VKP Brands Kitchen Crop VKP1248 User manual

Instruction Manual
THE
GRAIN MILL

Table of Contents
*For the most up-to-date manual, or for more information regarding
this product, visit our website: VKPbrands.com
Product Overview........................................................................................2
Operating Precautions.................................................................................4
Cleaning and User Maintenance ................................................................5
Helpful Tips..................................................................................................5
Mounting Instructions ................................................................................6
Assembly Instructions.................................................................................7
Use Instructions ...........................................................................................8
Grain Mill Troubleshooting Guide ...........................................................9
Wheat Dough Recipe ................................................................................10
Notes............................................................................................................11
Product Warranty.......................................................................................12
Product Overview
Congratulations on your purchase of The Grain Mill! You will nd it to be
a very valuable tool to have on hand. You’ll enjoy the natural, wholesome
avors of home-ground ingredients, prepared fresh and free from all the
preservatives and additives contained in commercially processed foods. The
Grain Mill will serve you well for years to come.
Caring well for The Grain Mill will help it last, so be sure to read through
all the instructions contained in this manual before using your product for
the rst time.
The basic procedure is simple. Once The Grain Mill arrives, inspect it
thoroughly and wipe all parts with a damp cloth. Assemble it according to
the instructions, then mount it to a stable, solid work surface. Adjust the
coarseness by using the adjustment knob. Last, add grain to the hopper and
start the grinding process.

Parts Diagram:
Your complete grain mill includes everything shown below:
Parts List:
(1) VKP1248-1 Hopper
(2) VKP1248-5 Body
(3) VKP1248-7 Clamp Assembly
(4) VKP1248-6 Handle
(5) VKP1248-4 Milling Cone and Shaft Assembly
(6) VKP1248-3 Milling Ring
(7) VKP1248-2 Adjustment Knob
All replacement parts and optional motor are available on our website,
VKPbrands.com.
(2)
3
(1)
(3)
(4)
(5)
(6)
(7)
Optional Electric Motor is available at VKPbrands.com

4
Operating Precautions
Read and follow ALL instructions and warnings before operating
The Grain Mill for the rst time. If certain precautions are not
taken, damage to The Grain Mill and/or injury to persons could
result.
• DO NOT turn the handle of The Grain Mill if it is empty. This
will damage the milling head.
• Never put any foreign objects into the Grain Mill. Small rocks or
pieces of metal could damage the milling cones.
• Do not use to grind salt, this will damage the milling teeth.
• Avoid contacting moving parts.
• Never put ngers near the milling cone shaft while the Grain Mill is
being operated, as that could cause serious injury.
• Using tools to tighten the adjustment knob will damage the
Grain Mill and void the warranty. Tighten the adjustment knob
only by hand.
• Do not operate the Grain Mill without the clear plastic hopper in
place.
• Never operate the Grain Mill if any parts are missing or damaged.
• Always make sure the Grain Mill is clamped securely to a sturdy
surface before assembling and using.
• Do not clean any part of the Grain Mill in a dishwasher.
• Not intended for use by children.
• For household use only.

5
Cleaning and User Maintenance
To ensure The Grain Mill works properly at all times, please follow the care
and handling instructions below:
• When you receive The Grain Mill, dismantle all parts and wipe them
off using a damp cloth to remove any residue from manufacturing and
packaging.
• Small parts are easily lost, so be sure to handle them with care.
• After each use, The Grain Mill can be easily cleaned with a damp, soft
brush or soft cloth.
• If thorough cleaning is necessary, hand wash The Grain Mill in warm
water and dry all parts thoroughly before reassembly.
• Do not leave any part of The Grain Mill soaking in water.
• Do not clean any part of The Grain Mill in a dishwasher.
Helpful Tips
1. The rst time you use The Grain Mill, be sure to dispose of the
rst 2-3 cups of grain which has been ground, as it may contain
metal residue from the manufacturing process.
2. We suggest always starting The Grain Mill adjusted to the nest setting.
However, if you started grinding on a coarse setting and need to adjust
back to ne, then turn the handle counter-clockwise for 2-3 full
rotations while tightening the adjustment knob to the desired setting.
3. Grind white rice through The Grain Mill to remove any build up
caused by normal use.
4. Not recommended for grinding popcorn kernels. They are very hard
and it will be very difcult to crank the handle. If using the optional
motor (sold separately), grinding popcorn kernels can damage the
motor.
Scan to see e Grain Mill Assembly & Use Video
VKPbrands.com/videos.php?v=the-grain-mill-use

