Package Contents
Display VKA05 OPS Module
(with Antenna) Remote Control Power Cable
Wall Mount VGA Cable USB Cable Audio Cable
Stylus x 3 Documentation CD Batteries Quick Start Guide
Installing the OPS Module
Ports and Connectors (Right)
With Android OPS Module Installed
Ports and Connectors (Bottom)
Display Overview (Rear)Display Overview (Front)
1Remove the 2 screws
securing the slot cover
onto the display, and then
remove the slot cover.
3Tighten the two captive
screws on the OPS
module until the module
is properly secure in the
display, and then install
the antenna.
2Slide the OPS module into
the OPS slot.
1Magnetic Stylus Holder 6Input Source / Settings Button
2IR Sensor (for Remote Control) 7Volume Down Button
3Power Button / Status Indicator LED 8Volume Up Button
4Home Button 9USB 3.0 Port
5Back Button 10 USB 2.0 Ports x 2
1Right Handle 6Power Socket 11 HDMI Out Port
2Windows OPS Slot 7Speakers 12 USB 2.0 Port
3Wall Mount Screw Holes 8Antenna Connector 13 HDMI In Port 1 (2.0)
4Left Handle 9Power Indicator LED 14 HDMI In Port 2 (1.4)
5Power Switch 10 microSD Card Slot 15 Touch Port 1
1 2 3 4 5 6 7 8 9 10
16 DisplayPort In Port 21 LAN (RJ-45) Port 26 Audio Out Jack
17 VGA In Port 22 HDMI In Port 3 (1.4) 27 USB 2.0 Port
18 USB 3.0 Port 23 Audio In Jack 28 AV In Port
19 Recovery Button 24 Touch Port 2 29 RS-232 Port
20 USB 3.0 Ports x 2 25 Coax Out Jack 30 [DISABLED] LAN (RJ-45) Port
LAN
HDMIOUTUSB2.0
MicroSDUSB3.0RECOVERY
USB3.0VGAINAUDIOINDPINHDMIIN3(1.4) TOUCH2TOUCH1HDMIIN2(1.4)HDMIIN1(2.0)
USB2.0AVIN COAXOUTRS232 AUDIOOUTLAN
1 2 3
5 6 7
4
USB 2.0AV IN COAX OUTRS232 AUDIO OUTLAN
25 26
27 28 29 30
8 9
2019
10
21
11 12 13 14 15 16 17 18
22 23 24
LAN
HDMI OUT USB 2.0
Micro SDUSB3.0RECOVERY
USB 3.0VGA INAUDIO INDP INHDMI IN 3(1.4) TOUCH 2TOUCH 1HDMI IN 2(1.4)HDMIIN 1(2.0)
Quick Start Guide
(For LK6530i, LK7530i and LK8630i models)