
Direcve 1999/5/EC. Please note that this product
uses radio frequency bands not harmonized within
EU. Within the EU this product is intended for use
in Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Ireland, Italy, Luxembourg, the
Netherlands, Portugal, Spain, Sweden, and United
Kingdom and within EFTA in Iceland, Norway and
Switzerland.
Locaon of Controls
① Next Track / Volume +
② Power / Play / Pause / Answer
③ Indicator LED
④Microphone
⑤ Previous Track / Volume –
⑥Auxiliary Port
⑦Charging Port
FrontBack
①
②
③
④
⑤
⑥
⑦
This device complies with Part of the FCC Rules
15