6
Mounting Instructions
Choose a rm, sturdy surface when mounting The Grain Mill. The best
surfaces are built-in counter tops and heavy tables, like a dining room table.
These types of surfaces ensure The Grain Mill can remain in place while
grinding.
Place The Grain Mill body on the edge of the mounting surface. Open the
clamp screw as wide as it will go by turning counter-clockwise. Then push
the clamp assembly forward into the slot on the mill body, so the body and
clamp assembly sit ush with the edge of the surface. Twist the clamp
screw clockwise until it is tight and The Grain Mill is securely in place (see
mounting diagrams below).
Mounting surface
is too round or
oddly shaped.
Mounting surface
is too thin.
Mill body and
clamp assembly
are not ush with
mounting surface.
Mill body is ush
but clamp
assembly is not
pushed ush with
mounting surface.
Incorrect
Correct

7
1 2
34
5 6
With your Grain Mill now clamped correctly to a
sturdy surface, insert the milling ring through the
front of The Grain Mill body.
Screw the adjustment knob onto the threads on
the back of the milling cone shaft assembly just
until it is snug. Do not over-tighten.
Place the hopper on top of The Grain Mill
by sliding it from the front, making sure it is
pushed all the way back.
Insert the milling cone and shaft assembly
through the front of The Grain Mill body.
Push the handle into the shaft on the back
of The Grain Mill by lining up the tabs on
the handle with the grooves in the shaft.
Place a shallow bowl or pan in front of The
Grain Mill, under the milling cone, before
you begin the grinding process.
Assembly Instructions

8
Use Instructions
DO NOT turn the handle if the Grain Mill is empty. This will
damage the milling head.
Now that you have assembled your Grain Mill properly, read through
ALL of the following instructions before you start the grinding
process.
The rst time you use the Grain Mill be sure to dispose of the rst
2-3 cups of grain which has been ground as it may contain impurities
from the manufacturing process.
1. Before you put grain into the hopper,
select the desired coarseness you
want for your our by turning the
adjustment knob, clockwise for ne and
counter-clockwise for coarse (see
diagram at right).
2. Never use tools to tighten the
adjustment knob, as it will damage
the mill.
3. For best results, adjust the knob clockwise to the nest setting, just
until the knob is snug, then turn the knob counter-clockwise 1/2 turn
to prevent over tightening and possible damage to the milling cone. As
you grind, you can adjust the knob counter-clockwise, for a coarser
texture, if that is what is desired.
4. Once you have your adjustment knob set, pour grain into the hopper.
The Grain Mill holds 2 cups of grain, which yield approximately 3 cups
of ne our, depending on the grain.
5. Turn the handle clockwise to begin grinding.
6. *TIP - If the grain mill is grinding too coarse, you can adjust it to be
ner by turning the handle counter-clockwise 2-3 full rotations while
tightening the adjustment knob towards the ne setting.
Optional Electric Motor is available at VKPbrands.com
Scan to see e Grain Mill Assembly & Use Video
VKPbrands.com/videos.php?v=the-grain-mill-use

9
GRAIN MILL TROUBLESHOOTING GUIDE
PROBLEM SOLUTION
The Grain mill rocks from side to
side when the handle is cranked.
The Grain Mill is not properly
mounted and clamped. See p. 6 for
mounting instructions. Also, make
sure the surface you are using is
sturdy and immovable, such as a
built-in counter top.
The grain mill only grinds
coarse no matter what I do.
See p. 7 for proper assembly
instructions and p. 8 for Use
Instructions. Be sure to read all
steps carefully. If the problem
persists, contact customer service at
866-257-4741.
I am trying to grind (X) and
it doesn’t seem to be working.
Contact customer service at
866- 257-4741.
When I turn the handle, very little
or no our comes out.
Carefully follow the Use
Instructions on p. 8 and make
certain, after you tighten the
adjustment knob, you turn it back
at least 1/2 turn. An overly-
tightened adjustment knob can
damage the milling cone.

