VIZiD DFL200 User manual

1
Facial Door Lock
USER MANUAL
DFL 200

1、 Verify mode
Face, palm, password, card, key multi verify modes.
A．Face verify
When user touch power key, device enter verify mode, compare the facial in a proper way:
put the face in the center of the screen, the distance is around 30-80cm. After verified success, the
lock will say “Opened!”
B．Palm verify
When user touch power key, device enter verify mode, compare the palm in a proper way: put
the palm in the center of the screen, the distance is around 20-35cm. After verified success, the
lock will say “Opened!”
Notice: Make sure to keep space between your fingers. And center the palm inside the green
box.
C．Password verify
When user touch power key, device enter verify mode, then touch password key enter
password verify interface.
Input the password which already enrolled, press OK. After verified success, the lock will
say “Opened!” If failed, lock return to verify mode. Please note, default admin code is 123456
when you get lock. You can change after you have it.
D．Card verify
When user touch power key, device enter verify mode, punch enrolled card on the top
left corner. After verified success, the lock will say “Opened!”
2、 Enter MENU
When user touch power key, device enter verify mode.
Press to enter MENU. If already enrolled admin (for standard user 1-5 is admin) ,
device will show “Manager Confirm”, please press the button on the left corner and verify admin
with face, palm, password or card to enter MENU.(default admin password is 123456)
VER: 2021DFL200
USER MANUAL

3、 Employee
There are “Register” and some user list under employee option.
Press “Register” to add new user. Press user id to edit user information.
【Register】：
ID：Each user has one user id, it is created auto by system, can not change.
PalmVena：Register user palm.
Face：Register face.
Password：Register password.
Card：Register card.
Privilege: Set privilege, user or admin.
Delete: Delete user.
A、 Register Palm
Press “Palm Vena”, system will give voice prompt “Put your palm vena in the green place”,
as below:
Keep the palm parallel to the camera, the distance is around 20-35cm. System will capture
the palm information and make “Di” “Di” “Di”. If palm positon is wrong, system will stop
capture(no “Di”), please adjust your palm.
Notice: Make sure to keep space between your fingers. And center the palm inside the green
box.
B、 Register Face
Enter register face option, system will prompt “Put your eyes in the green place”.
Please adjust your face and put your eyes in the green place. System will prompt “Di”

“Di” ”Di” and capture your face.
The face distance is around 30-80cm.
C、 Register Password
Enter password option, input user password twice and press ok to save.
Max: 8 digital password.
D、 Register Card
Enter card option, system will prompt “Scan Card”, punch your card in upper left corner of
IC card inductive zone, press “Set” once it reads the card number.
E、 Privilege
User number from 1 to 5, they are admin. They can enter main menu through their face,
password or other method.
F、 Delete
Choose one user id in user list then press “7. Delete” to delete this user.
4、 Device Set
Set some parameters in【DevSet】
4.1．General
Language：Set language, include English and Chinese.
DateFormat：Set date format.
Volume：Set the voice volume, value 1-8.
4.2．Advance
Delete All Rec：Delete all unlock records.
Delete All Reg：Delete all users.
Defult Setting：Restore all the parameters to factory setting. This operation won’t delete
users.
Upload Firmware：Update firmware. Caution!
4.3. Date&Time

Date&Time：Set lock date and time.
4.3. Set Door
Motor Delay(ms)：Set signal length of lock motor. Caution!
Rotation：Set motor rotational status. Caution!
Unlock Delay(s)：Set unlock delay. Caution!
5、 Device Test
【DevTest】Test the main parts working status. Caution!
6、SysInfo
【SysInfo】View device information.
6.1. All Space Info
View device user, palm, face, password and card capacity.
6.2. Reg.Data
View the enrolled number of user, palm, face, password and card.
6.3.View Log
View all unlock records.
6.4. Product Info
View device firmware version, production time and so on.
7. Installation Notice
7.1 . Right/Left Open