Viz-Art Automation VIZBOX Slim User manual

LIST OF ITEMS:
enclosure
adjustable arm with mount
mounting set
installation manual
installation template
1. Installation:
A. Prepare an installation place and mark mounting
points using installation template as below:
B. Install element A to the ceiling. Use the selected
pins and screws from the assembly kit.
C. Remove element B from guide C from protection
cover.
D. Install projector on projector mount B.
Warning! To connect the mount with the projector, select
the appropriate screws from the mounting kit according to
the recommendations of the projector manufacturer.
VIZBOX
Protection Cover for multimedia projector:
VIZBOX Slim
VIZBOX Slim 54-80
VIZBOX Slim 27-116
1/2

E. Install projector (mounted on element B) on guide C
in a cover.
F. Using screws install front D to a cover. Then
install cover to a element A (already installed
to the ceiling).
G. Adjusting projector image. If projected image
needs to be adjusted, loosen the appropriate screw
E, F or G and tilt the cover (with projector inside)
into a proper position. After obtaining the correct
position of the projector, tighten screws.
2. Technical Specification:
Capacity:
VIZBOX Slim - 15 kg
VIZBOX 54-80 - 15 kg
VIZBOX 72-116 - 15 kg
Adjustment:
Up-Down
Left-Right
Tilt
Weight of unit:
VIZBOX Slim 10,5 kg
VIZBOX 54-80 12,2 kg
VIZBOX 72-116 13 kg
3. Mounting kit set :
bolts:
M4x20 –4 pcs.; M5x20 –4 pcs.;
M6x20 –4 pcs.; M8x20 –4 pcs.;
washers:
ø4x9 – 4 pcs.; ø5x10 – 4 pcs.;
ø6x12 – 4 pcs.; ø8x16 – 4 pcs.;
dowels :
ø8x40 – 4 pcs.
screws:
ø5x40 z Flat head –4 pcs.
manufactured: VIZ-ART Automation
tel.[phone] www.viz-art.pl
2/2