10
Wheat Dough Recipe
½ c. Butter, melted
½ c. Sugar
2 c. Water, very warm
2 tbsp Active Dry Yeast
In a stand mixer, beat the above ingredients well. Then add:
2 c. White Wheat Flour
2 Eggs, beaten
2 tsp Salt
Once all of the ingredients are mixed together, add 3-4 more cups of
regular white our, a little at a time, checking the consistency of the dough
constantly. When nished, the dough should feel very sticky. Let the
dough rest for 5 minutes, then mix for 5 more minutes. Using 1 tbsp of
cooking oil, coat a large bowl thoroughly. Remove dough from the stand
mixer and place into the pre-greased bowl. Rub the dough around in the
bowl, so the outside of the dough also becomes coated in oil. Then, cover
and let rise until double in size, or until an impression remains when
poked. Punch dough down and let rise another 10 minutes.
For Bread Loaves:
Divide dough in half, shape, and place into two greased, 8.5” X 4.5” loaf
pans. Let rise in loaf pans until double in size. Then bake in oven, at
350°F, until golden brown, or when loaves sound hollow when
tapped. Remove from pan and let cool on a wire cooling rack.
For Basic Rolls:
Form dough into 2-inch balls, place onto a greased baking pan and let rise
for 15 minutes. Bake in oven at 350°F for 20-30 minutes, or until rolls are
golden brown. Remove from oven and let cool.
For Cinnamon Rolls:
Roll dough out on a oured surface, into a rectangle. Pour ½ c. butter onto
dough and sprinkle with any of the following toppings: Cinnamon, sugar,
brown sugar, nuts and/or raisins. Roll up the dough, starting with the short
side. Once rolled, pinch the edge closed and cut into 1 ½ inch rolls. Place
cut rolls onto a greased baking pan and let rise for 15 minutes. Bake in
oven at 350°F for 20-30 minutes, or until rolls are golden brown. Remove
from oven and glaze with the frosting of your choice.
For Orange Rolls:
Roll dough out on a oured surface, into a rectangle. Pour ½ c. butter onto
dough and sprinkle with any of the following toppings: orange zest and
orange juice. Roll up the dough, starting with the short side. Once rolled,
pinch the edge closed and cut into 1 ½ inch rolls. Place cut rolls onto a
greased baking pan and let rise for 15 minutes. Bake in oven at 350°F for
20-30 minutes, or until rolls are golden brown. Remove from oven and
glaze with a powdered sugar and orange juice frosting.

11
Notes

Product Warranty
Register your warranty online at:
VKPbrands.com/Warranty
Model VKP1248 - The Grain Mill Warranty: 5 years
Designed and Assembled in the USA of Domestic and Foreign Components
We are condent in the quality of our products and back each one with a
limited warranty for the length of time specied above. Should you
experience any problems with your product, please contact our Customer
Service Department.
All warranty claims must be accompanied by a proof of purchase and are
only valid if the appliance has been operated within the U.S. or Canada and
used for its intended purposes. These products are for household use only.
Items Not Covered:
• Return shipping costs or returned items lost in transit.
• Damage to the product due to accident, misuse, abuse, negligence, or if
the appliance has been altered in any way.
• Products used outside of the United States or Canada.
Kitchen Crop is a trademark of VKP Brands
© Copyright 2021 VKP Brands, all rights reserved
1804 Sandhill Rd
Orem UT, 84058
Phone: [phone]
VKPbrands.com